TomTom Navigation Manual

TomTom navigation 
module 

What’s in the box1.
2
What’s 
in the 
box• TomTom navigation module
• Car dock
•USB cable
•MyTomTom leaflet 

Read me first2.
3
Read 
me firstCar dock
Push your TomTom navigation module into the car dock in your car. To remove your nav-
igation module from the car dock, press the release button on the car dock. Your dealer 
can install the car dock and connect it to the Sony XNV.
The display of the Sony XNV is also used as the navigation module display. Use the Sony 
XNV touch screen to operate your navigation module.
Switching on and off
The TomTom navigation module switches on simultaneously with the Sony XNV....

4
Tip: We recommend using a broadband internet connection whenever you connect your 
navigation device to MyTomTom.
Setting up MyTomTom
To set up MyTomTom, do the following:
1. Connect your computer to the internet.
2. Start a browser and go to tomtom.com/getstarted. 
3. Click Download now.
Your browser downloads the MyTomTom support application, which you need to 
install on your computer in order to connect your device to MyTomTom. Follow the 
instructions on the screen if you are asked questions while...

5
Charging your TomTom navigation module
The LED on the navigation module is red while the battery is charging, and is green when 
it is fully charged.
Important: You should plug the USB connector directly into a USB port on your computer 
and not into a USB hub or USB port on a keyboard or monitor.
Safety Notice
Your TomTom navigation module contains a GSM/GPRS module which can interfere with 
electrical devices such as cardiac pacemakers, hearing aids and aviation equipment.
Interference with these...

Safety3.
6
SafetySafety settings
We recommend using the safety settings to make your driving as safe as pos-
sible.
These are some of the options included in the safety settings:
• Show essential menu buttons while driving
• Show safety reminders
• Warn when driving faster than allowed 

Planning a route4.
7
Plan-
ning a 
routeImportant: In the interest of safety and to reduce distractions while you are driving, you 
should always plan a route before you start driving.
To plan a route on your TomTom navigation module, do the following:
1. Tap the screen to open the Main menu.
2. Tap Navigate to...
3. Tap Address.
Tip: The first time you plan a route, you are asked to select a country, state or region. Your 
selection is saved and used for all future routes until you change this setting....

8
• When the correct streetname appears in the list, tap the name to select the destina-
tion.
6. Enter the house number, then tap Done.
7. The location is shown on the map. Tap Select to continue or tap Back to enter another 
address.
Tip: If you want your final destination to be a car park, tap Car park and select a location 
from the list of car parks close to your general destination.
8. Select the type of route you want to plan. 

9
9. When the new route is shown, tap Done.
• For more information about the route, tap Details.
• To plan a different route, tap Change route.
Your TomTom navigation module starts to guide you to your destination, using spoken 
instructions and onscreen directions.
Route summary
The route summary shows an overview of your route, the remaining distance to your des-
tination and the remaining estimated journey time.
To view the route summary, tap the right-hand panel on the status bar in the Driving view...

10
The LIVE tab panels show the following information:
•Traffic on route - tap this panel to view detailed information about traffic delays and 
other incidents on your route.
•Speed cameras - tap this panel to open the Speed Camera menu. You can then report 
a speed camera or change your settings for speed camera warnings.
•Weather - tap this panel to view the latest weather reports.
Note: Not all LIVE services are available in all countries. You may be able to use LIVE serv-
ices when travelling...