Technics Digital Ensemble Sx Pr604 Owners Manual

•In this example you played chords by pressing the keys
for the “root notes” (ONE FINGER chords). But you can
also specify the chord by playing all the notes in the
chord. (Refer to page 47.)
•You can insert a fill-in pattern while the preset rhythm
pattern is playing by pressing either the FILL IN 1 or
FILL IN 2 button.
CFG7C
CFG7C
CF G7
Basic functions
21QQTG0665 

Record your performance
(SEQUENCER)
1
In the SEQUENCER section, press the
EASY REC button to turn it on.
2
Press the OK button.
•The display changes to the REALTIME
RECORD display.
DEMOSPLIT
POINTMAIN
VOLUMEAPC/SEQUENCER
VOLUMEMODECHORD FINDEROFF/ON AUTO SETTING BANK STOP8&16
BEATROCK & POP BALLAD JAZZ & SWINGMOVIE &
SHOWSOUND
ARRANGERPIANO STYLISTTEMPO / PROGRAMPROGRESSIVE
PIANISTONE TOUCH
PLAYSIMPLE PIANO FADE
IN OUT
INTRO & ENDINGSTART / STOPSYNCHRO
START
TAP TEMPOFILL IN12 112 34BEAT2
METRONOMESET...

3
Play the song on the keyboard.
4
When you have finished playing, press
the EASY REC button again to turn it
off.
•The PLAY button in the SEQUENCER section
turns on.
Playing back your recorded
performance
A
Press the SEQUENCER RESET (FILL
IN 1) button.
B
Press the START/STOP button.
•Your performance is played back just as you
recorded it.
•When you are finished playing back your
performance, press the PLAY button in the
SEQUENCER section to turn it off.
DEMOSPLIT
POINTMAIN
VOLUMEAPC/SEQUENCER...

Store your panel settings
(PANEL MEMORY)
1
Set up the desired panel settings
(sounds, volumes, etc.)
2
Use the NEXT BANK button to select
a bank (A, B, C).
•The bank names are shown on the display.
3
With the SET button held down, press
one of the numbered buttons of the
PANEL MEMORY (1 to 8).
•The current panel settings are now stored in
the specified bank and number. When you
select the same bank and number again, the
stored panel settings are recalled.
DEMOSPLIT
POINTMAIN
VOLUMEAPC/SEQUENCER...

Save data on a floppy disk
1
Insert a disk you wish to save to into
the Disk Drive slot. Push it all the way
in until you hear a click.
2
On the DISK MENU display, select
SAVE.
•If you attempt to use the SAVE procedure
when an unformatted disk is inserted into the
Disk Drive slot, the FORMAT display appears.
Follow the instructions on the display to format
the disk.  (Formatting the disk will clear any
data which is currently stored on the disk.)
3
Select TECHNICS FORMAT.
4
Specify a file number to save...

Recall data from a floppy disk
1
Press and hold the DISK button for a
few seconds.
2
Select the file you wish to load.
3
Press the LOAD button.
•The data is copied to the internal memory of
this instrument.
4
Press the PLAY button in the
SEQUENCER section to turn it on.
5
Press the START/STOP button.
•The recalled song is played back.
The following data can be saved/loaded:
•For detailed information, refer to page 94.
DEMOSPLIT
POINTMAIN
VOLUMEAPC/SEQUENCER
VOLUMEMODECHORD FINDEROFF/ON AUTO SETTING BANK...

Load rhythm data from a Technics
pattern disk 
(COMPOSER LOAD)
1
Insert a commercially sold Technics
pattern disk into the Disk Drive slot.
2
In the RHYTHM GROUP section,
press and hold the LOAD (MEMORY)
button for a few seconds.
3
Select the name of the pattern to load.
4
Press the LOAD button.
•Rhythm data is loaded to the COMPOSER
memory (MEMORY). You can use the rhythms
during your performance, just like the preset
rhythms.
DEMOSPLIT
POINTMAIN
VOLUMEAPC/SEQUENCER
VOLUMEMODECHORD FINDEROFF/ON AUTO...

Play back commercial song disks
(DIRECT PLAY)
1
Insert the song disk into the Disk Drive
slot.
2
On the DISK MENU display, select
DIRECT PLAY.
3
Use the buttons below teh display to
select a song.
•For SMF songs, use the PLAY AS button to
specify a sound arrangement mode.
4
Press the START button.
•The selected song is played back.
•DIRECT PLAY is possible from the following disks:
Standard MIDI File
Standard MIDI File with Lyrics
DISK ORCHESTRA
COLLECTION™ (DOC)
PianoDisc™
* All product and company...

Theatre Sonic (PR804)
The THEATRE SONIC feature creates a special sound field to give stereoscopic effects to the instru-
ment sound. This effect can be enhanced by adding external rear speakers.
A
Press the THEATRE SONIC button to
turn it on.
•The effect is applied.
•Even if rear speakers are not connected, a
virtual 4-channel effect is applied.
•For connection of external rear speakers, refer to page
136.
•Change the mode according to the presence of the rear
speakers (refer to page 125).
•The effect...

Remote Controller (PR804)
You can use the included wireless remote control to adjust the MAIN VOLUME, activate DIRECT
PLAY (page 98), and activate SEQUENCER playback (page 67).
•
To operate DIRECT PLAY with the remote controller, the normal playback display must be present with the disk inserted,
and for the SEQUENCER playback, the instrument must be in the stand-by mode for playing back.
Button functions
VOLUME
Adjust the total volume level.
•You can adjust the volume level within the value set by
the...