Tascam Portable Cd Bass Trainer CD BT1 Owners Manual
Here you can view all the pages of manual Tascam Portable Cd Bass Trainer CD BT1 Owners Manual. The Tascam manuals for CD Player are available online for free. You can easily download all the documents as PDF.
Page 1
» CD-BT1 Portable CD Bass Trainer OWNERʼS MANUAL is appliance has a serial number located on the rear panel lease record the model number and serial number and retain them for your records odel number _____________ erial number _____________ D00764900A
Page 2
2 — TASCAM CD-BT1 TASCAM CD-BT1 — 3 Important safety precautions Y CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSON-NEL. E The lightning flash with arrowhead symbol, within an equilateral trinagle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en-closure that may be of sufficient magnitude to...
Page 3
2 — TASCAM CD-BT1 TASCAM CD-BT1 — 3 Important Safety Instructions 1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9 Do not defeat...
Page 4
4 — TASCAM CD-BT1 Safety InformationThis product has been designed and manu-factured according to FDA regulations “title 21, CFR, chapter1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968”, and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.The label...
Page 5
TASCAM CD-BT1 — 5 First steps with your CD-BT1..............................6 Making connections...........................................8 Using the menu system......................................10 Using the CD player............................................12 Pitch and tempo changes...................................14 Using effects.......................................................15 Effect presets and parameters...........................16 EQ...
Page 6
6 — TASCAM CD-BT1 TASCAM CD-BT1 — 7 First steps with your CD-BT1 About this manual hen we refer to a key or connector or control on the we write it like this PLAY hen we refer to an item shown on the display we write it like this MENU Inserting batteries e uses four batteries not supplied e recommend the use of rechargeable i batteries alkaline batteries may also be used lways use batteries of the same type lways...
Page 7
6 — TASCAM CD-BT1 TASCAM CD-BT1 — 7 First steps with your CD-BT1 Using an AC adapter nly use a adapter not supplied sing another type of adapter may damage your lways make sure that the voltage matches the voltage written on the adapter NOTEAlways remove batteries when operating the unit with an AC adapter. If batteries are ac-cidentally left in the unit when it is operated with an AC adapter, always switch off the unit before...
Page 8
8 — TASCAM CD-BT1 TASCAM CD-BT1 — 9 Making connections Inputs Connecting a bass o connect a bass to the unit simply connect one end of the bass cord to the bass and connect the other to the BASS IN jack of the f you use effects pedals or stomp boxes you can connect the output of these to the remember that the has its own effects f you are using an active bass set the BASS IN slide switch on the side to ACTIVE else set...
Page 9
8 — TASCAM CD-BT1 TASCAM CD-BT1 — 9 Making connections Adjusting the balance Inputs e has three input sources the being played the bass connected to the BASS IN jack any stereo input connected to the LINE IN jack e first and last of these cannot have their input levels changed by the but see below for details of how to balance the with the input se the level control of the device connected to LINE IN to adjust the level of this source...
Page 10
10 — TASCAM CD-BT1 TASCAM CD-BT1 — 11 Using the menu system ee the table on this page for details of the different menus and their settings o enter the menu system press the LCD MENU key until the menu you want appears shown in a flashing reversed box and the first menu item is shown on the main part of the screen se the up or down keys 6 and n to set the value of the first menu item ote that you do not need to press ENTER to set the...