TomTom One 3 Edition Manual

TomTom ONE 

What’s in the box1.
2
What’s in the boxaYour TomTom ONE
ACharging light
B On/off button
C Reset button
D Speaker
E USB connector
F RDS-TMC connector
b Car charger cDocumentation pack
d Windscreen 
holder e
USB cable
A
B
C
D
F
E 

Before you start...2.
3
Before you start...
Switching on and off
To switch your TomTom ONE on or off, press and hold the On/Off button for 
2 seconds. The first time you switch on , it may take a short while for your 
device to start.
Note : In rare cases, your ONE may not start correctly. If this happens, press 
the reset button, then switch on the device again.
Setting up
To set up your TomTom ONE you need to answer a few questions by tapping 
the screen.
Important : Take care to select the correct...

4
Windscreen holder
Use the windscreen holder to install your TomTom ONE inside your car.
To attach the holder, press the suction cup firmly to the windscreen in your 
car, in an area of the windscreen where the glass is flat.
Make sure that both the holder and your windscreen are clean and dry before 
you attach the holder. Place the holder so that it does not interfere with your 
view of the road.
Take care of your TomTom ONE
Never leave your TomTom ONE or accessories on view when you leave the 
car...

Driving View3.
5
Driving ViewWhen your TomTom ONE starts, you are shown the Driving View along with 
detailed information about your current location.
Tap the centre of the screen at any time to open the Main Menu.
Note: The Driving View is shown in black and white until your ONE locates 
your current position.
ATap + and - to zoom in and out.
B Your current position.
C The name of the next major road or ro ad sign information, if applicable.
D Navigation instruction for the road ahead.
Tap this area to...

Making your first journey4.
6
Making your first journeyPlanning a route with your TomTom ONE is easy. To plan your first route, 
follow the steps below.
Important : You should always plan your journe y before you start driving. It is 
dangerous to plan a route while driving.
1. Tap the screen to bring up the Main Menu.
Note: The buttons on your ONE are shown in full colour unless a button is 
currently unavailable. For  example, the button named  Find alternative... in 
the Main Menu is not available...

7
In other countries you can enter a postcode to identify a town or area. You will 
then have to enter a street and house number.
•Crossing or intersection  - tap this button to set your destination as the 
point where two streets meet.
For your first journey, we will enter an exact address.
4. Tap  Street and house number.
Note: When planning a trip for the first ti me your ONE asks you to choose a 
country. Your choice is saved and used for all routes you plan.
You can change this setting at any time...

8
9. When the route has been calculated, tap Done.
Your ONE will immediately begin to guide you to your destination, using both 
spoken instructions and on-screen directions.
Arrival times
When you plan a route, your TomTom ONE asks you if you need to arrive at a 
particular time.
Tap  YES to enter a preferred arrival time.
Your ONE calculates your arrival time  and shows you whether you will arrive 
on time.
You can also use this information to work  out when you need to leave. If your 
ONE shows that...

9
What are the other navigation options?
When you tap Navigate to..., you can set your destination in many ways, not 
just by entering the address. The other options are listed below:
Planning a route in advance
You can also use your ONE to plan journeys in advance by selecting both your 
starting point and your destination. Yo u could, for example, do the following:
Home
Tap this button to navigate to your Home location.
You will probably use this button more than any other.
For information about...

10
• Find out how long a journey is going to take before you start.
• Check the route of a journey you are planning.
• Check a route for someone who is coming to visit you, so that you can explain the route to them.
To plan a route in advance, follow these steps:
1. Tap the screen to bring up the main menu.
2. Tap the arrow button to move to the next menu screen and tap  Prepare 
route .
3. Select the starting point for your journey in the same way that you would  select your destination.
4. Set the...