Taxan Projector KG Ps 125x User Manual
Have a look at the manual Taxan Projector KG Ps 125x User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 11 Taxan manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-30 General Operation Enlargement of the Image and Video Movement Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected so that they are not conspicuous. * Movement of the screen will not be possible when the menu screen is being displayed. This function digitally enlarges the personal computer image and video image. (1) Press the ZOOM button to enlarge the image. The zoom display appears when the ZOOM button is pressed. Each press of the button enlarges the image and each press of the button makes the image smaller (returning it to 1:1). (No enlargement) (Approximately 2 times enlargement) The image can also be moved in the following circumstances.•When “Aspect Ratio” is set to “Real” by the signal of the personal computer, and the input resolution is higher than the display resolution of the projector. •When “Aspect Ratio” is set to “Zoom” by the video signal. Zoom0Zoom21 (3) Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds. (2) Pressing the SELECT () buttons on the remote control at the time of the zoom operation will cause the display position to move. (There will not be any movement when zoom is at 0.) (Approximately 2 times enlargement) (Movement) Zoom21Zoom21 Note: After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to “0”. (3) (1) (2) VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY
E-31 General Operation Protecting the Projector with the Security Lock A password can be registered and the security lock set in order to protect the projector from unauthorized use. Registering the password The password is registered using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-34. (1) Select “Security Lock” in the “Option” menu and set it to “Enable”. The menu closes and the password registration display appears. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY(2) Register using the (four) input buttons. Be sure to input a 4-digit number. Example: Registering the password “3221” Supposing that the input buttons are substituted by number buttons, the substitution will be: FREEZE button ........................“1” MUTE button ............................“2” ECO button ..............................“3” QUICK COLOR ADJ button .....“4” (1) When input button “ECO” is pressed, an “ *” (asterisk) is entered for the first digit. Continuing, pressing the “MUTE” “MUTE” “FREEZE” input buttons will enter asterisks in the remainder of the four digits. Note: The numbers you have input are not displayed. Be sure to write down the password and store it in a safe place. Note: To cancel the number you have input, press the CANCEL button. The asterisks disappear and the display returns to the input standby mode at the first place. To cancel the password registration mode, press the CANCEL button again. The “Pass- word” display turns off. This completes password registration. The “Password” input display appears the next time the power is turned on. (2) Input the password again. An “*” appears when the input number matches. If there is a mistake, the asterisks turn off. Start over from step (1) above. If the password matches, the password registration display closes. Input buttons
E-32 General Operation If the password input display appears when the power is turned on When a password has been registered, the “Password” input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct password is input. At this time, only the POWER/STANDBY button (power off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see E-31. Register using the (four) input buttons. Be sure to input the registered 4-digit number. Example: To input the password “3221” When input button “ECO” is pressed, an “ *” (asterisk) is entered for the first digit. Continuing, pressing the “MUTE” “MUTE” “FREEZE” input buttons will enter as- terisks in the remainder of the four digits. If the password matches, the window turns off and the projector can be used normally. Canceling the password/Changing the password The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-34. Canceling the password Select “Security Lock” in the “Option” menu and set it to “Disable”. This clears the password and disables the security lock. The password input display no longer appears when the power is turned on. Changing the password After setting “Security Lock” to “Disable” as described above, set it back to “En- able”. The menu closes and the password registration display appears. Register the new password. See “Registering the password” on E-31.[Password input window]
E-33 General Operation Using the Quick Menu This function permits frequently used adjustments to be performed quickly. Note that the Quick Menu will not be displayed unless the signal of the con- nected equipment is input. Please select the input that you wish to adjust. Main unit operation (1) Press the QUICK MENU button to display the quick adjustment display. Further presses cause the adjustment display to change in sequence. Press the SELECT or button to switch to the desired adjustment dis- play. (2) Press the SELECT or button to adjust. Remote control operation (1) A press of the QUICK MENU button brings up the quick adjustment display. Further presses cause the adjustment display to change in sequence. The adjustment display can be selected with use of either the SELECT or button. (2) Press the cursor or button to make the adjustment. (3) To close the display immediately, press the CANCEL button. In the absence of operations for a period of about 10 seconds, the display will close automatically. SOURCE KEYSTONE AUTO KEYSTONEPOWER STANDBY STATUS MENU QUICK MENU (1) (2) VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY (2) (1) (3) Brightness Adjusts the brightness of the image. See page E-41. Contrast Adjusts the contrast of the image. See page E-41. Keystone Corrects (vertical) keystone distortion of the screen. See page E-47. Volume This function adjusts the volume of the built-in speaker. See page E-29. Presentation timer Sets the time of the presentation timer. See page E-50. Quick Color Adj. Select the preset color mode. See page E-43. Content of Adjustments and Settings Example: Brightness adjustment display Display Item Adjustment/Setting
E-34 Menu Operation Method • This section describes only the menu operation method. Please see this item should you need information while performing menu operations. • For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip- tions. • Adjustments and settings are made by projecting an image and adjusting to an optimum condition. • The remote control should be pointed toward the remote control sensor of the projector and operated. • To return the various items that have been changed via the menu to their standard values (i.e., default values at time of shipping from the factory), see “Factory Default” on Page E-53. (Some items will not return to their initial values.) • The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting items that can be used with the input signal are displayed on the menu. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY MENU button Used for menu display and menu closure. SELECT () buttons Used in the selection of menu names and item names as well as in setting and adjusting the item contents. CANCEL button Used to return to menu name selection as well as to close the menu (and the sub menu display). ENTER button Used to enter settings. Names and Functions of Buttons Used for Menu Operations (Remote Control) SELECT () buttons SOURCE KEYSTONE AUTO KEYSTONEPOWER STANDBY STATUS MENU QUICK MENU (Main Unit) ENTER button MENU button Used to display menus, to return to menu name selections, and to close menus (i.e., closing sub menu displays).
