TomTom Go 50 Manual

91 
 
 
 
2. Select Report Speed Camera. 
 
You see a message thanking you for adding the camera. 
Tip: If you make a mistake when reporting a camera, select Cancel in the message. 
The speed camera is saved on your GO automatically and also sent to other users.  
Confirm or remove a mobile speed camera 
You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no 
longer present. 
1. Just after you pass a mobile speed camera, in the route bar you are asked if the...

92 
 
 
 
About danger zones and risk zones 
The Danger Zones service warns you about danger zones and risk zones on your route when you are 
in France. 
Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile 
speed cameras when you are driving in France. To be compliant with this change in French law, 
speed camera locations are no longer reported but instead areas of danger are indicated as danger 
zones and risk zones. 
Important: Outside of France, you...

93 
 
 
 
Danger zone and risk zone warnings 
Warnings are given 10 seconds before you reach a danger zone or risk zone. You are warned in 
several ways: 
 A symbol is shown in the route bar and on your route on the map. 
 Your distance to the start of the zone is shown in the route bar.  
 You hear a warning sound as you get near the start of the zone. 
 While you are approaching a zone or driving in a zone, your speed is monitored. If you drive 
more than 5 km/h or 3 mph over the speed limit the...

94 
 
 
 
Reporting a risk zone 
If you pass a new temporary risk zone that you were not warned about, you can report it instantly. 
Note: To report a risk zone, you must be connected to TomTom services and logged in to your 
MyTomTom account. 
If a new temporary risk zone is reported directly before or after an existing risk or danger zone, 
then the new zone is added to the existing zone. 
If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be 
available for all...

95 
 
 
 
About My Places 
My Places provides an easy way to select a location without the need to search for the location each 
time. You can use My Places to create a collection of useful or favourite addresses. 
Tip: The terms favourite and place mean the same thing - favourites are places that you go to 
often. 
The following items are always in My Places: 
 Home - Your home location can be your home address or somewhere you often visit. This 
feature provides an easy way to navigate there. 
 Work...

96 
 
 
 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the home or work location symbol. 
 
 Select the Search button and search for a location. Select a location to set as home or work. 
Select Set home location or Set work location. 
Setting your home or work location using the map 
1. In the Map View, move the map and zoom in until you can see your home or work location. 
2. Select the location by pressing and holding the screen for...

97 
 
 
 
1. Open the pop-up menu and select Add to My Places. 
2. In the name bar, enter the name Home. 
Note: Home must have a capital letter H. 
3. Select Add. 
Your home location is changed to the new location.  
Adding a location from My Places 
1. In the Main Menu, select My Places. 
2. Select Add a new place. 
3. To select a location, do one of the following: 
 Zoom in on the map at the location you want to select. Press and hold to select the loca-
tion, then select the add location symbol. 
...

98 
 
 
 
Adding a location to My Places using search 
1. In the Main Menu, select Search. 
2. Search for a location. 
3. Select the location then select Show on map. 
4. When the map view shows the location, select the pop-up menu button. 
 
5. Select Add to My Places. 
The name of the location appears in the edit screen. 
6. Edit the name of the location so you can easily recognise it. 
7. Select Done to save your location in the My Places list.  
Adding a location to My Places by marking 
To mark a...

99 
 
 
 
Appearance 
Select Settings in the Main Menu, then select Appearance. 
 
On this screen, you can change these settings: 
 Display 
Select Display to change the appearance of the display. 
 Route bar 
Select Route bar to change the information you see in the route bar. 
 Guidance view 
Select Guidance view to change the information you see in the guidance view. 
 Automatic zoom 
Select Automatic Zoom to change how you view a junction as you drive. 
 Automatic map view switching 
By default,...

100 
 
 
 
Select Switch to night colours when dark to automatically switch to night colours when it gets 
dark. 
Size of text and buttons 
Select Size of text and buttons to change the size of the text and the buttons you see on the 
screen. 
Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen. 
Drag the slider to change the text and button size to small, medium or large, then select Apply this 
change. Your GO restarts and applies the change.  
Route Bar 
Select...