Technics Keyboard Sx Kn2400 Owers Manual

Part XIII MIDI
181QQTG0692
MIDI
Control Messages
Enable or disable the exchange of various control data.
1.On the MIDI MENU display, select CONTROL
MESSAGES.
The display looks similar to the following.
The CONTROL MESSAGES display consists
of 3 pages. Use the PAGE buttons to switch
between pages.
2.Use the MESSAGE 
 and  buttons to select
the control message.
3.Use the ON and OFF ∧ and ∨ buttons to spec-
ify on or off for the control message.
ON: 
Data for the control operation is exchanged.
OFF:...

Part XIII MIDI
182QQTG0692
MIDI
Common Setting
Set the functions which are common to all parts.
1.On the MIDI MENU display, select COMMON
SETTING.
• The display looks similar to the following.
2.Use 
 and  buttons to select the item.
NOTE ONLY: 
Of the performance data, specify whether or
not only note data is exchanged.
PROGRAM CHANGE TO P. MEM: 
Enable or disable the exchange of program
change numbers for the RIGHT 1 part by
operation of the PANEL MEMORY buttons.
 For this setting, the PANEL MEMORY 1...

Part XIII MIDI
183QQTG0692
MIDI
Mode Setting
Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.
1.On the MIDI MENU display, select MODE
SETTING.
The display looks similar to the following.2.Select the mode.
There are two modes for GM LEVEL 2
depending on the parts to use.
The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
Input/output Setting
Make the settings which determine how various performance data...

Part XIII MIDI
184QQTG0692
MIDI
DRUM PATTERN OUTPUT
ON: Data from the DRUMS part is transmitted.
OFF: Data from the DRUMS part is not trans-
mitted.
AUTO PLAY CHORD OUTPUT
ON: The data for the ACCOMP and BASS
parts is transmitted.
OFF: The data for the above parts is not trans-
mitted.
MIDI channels should be assigned to the
above parts before exchanging data.
AUTO OCTAVE SHIFT OUTPUT
ON: If the octave has been automatically
changed, the data of the transposed notes
is transmitted, depending on the...

Part XIII MIDI
185QQTG0692
MIDI




 
Storing user settings
After you change the MIDI settings, you can
store your customized settings in USER.
1.Adjust the various MIDI settings.
2.Go to PAGE 4/4 of the MIDI PRESETS dis-
play.
The display looks similar to the following.
3.Use the WITH SPLIT POINT? button to spec-
ify whether or not to also store the keyboard
split point (YES/NO).
4.Press the WRITE button.




 
Recalling the USER settings
1.Go to PAGE 3/4 of the MIDI PRESETS dis-
play.
2.Press the OK...

186QQTG0692
Initialize
This Keyboard has many settable functions and storable memories. However, you can return the settings
and memory to the factory-preset status.
INITIAL
1.Press the PROGRAM MENUS button to turn it
on.
• The display changes to the following.
2.Select CONTROL.
 The display looks similar to the following.
3.Select INITIAL.
 This display changes to the following.
4.Use the 
 and  buttons to select the desired
type of initialization.
 PERFORMANCE includes all the items which
are...

187QQTG0692
About the performance data
The BACK UP data will not be erased even with the passage of time.
The backup memory does not function for the stored contents until the power has been on for about 10
minutes.
If you wish to retain the settings and stored memory contents for recall at a later time, store the desired
data on a disk/SD card.
Data from previous Technics models may be limited to PERFORMANCE data.
Separately sold options
PERFOR-
MANCECURRENT PANEL settings
PANEL MEMORY
SEQUENCER...

188QQTG0692
Terminals
Back panel terminals
USB
This terminal allows connection to a personal
computer with a USB cable (commercially avail-
able type AB cable).
Used with the applications on the included CD-
ROM, you can record this instrument’s audio
sound or manage the instrument data with your
PC.
Applications
Audio Recorder:
Application for Recording this instrument’s
sounds and for saving recorded digital audio
files in WAV, WMA (Windows Audio Format)
and MP3 formats.
Song Manager:
Application for...

189QQTG0692
Symptoms which appear to be signs of
trouble
The following changes in performance may occur in the Technics Keyboard but do not indicate trouble.
Phenomenon Remedy
The buttons, keys, etc. malfunction.Turn off the POWER button once, then turn it on again.
If this procedure is not successful, turn off the POWER
button once. Then, while pressing the three lower left
buttons in the RHYTHM GROUP section (JAZZ &
SWING, BALLROOM & SHOW and LATIN &
WORLD) at the same time, turn the POWER button on...

190QQTG0692
Storage is not possible.The remaining memory capacity of the COMPOSER is
0.
Setting the time signature is not possible.The time signature cannot be changed for a pattern
which is currently recorded in the COMPOSER. If you
wish to change the time signature, first follow the pro-
cedure to clear the memory. (Refer to page 107.)
The playback timing of the rhythm pattern is dif-
ferent from the timing with which it was recorded.The QUANTIZE function was on when the pattern was
recorded and the...