Technics Stereo Integrated Amplifier Su C700 Owners Manual

Owner’s Manual
Stereo Integrated Amplifier
SU-C700
SU-C700-SQT0489_PP_mst.book  1 ページ  ２０１５年１月７日　水曜日　午前１０時３２分 

SU-C700-SQT0489_PP_mst.book  2 ページ  ２０１５年１月７日　水曜日　午前１０時３２分 

Music is borderless and timeless,
touching people’s hearts across cultures and generations.
Each day the discovery of a truly emotive experience
from an unencountered sound awaits.
Let us take you on your journey to rediscover music.
SU-C700-SQT0489_PP_mst.book  3 ページ  ２０１５年１月７日　水曜日　午前１０時３２分 

4
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, visit:
U.S.A.: www.panasonic.com/support
Canada: www.panasonic.ca/english/support
Register online at www.panasonic.com/register
 (U.S. customers only)
∫ Features of this unit
This unit offers the following features:
Full-digital amplifier with a high-precision jitter reduction c ircuit and PWM conversion circuit
This unit is a...

5
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the 
safety instructions on the unit and the applicable safety instr uctions listed 
below. Keep these operating instructions handy for future refer ence.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance w ith the...

6
Table of contents
Accessories
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the unit.
	
≥Product numbers provided in this Owner’s Manual are correct as  of December 2014. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
Unit care
Pull out the AC power supply cord from the outlet before mainte nance. Clean this unit with a soft cloth.≥When dirt is heavy, wring a wet cloth tightly to wipe the dirt,  and then wipe it...

7
Control reference guide
∫Front
1 Power switch lever
Turn on/off this unit.
≥The remote control do not operate when the power switch 
lever is in the lowered position.
2 Headphones jack
For connecting a headphone plug.
≥When a plug is connected, the speakers do not output sound.
≥ Excessive sound pressure from earphones and headphones 
can cause hearing loss.
≥ Listening at full volume for long periods may damage the 
user’s ears.
3 LAPC indicator ( >13)
The indicator lights up when amplifier output...

8∫
Buttons that work for this unit
1 [AMP Í]: Standby/on switch
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power.
≥ The remote control do not operate when the power switch 
lever is in the lowered position.
2 [AMP]/[NWP]/[CD]: Select the device to be operated
3 [NINPUT O]: Select the input source ( >13)
4 [DIMMER]: Adjust the brightness of the light and the 
indicators
Each press of this button switches the brightness....

9
Getting started
≥Turn off all equipment before connection and read the appropria te operating instructions.
≥ Do not connect the AC power supply cord until all other connect ions are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.
1Turn the knobs to loosen them, and insert the core wires into the holes.
2Tighten the knobs.
	
≥ When the connections are completed, pull the speaker cables lig htly to check that they are connected firmly.
≥...

10
≥You can input digital audio signals to this unit and play back music.
≥ You can automatically link this unit with the ST-C700/SL-C700 a nd operate them easily with the remote control. (>14)
	
≥Use the system connection cables and the coaxial digital cables supplied with the ST-C700/SL-C700.
≥ Connect the system connection cables to the system terminals [C ONTROL1]/[CONTROL2].
Connect the ST-C700 to [CONTROL1] and the SL-C700 to [CONTROL2] .
≥ Connect coaxial digital cables to the digital audio input...