TomTom Blue And Me 2 Manual

							11 
 
 
 
Using your navigation device, you can join the MapShare Community, or report speed cameras or 
danger zones. If you choose to use either of these services, your reports, that include location 
information and your MyTomTom account name, are sent to TomTom and kept together with 
your MyTomTom account. TomTom then uses your information to improve its maps and speed 
cameras. 
If you no longer allow sharing of information, none of the above information is sent to TomTom 
and information previously stored on your device is deleted. You won’t be able to receive HD 
Traffic or mobile speed camera locations, or use any other LIVE services. 
TomTom will not give anyone else access to the information collected from your navigation de-
vice.  
In choosing to provide TomTom with information you are helping to make driving better, specifi-
cally by improving maps, traffic flows and reducing congestion. We appreciate your help. 
Note: The length or end date of your service subscription does not change if you do not allow 
sharing of information. 
This navigation device uses a GSM network that contains location information about your naviga-
tion device. By law, the network operator may be required to retain this location and other infor-
mation for law enforcement purposes and TomTom has no influence over this. If you disable in-
formation sharing the mobile network connection is not active and the network operator cannot 
store location information. 
If you think that your information is not being used for the purpose for which you have provided it 
to TomTom, contact us at tomtom.com/support. 
See our privacy policy at tomtom.com/privacy.  
Safety Notice 
Your Blue&Me-TomTom 2 device contains a GSM/GPRS module which can interfere with electrical 
devices such as cardiac pacemakers, hearing aids and aviation equipment. 
Interference with these devices may endanger the health or life of you or others. 
Do not use it near unprotected electrical units or in areas where the use of mobile telephones is 
prohibited, such as hospitals and airplanes.  
Take care of your navigation device 
Never leave your Blue&Me-TomTom 2 or accessories on view when you leave the car as they may 
become an easy target for thieves. 
It is important to take care of your device: 
 Your device is not designed for use in extreme temperatures and any such exposure may 
cause permanent damage. Extended exposure to sunlight may lead to early deterioration in 
battery performance. 
 Do not open the casing of your device under any circumstances. Doing so may be dangerous 
and will invalidate the warranty. 
 Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.   
						

							12 
 
 
 
Safety settings 
We recommend using the safety settings to make your driving as safe as possible. 
These are some of the options included in the safety settings: 
 Show essential menu buttons while driving 
 Show safety reminders 
 Warn when driving faster than allowed 
If your device supports voice commands, you can also drive more safely by using voice com-
mands to control your navigation device.  
						

							13 
 
 
 
Blue&Me-specific          
functions  
						

							14 
 
 
 
Steering wheel controls 
You can control most of the functions on your Blue&Me-TomTom 2 navigation device using the 
buttons on the car steering wheel. To do this, press MAIN/MENU, then use the arrow keys to 
highlight Satnav, then press SRC/OK. 
Press one of these buttons to open selected items in the menu or to select or clear checkboxes. 
 
or 
 
 
Press this button to return to the Driving View and to stop using the steering wheel buttons to 
control the navigation device. 
 
 
Press one of these buttons to move up or down a list or menu. 
 
Note: The remaining buttons are used for specific Blue&Me functions, for controlling the vol-
ume of the radio and incoming calls, and to activate Blue&Me voice commands. 
A message is displayed on your navigation device if you try to do something which is not sup-
ported by the steering wheel buttons. To control these functions on your device, tap the screen or 
use voice command and control. For more information, see the chapter on Voice command and 
control.  
Cluster display 
Note: Not all cars support showing navigation instructions in the cluster display. 
Navigation instructions from your Blue&Me-TomTom 2 navigation device are shown in your car’s 
cluster display. 
The display shows the next navigation instruction, the distance to next navigation instruction and 
the name of the next street. 
You can switch the navigation instructions in the cluster display on or off in the Blue&Me-TomTom 
Preferences menu, on page 2/2, with the option Show guidance on car display.  
Blue&Me controls  
						

							15 
 
 
 
Your Blue&Me-TomTom 2 navigation device and Blue&Me in your car communicate with each 
other using a Bluetooth connection. 
To pair your navigation device with Blue&Me, do the following: 
1. Turn your car key to the MAR position. 
2. Press the MAIN button on your steering wheel to open the main menu of Blue&Me in the 
cluster display of your car. 
3. Use the arrow buttons on the steering wheel to navigate to the settings menu. 
4. Select Settings and then Pairing/User Pairing. 
A 4-digit PIN code appears on the cluster display. You use this PIN in a later step. 
5. Tap the screen on your navigation device to show the Main Menu. 
 
