Technics Network Audio Player St C700 Owners Manual

							21
Others
The sleep timer can switch the unit to standby mode after a 
set time.
1Press [NWP].
2Press [MENU].
3Press [3,4 ] repeatedly to select “SLEEP” 
and then press [OK].
4Press [ 3,4 ] to set the time (in minutes) and 
then press [OK].
“30 minutes”  ,-. “60 minutes”  ,-. “90 minutes”  ,-. “120 minutes”
^""""""""""""". “Off” !"""""""""""""J 
This unit is designed to conserve its power consumption and 
save energy. The unit will turn to standby mode automatically 
if there is no sound and it is not being used for approximately  
20 minutes.
≥ The factory default is “On”.
To cancel this function
1Press [NWP].
2Press [HOME].
3Press [ 3,4 ] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4 ] repeatedly to select 
“AUTO OFF” and then press [OK].
5Press [ 3,4 ] to select “Off” and then press 
[OK].
	
≥ The auto off function works unless you turn it off, even if you turn 
off and on this unit.
≥ If “Network Standby” is set to  “On”, this function will also be  set to 
“On”. To change the setting, set “Network Standby” to “Off”. ( >21)
This unit can turn on automatically from standby mode when 
this unit is selected as the AirPlay/DLNA player.
≥The factory default is “Off”.
1Press [NWP].
2Press [HOME].
3Press [ 3,4] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4] repeatedly to select 
“Network Standby” and then press [OK].
5Press [ 3,4] to select “On” and then press 
[OK].
	
≥ If this function is set to “On” the standby power consumption w ill 
increase.
Select English or French for the display.≥ The factory default is “English”.
1Press [NWP].
2Press [HOME].
3Press [ 3,4] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4] repeatedly to select 
“Language” and then press [OK].
5Press [ 3,4] to select “English”/“Français” 
and then press [OK].
Sleep timer
Auto off function
Network standby
Language
ST-C700-SQT0495_PP_mst.book  21 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							22
Occasionally, Panasonic may release updated firmware for 
this unit that may add or improve the way a feature operates. 
These updates are available free of charge.
Preparation
≥Connect this unit to the network. ( >12)
– Make sure that the network is connected to the Internet.
1Press [NWP].
2Press [HOME].
3Press [ 3,4] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4] repeatedly to select “F/W 
Update” and then press [OK].
5Press [ 3,4 ] to select “Yes” and then press 
[OK].
≥ When the update has finished successfully, “Success” is 
displayed.
6Disconnect the AC power supply cord and 
reconnect it after 3 minutes.
	
≥ If there are no updates, “No Need” is displayed after step 5.
≥ Downloading will require several minutes. It may take longer or  
may not work properly depending on the connection environment.
∫ Checking the firmware version
1 Press [NWP].
2 Press [HOME].
3 Press [ 3,4] repeatedly to select “SETUP” and then 
press [OK].
4 Press [ 3,4] repeatedly to select “F/W Version” and 
then press [OK].
≥ Press [OK] to exit.
When other equipment responds to the supplied remote 
control, change the remote control code.
≥The factory default is “Mode 1”.
Point the remote control at this unit, and press 
and hold [OK] and the numeric button for at least 
4 seconds.
≥When the remote control code is changed, the new code 
will appear on the display for a few seconds.
	≥ When the SU-C700/SL-C700 is connected via the system control 
function, change its remote control code as well as the remote 
control code for this unit.
You can change the character encoding of track names, 
artist names and other information when they are not 
displayed as they should be.
≥The factory default is “Type 1( 日本)”.
1Press [NWP].
2Press [HOME].
3Press [ 3,4 ] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4 ] repeatedly to select “E Asian 
Character” and then press [OK].
5Press [ 3,4 ] to select 
“Type 1( 日本)”/“Type 2( 简体字)” and then 
press [OK].
Firmware updates
Do not disconnect the AC power supply cord or lower 
the power switch lever to the [OFF] position while one 
of the following messages is displayed.
“Linking” or “Updating”
≥ During the update process, no other operations can be 
performed.
