Tascam Dual Cd Player CD-302 Owners Manual

							 TASCAM CD-302 31
5 - Specifications and reference
5.1 Specifications
The following values are applicable when the key and 
tempo values are set to 0:
5.1.1 Dimensions
Disc types 8 cm/12 cm CD
Number of channels 2 channel
Resolution 16-bit
Sampling frequency 44.1 kHz
DA conversion 16-bit, 8x oversampling
Output impedance < 1 kΩ
Maximum output level +6 dBV
Voltage requirements USA/Canada 120 VAC, 60 Hz
U.K./Europe 230 VAC, 50 Hz
Australia 240 VAC, 50 Hz
Power consumption 32 W
Applicable electromagnetic 
environmentE4
Peak inrush current  0.8 A
Dimensions w x h x d
(main unit — 2U)
(remote control units – 5U)482 x 88 x 261 (mm)
19 x 3.5 x 10.3 (in)
482 x 220 x 87 (mm)
19 x 8.7 x 3.4 (in)
Weight (main unit)
(remote control units)5.9 kg (13 lbs)
3.9 kg (6.6 lbs)
Frequency response 20 Hz — 20 kHz ± 1.0 dB
Dynamic range > 98 dB
S/N ratio > 98 dB (IHF-A)
Total harmonic distortion < 0.006%
482mm (19.0)
482mm (19.0)
76mm      (3.0)88mm      (3.5)105mm       (4.1)
220mm (8.7)
102mm    (4.0)
465mm (18.3)
466mm (18.3)3.5mm (0.14)
9.2mm (0.4)  261mm (10.3)
431mm (17.0)
431mm (17.0)
146mm (5.75)
87mm      (3.4) 57mm      (2.25) 
						

							5 • Specifications and reference—Error messages, etc.
32 TASCAM CD-302
5.2 Error messages, etc.
If any of the numbered error messages (1 through 9) 
occur, try using another disc. 
If the errors continue with a number of discs, turn the 
unit off, wait for a few seconds, and turn it on again.
If the errors still continue, contact your TASCAM 
distributor for repair.5.2.1 Spare parts
The following spare parts are readily available from 
your TASCAM distributor should the original such 
parts supplied with your CD-302 become damaged.
9260337700 Joint angle
9783243006 Screw for installing Joint angle
9109030600 Remote cable
NODISCNO DISC No disc is inserted in the try—insert a disc or remove and replace the disc already loaded
ERR 01ERROR 1 No disc—the unit cannot find focus on a disc (after retrying several times)
Err 02ERROR 2 Unused
ERR 03ERROR 3 TOC Read error—the disc’s Table of Contents cannot be read within 20 seconds—try with another disc or remove 
and clean the existing disc before replacing it
ERR 04ERROR 4 GFS error—a GFS error has occurred 3 times within five seconds—try with another disc or remove and clean the 
existing disc before replacing it
ERR 05ERROR 5 Focus error—after repeating the attempt eight times to focus, an error still occurs—try with another disc or remove 
and clean the existing disc before replacing it
ERR 06ERROR 6 Sub-Q error—the sub-Q code cannot be detected (twice within five seconds)—try with another disc
ERR 07ERROR 7 Loading error—the open or close operation cannot be completed, even after retries, or there is an internal error—
make sure that there are no obstructions preventing the tray’s operation
ERR 08ERROR 8 Sled error—an internal drive error—try turning the power off, waiting a few seconds, and turning it on again
Err 09ERROR 9 Error in communication between decks—try turning the unit off, waiting a few seconds, and turning it on again