6. Tap Find Blue&Me. 
7. Tap Yes when asked if you want to start searching for Blue&Me now. 
8. Enter the Blue&Me PIN on your navigation device. This is the PIN shown earlier in the cluster 
display of your car. 
A message confirming that the connection is successful appears both on the navigation device 
and in the cluster display. Each time the Blue&Me-TomTom 2 device is connected or discon-
nected from Blue&Me, you see a confirmation message. 
Pairing and connection  
						

							16 
 
 
 
When your navigation device and your car have been paired, the Car Menu button appears in the 
Main Menu of the navigation device.  
 
From the Car Menu, you can access the functions specific to your Blue&Me-TomTom 2. The Car 
Menu button changes depending on the model of your car, and is updated whenever you connect 
your device with a new car. 
In future, the connection is activated automatically each time the navigation device is switched on 
and either the car key is in MAR position or the car engine is running. 
In some instances, you may need to repeat the pairing procedure. Note that the PIN code will 
change every time.To connect your Blue&Me-TomTom 2 device to a different car, you need to 
carry out the complete pairing and connection procedure. 
Note: If a connection problem occurs, tap Settings on the device. Then tap Reset factory set-
tings and repeat the pairing procedure. 
   
						

							17 
 
 
 
You can synchronise some settings on your Blue&Me-TomTom 2 navigation device with your car 
settings. 
Settings that can be synchronised include language, time and units. You can also select to use a 
branded car symbol and start-up screen that matches your car. 
When you first connect your navigation device to Blue&Me, automatic synchronisation of settings 
is switched on. 
If synchronisation is switched on, this happens every time you connect your navigation device to 
Blue&Me and every time you change the car settings. 
You can control the synchronisation of individual properties in the Blue&Me Preferences menu. 
 
Synchronising your settings  
						

							18 
 
 
 
Car Menu 
Tap Car Menu in the Main Menu to access Telephone, Trip Computer, eco:Drive info (or Fuel 
efficiency info, or EcoTrend info depending on your car) and Media player. 
Tip: The car image displayed in the Car Menu button and in the buttons within the Car Menu is 
branded. It resembles the car that the navigation device is connected to.  
 
Car Menu  
						

							19 
 
 
 
The Car Menu looks as follows for different brands of car: 
 
 
  
Telephone 
You can use your Blue&Me-TomTom 2 navigation device to manage your hands-free calls. You 
should establish a Bluetooth connection between your phone and Blue&Me in your car, and not 
between your phone and the navigation device. 
You can also use Blue&Me to handle hands-free phone calls without the navigation device. How-
ever, if the navigation device is in the dock and switched on, you can access all the functions 
through the navigation device, for example, answering incoming calls and calling POIs. 
Note: For information about hands-free calling and Blue&Me in your car, see the Blue&Me user 
guide. 
  
						

							20 
 
 
 
Answering a phone call 
When someone calls you, the callers name and phone number are shown. 
Tap the buttons on the screen of your Blue&Me-TomTom 2 navigation device to accept or reject 
incoming calls. 
During a call, tap this button in the Driving View to access the Call... menu. 
 
Using this menu you can end the call, switch between calls or access the Telephone menu.  
Telephone menu 
To access the Telephone menu, do the following: 
1. Tap Car menu in the Main Menu on your navigation device. 
2. Tap Telephone. 
3. Tap Dial number to enter a phone number using the keyboard on the screen. 
You can also access the list of recently dialled numbers and the phone book. 
  
Trip Computer 
Your Blue&Me-TomTom 2 navigation device shows constantly updated information about your 
current fuel consumption and remaining driving range. The range is the distance you can travel 
with the current amount of fuel in your car. 
To see this information on your device, tap Car Menu in the Main Menu on your navigation de-
vice, then tap Trip Computer. 
Note: Part of this functionality is not available when driving using CNG and is less reliable when 
driving using LPG. 
The information about trip A and B is the same as shown in the dashboard display but shown in 
one screen. The type of information shown depends on your car. 
Note: For further information about using trip information, see the guide that was supplied with 
your car.