Remote control code
[OK] + [1] Set the code to “Mode 1”
[OK] + [2]Set the code to “Mode 2”
Changing the character 
encoding
Ty p e   1 (日本) Priority is given to Japanese.
Ty p e   2 (
简体字)Priority is given to Chinese 
(Simplified).
ST-C700-SQT0495_PP_mst.book  22 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							23
You can automatically link this unit with the SU-C700 and 
operate them easily with the remote control.
Preparation
1Connect this unit and the SU-C700 with a system 
connection cable and a coaxial digital cable. (> 9)
2 Set the power switch lever of this unit and the SU-C700 
to the [ Í/I] position.
∫Switching this unit and the SU-C700 to 
on/standby simultaneously
≥If you point the remote control at this unit and press 
[NWP Í] when this unit and the SU-C700 are in standby 
mode, this unit and the SU-C700 will be turned on 
simultaneously.
≥ When both this unit and the SU-C700 are turned on and 
the input source of the SU-C700 is set to “COAX1”, you 
can set them to automatically enter standby mode using 
the sleep-timer. ( >21)
∫Switching the SU-C700’s input source 
automatically
When you perform an operation such as playback on this 
unit, the input source of the SU-C700 will be automatically 
switched to “COAX1”.
∫Adjusting Bass/Middle/Treble
You can adjust the tone of the SU-C700 with this unit. Each 
tonal range (Bass/Middle/Treble) can be adjusted.
1 Press [NWP].
2 Press [HOME].
3 Press [ 3,4] repeatedly to select “SETUP” and then 
press [OK].
4 Press [ 3,4] repeatedly to select “Tone Control” and 
then press [OK].
5 Press [ 3,4] to select “On (adjustment)” and then press 
[OK].
6 Press [ 3,4] to select “BASS” (Bass), “MID” (Middle) or 
“TREBLE” (Treble).
7 Press [ 2,1] to adjust the level and then press [OK].
≥ Each level can be adjusted between “ s10” and “r10”.
	
≥ For information on the operations of the SU-C700, please also 
refer to its operating instructions.
Troubleshooting
Before requesting service, make the following checks. If you 
are uncertain about some of the check points, or if the 
solutions indicated in the following guide does not resolve 
the issue, then consult your dealer for instructions.
Heat buildup of this unit.
≥This unit becomes warm when used for a long time. This is 
not a malfunction.
Do you have the latest firmware installed?
≥Panasonic is constantly improving the unit’s firmware to 
ensure that our customers are enjoying the latest 
technology. ( >22)
A “humming” sound can be heard during 
playback.
≥An AC power supply cord or fluorescent light is near the 
cables. Keep other appliances and cords away from the 
cables of this unit.
No sound.
≥Check the volume of the connected device (amplifier, etc.).
≥ Check to see if the cable connections to the input and 
output terminals are incorrect. If this is the case, turn off 
this unit and reconnect the cables correctly.
≥ Check to see if the correct input source is selected.
≥ Insert the plugs of the cables to be connected all the way 
in.
≥ When “Digital Output” and “Analog Output” are set to “Off”, 
no sound will be output. Change the setting of the output 
terminal to be used to “On”. ( >20)
≥ Playback of multi-channel content is not supported.
Using the system control 
function
To return all settings to the factory defaults
When the following situations occur, reset the memory:
≥ There is no response when buttons are pressed.
≥ You want to clear and reset the memory contents.
1 Press [NWP].
2 Press [HOME].
3 Press [ 3,4] repeatedly to select “SETUP” and then 
press [OK].
4 Press [ 3,4] repeatedly to select “Initialization” and 
then press [OK].
5 Press [ 3,4] to select “Yes” and then press [OK].
6 Press [ 3,4] to select “Yes” and then press [OK] 
again.
General
ST-C700-SQT0495_PP_mst.book  23 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							24
The sound is interrupted.
≥Depending on your environment, the audio may be 
interrupted during playback. Check the operating 
instructions of the connected device and the connection to 
the device.
Playback does not start.
≥Depending on your environment or connected devices, it 
may take some time.
The system control function is not working.
