Tascam Portable Cd Vocal Trainer CD-VT1 Owners Manual
Here you can view all the pages of manual Tascam Portable Cd Vocal Trainer CD-VT1 Owners Manual. The Tascam manuals for CD Player are available online for free. You can easily download all the documents as PDF.
Page 1
» CD-VT1 Portable CD Vocal Trainer OWNERʼS MANUAL is appliance has a serial number located on the rear panel lease record the model number and serial number and retain them for your records odel number _____________ erial number _____________ D00771400A
Page 2
2 — TASCAM CD-VT1TASCAM CD-VT1 — 3 English Important safety precautions Y CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSON-NEL. E The lightning flash with arrowhead symbol, within an equilateral trinagle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en-closure that may be of sufficient magnitude...
Page 3
2 — TASCAM CD-VT1TASCAM CD-VT1 — 3 English Important Safety Instructions 1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9 Do not...
Page 4
4 — TASCAM CD-VT1 Safety InformationThis product has been designed and manu-factured according to FDA regulations “title 21, CFR, chapter1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968”, and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.The label...
Page 5
TASCAM CD-VT1 — 5 First steps with your CD-VT1 First steps with your CD-VT1.....5 Making connections..................7 Using the menus........................9 Using the CD player.................10 Pitch and tempo changes........12 Using effects............................13 Facts & figures (specifications)15 About this manual hen we refer to a key or connector or control on the we write it like this PLAY hen we refer to an item shown on the display we write it like this MENU...
Page 6
6 — TASCAM CD-VT1TASCAM CD-VT1 — 7 First steps with your CD-VT1 hen the battery level drops the unit automatically shuts down and must be restarted with the POWER switch after the batteries have been replaced ote that the battery indicator on the display only provides a rough estimate of remaining battery life and under some circumstances there may not be enough power in the batteries to power the despite the battery power indication on the display Using an AC...
Page 7
6 — TASCAM CD-VT1TASCAM CD-VT1 — 7 Making connections Inputs Connecting microphones nly use lowimpedance dynamic microphones you can use highimpedance microphones but the quality may suffer or selfpowered condenser microphones preferably with unbalanced connectors o connect a microphone to the unit simply connect the plug at the end of the microphone cord to one of the MIC IN jacks of the f you are using only one microphone you can connect it to MIC IN 1 or MIC IN...
Page 8
8 — TASCAM CD-VT1TASCAM CD-VT1 — 9 Use the INPUT control to adjust the MIC IN level(s) You can't adjust the input level of LINE IN from the CD-VT1Use the OUTPUT control to adjust the overall level to the LINE OUT and headphones The CD plays at a fixed level, but the MIX feature (5 and b keys outside menu mode) adjusts the balance betwen input and CD Making connections Adjusting the balance Inputs e has three input sources the being played the microphones connected to the MIC...
Page 9
8 — TASCAM CD-VT1TASCAM CD-VT1 — 9 Using the menus ee the table on this page for details of the two menus and their settings o enter the menu system press the LCD MENU key until the menu you want appears shown in a flashing reversed box and the first menu item is shown on the main part of the screen se the up or down keys 6 and n to set the value of the first menu item ote that you do not need to press ENTER to set the values e...
Page 10
10 — TASCAM CD-VT1TASCAM CD-VT1 — 11 Using the CD player e s player works in much the same way as other players with a few minor differences and special features as explained on this page oad s label side up shiny side down in the pen and close the player door by hand by lifting the door tab marked PULL e display shows OPEN when the door is opened CLOSE when it is closed and TOC READ when a s able of ontents ...