E-35 Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor moves to the selected menu name.Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position. Item Name This is the name of the adjustment or setting. Icon: A press of the ENTER button (the button on the main unit) will display the sub menu or the setting details. Settings Contents Item Name Sub menu Adjustment Bar Adjustment Bar and Settings Contents Adjustment Bar: The increases and decreases in bar length express the adjustment condition. Setting Contents: Displays the contents that have been set.
E-36 Menu Operation Method Performing Menu Operations • Only “Setup”, “Options” and “Info.” can be selected when no signal is being input. • The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds. • The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected from the power outlet. (Note that some items are not stored.) Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input the signal to the projector. Select the input that you wish to adjust. The menu display of the description diagram depicts an example in which the “Keystone” item name is selected. 1Press the MENU button to display the menu Menu Display The menu name that existed when the menu was closed previously will be displayed. Note: Please check that the cursor of the item name has disappeared at the time of menu name selection. Press the CANCEL button to make the cursor disappear. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY 2Press the SELECT () button to select the menu name Selection of the Menu Name Each press of the SELECT button advances the selection one step in the sequence of “Color” → “View” → “Setup” → “Option” → “Info.” → “Image”. Each press of the SELECT button causes a return of one step. The cursor moves to the selected menu name. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY
E-37 3Press the SELECT button to display the item name selection cursor. Displaying the Cursor This condition al- lows selection of the item name. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY Menu Operation Method 4Press the SELECT () button to align the cursor with the item name Selection of the Item Name VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY Items for which the Icon Is Displayed Press the ENTER button to display the submenu. Press the SELECT () button and align the cursor with the desired item name. There are also some items for which the setting display or the verification display will appear. Please see the various item descriptions. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBYSub menu 5Press the SELECT () button and make the adjustment (or setting) while viewing the image When a button is pressed, the image will also change. Making Adjustments/Settings Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to proceed in order. Setting display: The setting contents display changes with each press of the button. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY
E-38 Menu Operation Method 6Press the MENU button and close the menu display Closing the Menu VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY Selecting Another Menu Name with Remote Control Operation When a sub menu is displayed, press the CANCEL but- ton or the MENU button to close the sub menu. Press the CANCEL button or the MENU button again to delete the cursors of the various items. Press the SELECT () button and select the menu name. (Menu names cannot be selected when the item name cursor is displayed.) Note: A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while the quick menu is displayed will close the quick menu and display the menu. VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY VIDEO FREEZE MUTEECO VOL KSTN ZOOMCANCEL QUICKMENU ENTER COMPUTER QUICK COLOR ADJ ASPECT AUTO POWER/ STANDBY
E-39 List of Item Names Offering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal. *“Tint” can be adjusted only in the NTSC system composite/S signal input mode, or in the component signal input mode. Menu Operation Method [Example of Menu Display Items at the Time of Input Signal Computer Selection] Video S-Video WirelessMenu name Image Color View BrightnessE-41 Item NameSub Menu Item Name ContrastE-41 Picture Adj. Fine PictureE-41 H Position E-42 V Position E-42 E-42 ResetE-42 GammaE-43 Quick Color Adj.E-43 Color Temp.E-44 White LevelE-44 Color SpaceE-44 White Balance E-45 Aspect RatioE-46 FilterE-46 Vertical FlipE-47 Horizontal FlipE-47 KeystoneE-47 Auto KeystoneE-47 Viewer Component Computer Reference PageInput Signal Color TintE-41 Sharpness E-41 E-41 Imput Terminal COMPUTER IN