≥Connect the system connection cable to the system 
terminal [CONTROL1] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input 
terminal [COAX1 IN] of the SU-C700.
The unit turns off automatically.
≥Is the auto off function turned on? ( >21)
≥ If the SU-C700 is connected to this unit via the system 
control function, this unit may automatically enter standby 
mode when the SU-C700 enters standby mode. ( >9, 23)
Cannot connect to the network.
≥Confirm the network connection and settings. ( >12)
Cannot connect to the unit.
≥Make sure that the multicast function on the wireless router 
is enabled.
≥ Make sure that the device and the unit are connected to 
the same network. ( >12)
≥ Reconnect the compatible device to the network and then 
connect to this unit again.
≥ Set “Network Standby” to “Off” ( >21), turn this unit off and 
on, and then connect to this unit again.
Playback does not start.
The sound is interrupted.
≥ Simultaneous use with other 2.4 GHz devices, such as 
microwaves, cordless telephones, etc., may result in 
connection interruptions.
Increase the distance between the wireless router and 
these devices.
≥ If several wireless devices are simultaneously using the 
same wireless network as this u nit, try turning off the other 
devices or reducing their wireless network usage.
≥ If the playback stops, check the playback status on the 
device.
Cannot operate.
≥Select “USB” as the input source.
≥ Check that the iPhone/iPad/iPod is connected properly.
≥ Connect the iPhone/iPad/iPod again or try to restart the 
iPhone/iPad/iPod.
≥ The battery of the iPhone/iPad/iPod is depleted. Charge 
the iPhone/iPad/iPod, and then operate again.
iPhone/iPad/iPod does not charge.
≥Make sure the unit is turned on when you start charging.– When charging an iPhone/iPad/iPod whose battery is depleted, 
do not turn this unit to standby mode until the iPhone/iPad/iPo d 
becomes operational.
The USB drive or its contents cannot be read.
≥ The USB drive format or its contents is/are not compatible 
with the unit. ( >29)
No response when [ 1/;] is pressed.
≥Disconnect the USB device and then reconnect it. 
Alternatively, turn the unit off and on again.
Slow operation of the USB flash drive.
≥Large file size or high memory USB flash drive takes longer 
time to read.
The PC does not recognize this unit.
≥Check your operating environment. ( >17)
≥ Restart the PC, turn off and on this unit, and then 
reconnect the USB cable.
≥ Use another USB port of the connected PC.
≥ Install the dedicated driver if using a PC with Windows.
Cannot find music files stored on the PC.
≥When you play back music files over a network, those that 
are not registered to its network server are not displayed. 
For details, refer to the operating instructions for your 
server.
AirPlay/DLNA
iPhone/iPad/iPod
USB
PC
ST-C700-SQT0495_PP_mst.book  24 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							25
Pairing cannot be completed.
≥Check the Bluetooth® device condition.
The device cannot be connected.
≥The pairing of the device was unsuccessful or the 
registration has been replaced. Try re-pairing the device.
≥ This unit might be connected to a different device. 
Disconnect the other device and try re-pairing the device.
The device is connected, but audio cannot be 
heard through this unit.
≥For some built-in Bluetooth® devices, you have to set the 
audio output to “ST-C700” manually. Read the operating 
instructions for the device for details.
NFC is not working.
≥ Make sure the NFC feature of the device are turned on.
≥ When you try again, change the angle at which the 
Bluetooth
® device touches the NFC touch area.
≥ Turn on the NFC feature of this unit when you connect a 
device using NFC. ( >18)
The remote control does not work properly.
≥To avoid interference, please do not put any objects in front 
of signal sensor. ( >7)
≥ Change the remote control code if other products react to 
this remote control. ( >22)
≥ If the SU-C700/SL-C700 is selected for the device to be 
operated, press [NWP] and retry the operation. ( >8)
Pressing [DIMMER] changes the display, the light 
and the indicator brightness  of the SU-C700/SL-
C700.
≥ [DIMMER] works for the SU-C700/SL-C700 as well as this 
unit. Turn off the device that you want to maintain the 
brightness level of, and press [DIMMER]. The following messages or service numbers may appear 
on the unit’s display.
