Taxan Plus Ps100s Projector User Manual

							E-60
Replacing the Lamp Cartridge
5Mount the new lamp cartridge.
(1) Slowly push in the lamp cartridge. (Align it with the screw
holes of the main unit.)
6Mount the lamp cover.
(1) Insert the edge of the lamp cover into the main unit, then
close the lamp cover.
7Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset.
Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization
verification display. Press the ENTER button again. See “Lamp Timer  Reset” on Page E-53.
Note:
After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should
this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for
more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.
Contact a store that sells the KG-PS100S/KG-PS120X/KG-PS125X for a replacement lamp. Indicate you need a KG-LPS1230 replacement
lamp for the KG-PS100S/KG-PS120X/KG-PS125X (order code 000-155).
(2) Firmly press down on the specified location, then tighten
the 2 screws of the lamp cartridge by turning them clock-
wise.
(2) Tighten the screw of the lamp cover by turning it clockwise. 
						

							E-61
Specifications
ModelKG-PS100S
Optical
Method of projection : DLP® (single DLP® chip)
DLP® chip 0.55 inches 800
600 dots
Lamp 230 W high pressure mercury lamp
Projection lens : Manual zoom (
1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm
Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet  telephoto)
Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)
Light Output Standard mode: 2500 lm
Contrast Ratio 2000:1 (Full on/off)
Electrical
Inputs Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,
576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical  50 to 85 Hz)
Color Reproduction Full color (16,770,000 colors)
Resolution VGA (640
480) expansion/true, S-VGA (800
600) true
XGA (1024
768) compression
Input Current 2.8 A
Power Requirement 100 - 240 V AC, 50/60 Hz
Power Consumption 280 watts (240 watts in eco mode)
Mechanical
Dimensions Excluding Stand 195 mm (W)
58 mm (H)
262 mm (D) (when stored, not including projecting parts)
7.7 in.(W)
2.3 in.(H)
10.3 in.(D) (when stored, not including projecting parts)
Weight Approximately 1.8 kg / 4.0 lbs
Operational Temperatures Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice. 
						

							E-62
Specifications
ModelKG-PS120X
Optical
Method of projection : DLP® (single DLP® chip)
DLP® chip 0.55 inches 1024
768 dots
Lamp 230 W high pressure mercury lamp
Projection lens : Manual zoom (
1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm
Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet  telephoto)
Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)
Light Output Standard mode: 2500 lm
Contrast Ratio 2000:1 (Full on/off)
Electrical
Inputs Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,
576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical  50 to 85 Hz)
Color Reproduction Full color (16,770,000 colors)
Resolution VGA (640
480) expansion/true, S-VGA (800
600) expansion/true
XGA (1024
768) true, S-XGA (1280
1024) compression
Input Current 2.8 A
Power Requirement 100 - 240 V AC, 50/60 Hz
Power Consumption 280 watts (240 watts in eco mode)
Mechanical
Dimensions Excluding Stand 195 mm (W)
58 mm (H)
262 mm (D) (when stored, not including projecting parts)
7.7 in.(W)
2.3 in.(H)
10.3 in.(D) (when stored, not including projecting parts)
Weight Approximately 1.8 kg / 4.0 lbs
Operational Temperatures Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice. 
						

							E-63
Specifications
ModelKG-PS125X
Optical
Method of projection : DLP® (single DLP® chip)
DLP® chip 0.55 inches 1024
768 dots
Lamp 230 W high pressure mercury lamp
Projection lens : Manual zoom (
1.15), Manual focus F = 2.45 – 2.62, f = 18.7 – 21.5 mm
Image size Minimum 31.7 inch (at projection distance of 1.20 m / 3.9 feet  telephoto)
Maximum 300 inch (at projection distance of 10.19 m / 33.43 feet wide)
Light Output Standard mode: 2500 lm
Contrast Ratio 2000:1 (Full on/off)
Electrical
Inputs Video (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/YPbPr(480p,
576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical  50 to 85 Hz)
Color Reproduction Full color (16,770,000 colors)
Resolution VGA (640
480) expansion/true, S-VGA (800
600) expansion/true
XGA (1024
768) true, S-XGA (1280
1024) compression
Input Current 3.0 A
Power Requirement 100 - 240 V AC, 50/60 Hz
Power Consumption 300 watts (260 watts in eco mode)
Mechanical
Dimensions Excluding Stand 195 mm (W)
58 mm (H)
262 mm (D) (when stored, not including projecting parts)
7.7 in.(W)
2.3 in.(H)
10.3 in.(D) (when stored, not including projecting parts)
Weight Approximately 1.8 kg / 4.0 lbs
Operational Temperatures Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice. 
						

							E-64
Table of Supported Frequency
The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table
below.
Manual adjustments may be required for some input signals. See “Picture Adj. / Fine Picture / H Position / V Position” on page
E-41, 42.
VIDEO(NTSC)
VIDEO(PAL/SECAM)
PC/AT
VESA
Apple Macintosh
HDTV (1080i)
(720p)
EDTV (576p)
(480p)
SDTV (576i)
(480i)

640
350
640
400
720
350
720
400
640
350
640
400
720
400
640
480
640
480
640
480
640
480
800
600
800
600
800
600
800
600
800
600
1024
768
1024
768
1024
768
1024
768
1280
1024
640
480
823
624
1024
768
1152
870
1920
1080
1920
1080
1280
720
720
576
720
480
720
576
720
48015.734
15.625
31.5
31.5
31.5
31.5
37.9
37.9
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
48.4
56.5
60.0
68.7
64.0
35.0
49.7
60.2
68.7
33.8
28.1
45.0
31.3
31.5
31.3
31.560.0
50.0
70.1
70.1
70.0
70.0
85.1
85.1
85.0
60.0
72.8
75.0
85.0
56.3
60.3
75.0
72.2
85.1
60.0
70.1
75.0
85.0
60.0
66.7
74.5
74.9
75.1
60.0
50.0
60.0
50.0
60.0
50.0
60.0





































































































































SignalResolution VideoFrequencyHorizonral (kHz)Vertical (Hz)ComponentDigital Analog
* The model name for XGA is KG-PS120X/KG-PS125X and SVGA is KG-PS100S.
* The projector does not support the ADC connector on Apple Macintosh.
KG-PS120X/KG-PS125X
The display resolution is 1024
768 dots. When displaying a signal with resolutions other than 1024
768 dots such as 1280
1024,
sizes of characters or lines may be uneven.
KG-PS100S
The display resolution is 800
600 dots. When displaying a signal with resolutions other than 800
600 dots such as 1024
768,
sizes of characters or lines may be uneven.: Supported frequency
: Not supported frequency 
						

							E-65
Cabinet Dimensions
SOURCE
KEYSTONE
AUTO
KEYSTONEPOWER
STANDBY STATUS
MENU
QUICK MENU
Unit: mm (inch) 195 (7.7)
58 (2.3)262 (10.3) 
						

							2007, KAGA COMPONENTS CO., LTD.