Technics DJ Mixer Sh Mz1200 Operating Instructions

Operating Instructions
  Model No.    SH-MZ1200
RQT7230-3Y
DJ Mixer
PP
Before connecting, operating or adjusting this product, please read the
instructions completely.
Please keep this manual for future reference.
This manual was printed with soy based ink.
The photograph shows the silver model. 

RQT7230
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Table of contents
Supplied accessories................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ....................................... 3
Product service ............................................................................. 4
Main...

RQT7230
3
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s...

RQT7230
4
Main featuresListening caution
Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time
to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without annoying
blaring or...

RQT7230
5
Component part names
Input switch for adjusting left and right input
individually (L/R SPLIT) ...................................
,
Input switch (CH1-CH4) ..........................................
CD/LINE DIGITAL: Line or CD input, Digital input
LINE: Line input
PHONO 1-3: Turntable phono input
Input control knob (CH1-CH4) ...............................
Input level control knob (TRIM)
High-tone input control knob (HIGH)
Mid-tone input control knob (MID)
Low-tone input control knob (LOW)...

RQT7230
6
Component part names
Cross fader curve control switch
(C.FADER CURVE) ..................................................
Curve switch (CURVE)
Cross fader operation switch (CROSS FADER)
Fader operation switch (CH1-CH4 FADER) ..........
Headphone terminal (PHONES) .............................
Fader start (ON, OFF) switch (FADER START) .....
Front panelRear panel
Power button (POWER OFF ON) ...................
Turntable earth terminal (PHONO EARTH) ...........
Input terminal (CH1-CH4)...

RQT7230
7
Connections
Connect the various equipment to the DJ mixer using stereo connection cables, connection cables and appropriate cables (Each sold separately).
When connecting, make sure to turn all equipment power off.
Connection to the XLR terminals•Open the terminal cover, align the polarities on the XLR plug
(not included) and XLR terminal and insert the plug until it locks.
•To remove the XLR plug, press the knob 
 on the top of the
plug and remove it.
•After removing it, press the center of...

RQT7230
8
Input side connections
Connect the DJ mixer and various equipment with stereo connection
cables, control cables and connection cables (Each sold separately).
Connect the AC power supply cord after completing all the other
connections.
The power cord inlet for this unit (AC IN 
), is on the left side of
the rear panel. It is designed to be connected vertically.
Connect only as shown in the illustration.
Note
It is not necessary to connect a grounding wire if there is no grounding terminal or...

RQT7230
9
Mixing (Basic operations)
LRL/R SPLIT 
Press [POWER OFF ON]
The POWER lamp comes on after the power is turned on.
3Switch the input switch (CD/LINE
DIGITAL, LINE) to select the source
When you select CD/LINE DIGITAL on CH1 or CH4, input can
be analog input (CD/LINE CH1, CH4 input terminal) or digital
input (DIGITAL IN CH1, CH4 input terminal).
4Turn [TRIM], [HIGH], [MID] and [LOW]
to adjust the input signal level and
sound
TRIM:
Adjusts the input signal level.
Turn to the right for higher sound...

RQT7230
10
Using the microphone
Turn [MIC LEVEL], [HIGH] and [LOW] to
adjust volume and sound
Adjusts the microphone volume and sound connected
to MIC 1 and MIC 2 terminals.
MIC LEVEL:
Adjusts the microphone volume (Attenuation: – ∞ to 0 dB)
HIGH:
Adjusts the high tone microphone sound. Sound is flat at the center
position.
Turn to the right to increase (to approximately +12 dB at 10 kHz)
Turn to the left to decrease (to approximately –24 dB at 10 kHz)
LOW:
Adjusts the low tone microphone sound. Sound is...