“AUTO OFF”
≥
The unit has been left unused for about 20 minutes and will 
enter standby mode within a minute. Press any button to 
cancel it.
“Checking Connection”
≥The unit is checking the connected iPhone/iPad/iPod or a 
USB device.
“Download Error”
≥The firmware download has failed. Press any button to exit. 
Please try again later.
≥ The server cannot be found. Press any button to exit. Make 
sure that the network is connected to the Internet.
“Empty”
≥The selected folder is empty. Move tracks into the folder 
and retry the operation.
≥ The server is not found on the network. Check to see if the 
server is connected to the same network as this unit, and 
retry the connection to this unit. ( >13)
“Error”
≥Incorrect operation is performed. Read the instructions and 
try again.
“F  ” (“   ” stands for a number.)
≥ There is a problem with this unit.– Is the volume extremely high?
If so, lower the volume.
– Is this unit placed in an extremely hot place? If so, move this unit to a cooler place and wait a few moments 
and then try to turn it on again.
If the problem persists, write down the displayed number, 
disconnect the AC power supply cord and consult your 
dealer.
“No Network Connection”
≥This unit is not connected to the network.
Check the network connection. ( >12)
Bluetooth®
Remote control
Messages
ST-C700-SQT0495_PP_mst.book  25 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							26
“Not Conditional”
≥The function you have tried to use is not available with the 
current settings. Check the steps and settings.
“PGM Full”
≥The number of programed tracks is more than 24.
“Please Wait”
≥This is displayed, for example, when this unit is turned 
on/off. (For up to 1 minute and 30 seconds)
“Remote ” (“   ” stands for a number.)
≥ The remote control and this unit are using different codes. 
Change the code on the remote control.
– When “Remote 1” is displayed, press and hold [OK] and [1] for 
at least 4 seconds.
– When “Remote 2” is displayed, press and hold [OK] and [2] for  at least 4 seconds.
“Searching”
≥The unit is checking the DLNA server on the network.
“Unlocked”
≥“PC” is selected, but a PC is not connected. Check the 
connection with the PC. ( >17)
≥ Audio signals, such as sampling frequency components, 
are not input correctly.
– About supported format, refer to “File format” ( >29)
“USB Over Current Error”
≥The iPhone/iPad/iPod or USB device is drawing too much 
power. Disconnect the iPhone/iPad/iPod or USB device 
and turn the unit off and on again.
“Hub Device Not Supported”
“Unrecognizable Device”
“Unsupported”
“Unsupported USB Device”
≥You have connected an iPhone/iPad/iPod or USB device 
that is not supported.
– If the iPhone/iPad/iPod is compatible, turn it on and connect  it 
correctly.
≥ The format of the file on the iPhone/iPad/iPod or USB 
device is not supported.
– About supported format, refer to “File format” ( >29)
Unit care
Pull out the AC power supply cord from the outlet before 
maintenance. Clean this unit with a soft cloth.
≥When dirt is heavy, wring a wet cloth tightly to wipe the dirt,  and 
then wipe it with a soft cloth.
≥ Do not use solvents including benzine, thinner, alcohol, kitche n 
detergent, a chemical wiper, etc. This might cause the exterior  
case to be deformed or the coating to come off.
