TomTom Bandit Action Camera Reference Guide

51 
 
 
3. On your smartphone, go to the phones Wi-Fi settings screen then select the TomTom Bandit 
Wi-Fi connection from the network list. 
4. Enter the password shown on the TomTom Bandit screen. 
Your phone connects to the TomTom Bandit. On the TomTom Bandit, the screen shows Con-
nected to device. 
5. Start the Mobile app. 
The Mobile app starts and shows the Viewfinder screen.  
About QuickGPSFix 
In the following situations, your TomTom Bandit uses QuickGPSFix to help find your position: 
 The...

52 
 
 
Remote 
The remote control can be used to start and stop recording, and to manually add highlights to your 
video. Use the remote control when you cant easily or safely reach your TomTom Bandit. 
 
You can hold the remote control in your hand, or you can attach it to a place you can easily reach. 
Note: The remote uses Bluetooth Smart to connect to your TomTom Bandit, and can only be used 
with one TomTom Bandit at a time. 
Connecting the remote control 
1. From the Camera Status screen on your...

53 
 
 
4. Select SENSORS, then move right. 
5. Select HEART then move right. 
You see ON, OFF or EXTERNAL. If the setting is set to ON or EXTERNAL you see bpm which 
means that your heart rate is measured in beats per minute.  
You then see either your heart rate shown immediately or dashes which blink to show that your 
watch is searching for the heart rate sensor.  
Tip: When the heart rate is detected, the monitor stays active for another 30 seconds in case 
you want to start an activity straight...

54 
 
 
Light 
Select LIGHT to switch the screen backlight ON or OFF.  
Tip: Switch the backlight off to save battery power. 
 
Reset 
Select RESET to choose from two reset options: 
 RESET ALL resets your TomTom Bandit to the factory settings and restarts the TomTom Bandit. 
Note: A reset does not delete your photos and videos stored on the microSD card. 
 RESET WIFI generates a new Wi-Fi name and password.  
Storage 
Using the STORAGE settings you can delete items from the microSD card and format the...

55 
 
 
About 
The About screen contains standards and legal information that is applicable to the TomTom 
Bandit.  

56 
 
 
Batt-Stick  

57 
 
 
The Batt-Stick provides power for your TomTom Bandit and storage space for all your videos and 
photos. When the Batt-Stick is inserted into the TomTom Bandit and locked, it forms a waterproof 
seal. 
The Batt-Stick contains TomTom Bandit battery and holds the microSD card. The USB connector is 
used to charge the Batt-Stick and to transfer files to a computer. There is also an external 
connector for an optional power cable. 
Important: If you remove the Batt-Stick or lens cover be extra careful...

58 
 
 
You must remove the Batt-Stick to insert a memory card or to use a different Batt-Stick. You can 
also use its USB connector to charge the Batt-Stick and transfer files to a computer. 
Important: If you remove the Batt-Stick or lens cover be extra careful not to let dirt or water enter 
the TomTom Bandit or the Batt-Stick. Only remove the Batt-Stick or lens cover in clean and dry 
conditions. 
To remove the Batt-Stick, follow these steps: 
1. Press the release lever of the Batt-Stick. 
 
2. While...

59 
 
 
3. Pull the Batt-Stick out. 
 
  

60 
 
 
Inserting the Batt-stick 
Important: If you remove the Batt-Stick or lens cover be extra careful not to let dirt or water enter 
the TomTom Bandit or the Batt-Stick. Only remove the Batt-Stick or lens cover in clean and dry 
conditions. 
To insert the Batt-Stick, follow these steps: 
1. Insert the Batt-Stick into the camera. 
 
2. Make sure the two dots align and are close together. 
Important: If you see only one dot when the Batt-Stick is inserted do not try to turn it. You 
must first put the...