ST-C700-SQT0495_PP_mst.book  26 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							27
Specifications
∫GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 26 W
Power consumption in standby mode*
1
(When “Network Standby” is off) Approx. 0.2 W
(When “Network Standby” is on) Approx. 4 W
Power consumption in off mode Approx. 0.2 W
Dimensions (Wk Hk D) 340 mm k78 mm k295 mm (13
3/8qk 31/16qk 115/8q)
Mass (Weight) Approx. 4.0 kg (8.8 lbs)
Operating temperature range 0oC to r 40oC ( r32 oF to  r104 oF)
Operating humidity range 35 % to 80 % RH (no condensation)
∫TERMINALS SECTION
Analog output
LINE OUT Pin jack
Digital output Optical digital output Optical terminal
Coaxial digital output Pin jack
System port
System control ‰3.5 mm (
1/8q) jack
USB
Front USB Type A connector
Support memory capacity 2TB (max)
Maximum number of folders (albums)  800
Maximum number of files (songs)  8000
File system FAT16, FAT32
USB port power DC OUT 5 V 2.1 A (max)
PC Rear USB Type B connector
Ethernet interface LAN 10 Base-T/100 Base-TX
∫FORMAT SECTION
USB-A
USB Standard USB 2.0 high-speed
USB Mass Storage class
USB-B USB Standard USB 2.0 high-speed
USB Audio Class specification USB Audio Class 2.0, Asynchronous  mode
DSD control mode ASIO Native mode, DoP mode
DSD64/DSD128 playback
ST-C700-SQT0495_PP_mst.book  27 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							28
	
≥Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
*1 When the iPhone/iPad/iPod is not charging
*2 Prospective communication distance Measurement environment: Temperature 25 oC (77 oF) / Height 1.0 m (3.3 ft)
Measure in “Mode 1”
∫ ANALOG OUTPUT SECTION
Channel 2ch
Output level LINE OUT 2.0 Vrms
Frequency response 2Hz to 90kHz (s3dB)
THD+N 0.0012 % (1 kHz, 0 dB)
S/N 112 dB (IHF-A)
Dynamic range 112 dB (IHF-A)
∫BLUETOOTH®/NFC SECTION
Bluetooth®
Bluetooth® system specification Bluetooth® Ver.3.0
Wireless equipment classification Class 2 (2.5 mW)
Supported profiles A2DP/AVRCP
Supported codec aptX
® Low Latency, AAC, SBC
Frequency band 2.4 GHz band FH-SS
Operating distance About 10 m (33 ft) Line of sight*
2
ST-C700-SQT0495_PP_mst.book  28 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							29
∫
File format
This unit supports the following file formats.
≥This unit does not support the playback of copy-protected music  files.
≥ Playback of all files in formats supported by this unit is not  guaranteed.
≥ Playback of a file in a format not supported by this unit may c ause choppy audio or noise. In such cases, check to see if this  unit 
supports the file format.
≥ This unit does not support VBR (Variable Bit Rate) playback.
≥ Some of the connected devices (servers) may be capable of converting files in formats not supported by this unit and output 
them. For details, refer to the operating instructions for your  server.
≥ File information (sampling frequency, etc.) shown by this unit and playback software may differ from each other.
USB-A
PC (USB-B)*
1
LAN (DLNA)*2
*1 If you download and install the dedicated app, you can play b ack files in wide-ranging formats. (>17)
For details, refer to the operating instructions of the app.
*2 Whether or not each music file can be played back over your n etwork is determined by the network server even if the format of the file is listed 
above. For example, if you are using Windows Media
® Player 11, not all music files on the PC are playable. You can  play back only those 
added to the library of Windows Media® Player 11.
File formatExtensionSampling frequencyBit rate 
Number of quantization bits
MP3 .mp3 32/44.1/48 kHz 16 kbps to 320 kbps
AAC .m4a/.aac 32/44.1/48/88.2/96 kHz 16 kbps to 320 kbps
WMA .wma 32/44.1/48 kHz 16 kbps to 320 kbps
WAV .wav 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
FLAC .flac 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
AIFF .aiff 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
ALAC .m4a 32/44.1/48/88.2/96 kHz 16/24 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
File formatExtensionSampling frequencyBit rate 
Number of quantization bits
LPCM 32/44.1/48/88.2/96/176.4/192 kHz 16/24/32 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
File formatExtensionSampling frequencyBit rate 
Number of quantization bits
MP3 .mp3 32/44.1/48 kHz 16 kbps to 320 kbps
AAC .m4a/.aac 32/44.1/48/88.2/96 kHz 16 kbps to 320 kbps
WMA .wma 32/44.1/48 kHz 16 kbps to 320 kbps
WAV .wav 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
FLAC .flac 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
AIFF .aiff 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
ALAC .m4a 32/44.1/48/88.2/96 kHz 16/24 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
ST-C700-SQT0495_PP_mst.book  29 ページ  ２０１５年１月７日　水曜日　午前１０時３６分 
						

							30∫
About Bluetooth
®
Frequency band used
≥This system uses the 2.4 GHz frequency band.
Certification of this device
≥ This system conforms to frequency restrictions and has 
received certification based on frequency laws. Thus, a 
wireless permit is not necessary.
≥ The actions below are punishable by law in some 
countries:
– Taking apart or modifying the system.
– Removing specification indications.
Restrictions of use
≥Wireless transmission and/or usage with all Bluetooth® 
equipped devices is not guaranteed.
≥ All devices must conform to standards set by Bluetooth 
SIG, Inc.
≥ Depending on the specifications and settings of a device, it 
can fail to connect or some operations can be different.
≥ This system supports Bluetooth
® security features. But 
depending on the operating environment and/or settings, 
this security is possibly not sufficient. Transmit data 
wirelessly to this system with caution.
≥ This system cannot transmit data to a Bluetooth
® device.
Range of use
≥ Use this device at a maximum range of 10 m (33 ft). The 
range can decrease depending on the environment, 
obstacles or interference.
Interference from other devices
≥
This system may not function properly and troubles such as 
noise and sound jumps may arise due to radio wave 
interference if this system is located too close to other 
Bluetooth
® devices or the devices that use the 2.4 GHz band.
≥ This system may not function properly if radio waves from 
a nearby broadcasting station, etc. is too strong.
Intended usage
≥ This system is for normal, general use only.
≥ Do not use this system near an equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc).
Panasonic bears no responsibility for data and/or 
information that is compromised during a wireless 
transmission.
“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean th
at an 
electronic accessory has been designed to connect specifically  to iPod, 
iPhone, or iPad, respectively, and has been certified by the de veloper to 
meet Apple performance standards.
Apple is not responsible for the operation of this device or it s compliance 
with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, o r iPad may 
affect wireless performance.
AirPlay, iPad, iPhone, iPod, i Pod nano, and iPod touch are tradem arks of 
Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U. S. and 
other countries.
Android is a trademark of Google Inc.
aptX® software is copyright CSR plc or its group companies. All righ ts 
reserved.
The aptX
® mark and the aptX logo are trademarks of CSR plc or one of its  
group companies and may be registered in one or more jurisdicti ons.
The Bluetooth® word mark and logos are registered trademarks owned by 
the Bluetooth SIG, Inc. and any use of such marks by Panasonic 
Corporation is under license.
Other trademarks and trade names are those of their respective  owners.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service 
marks, or certification marks of the Digital Living Network Alliance.
“Direct Stream Digital”, DSD and their logos are trademarks of  Sony 
Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer I IS and 
Thomson.
Windows and Windows Vista are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or  other 
countries.
Windows Media and the Windows logo are trademarks or registered  
trademarks of Microsoft Corporation in the United States and/or  other 
countries.
This product is protected by certain intellectual property righ ts of Microsoft 
Corporation and third parties. Use or distribution of such tech nology outside 
of this product is prohibited without a license from Microsoft  or an 
authorized Microsoft subsidiary and third parties.
FLAC Decoder
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2 008, 
2009 Josh Coalson
Redistribution and use in source and binary forms, with or with out 
modification, are permitted provided that the following conditi ons are met:
– Redistributions of source code must retain the above copyright  notice, 
this list of conditions and the following disclaimer.
– Redistributions in binary form must reproduce the above copyri ght 
notice, this list of conditions and the following disclaimer in  the 
documentation and/or other materials provided with the distribu tion.
– Neither the name of the Xiph.org Foundation nor the names of i ts 
contributors may be used to endorse or promote products derived  f rom  
this software without specifi c prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABI LITY AND FITNESS FOR A 
PARTICULAR PURPOSE  ARE DISCLAIMED. IN NO EVENT SHALL THE 
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUP TION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ST-C700-SQT0495_PP_mst.book  30 ページ  ２０１５年１月７日　水曜日　午前１０時３６分