Home > Tascam > Production Tools > Tascam Digital Audio Production Environment SX-1 Reference Manual

Tascam Digital Audio Production Environment SX-1 Reference Manual

Here you can view all the pages of manual Tascam Digital Audio Production Environment SX-1 Reference Manual. The Tascam manuals for Production Tools are available online for free. You can easily download all the documents as PDF.

Page 101

Part IV–Mixer Controls
 TASCAM SX-1 Reference Manual 101
cally, after the specified amount of time has passed 
without being pressed. This field can be set from 0.5 
seconds to 10 seconds in 0.5 second increments.
Auto Revert Choices With Auto Revert Write 
(or Trim) enabled, the automation system stops writ-
ing (or trimming) switch events automatically on a 
per control basis without the need to end writing 
manually. That is, keys stop recording switch events 
at different times, depending on when...

Page 102

Part IV–Mixer Controls
102 TASCAM SX-1 Reference Manual
Disabling Auto Revert  allows you to manually 
stop writing switch events, either by stopping the 
transport, or by pressing the 
REVERT/ AUTO FADE 
key. In this situation, all controls that are writing will stop writing simultaneously when 
REVERT/ AUTO 
FA D E
 is pressed or play stops.
Below is an example of Writing new switch events 
over previous switch events with Auto Revert dis-
abled:
Disabling Control Sense Timeout
Control Sense Timeout is...

Page 103

Part IV–Mixer Controls
 TASCAM SX-1 Reference Manual 103
operation on that control. The audio passing through 
the control reflects the previous mix moves, com-
bined with the offset created by the Trim operation.In the case of the touch-sensitive faders, trimming 
begins when a fader is touched. In the case of keys 
and knobs, trimming begins when the control is 
moved.
Revert Time
When a control stops trimming mix moves it 
“reverts” to reading any mix data that existed before 
trimming began. The...

Page 104

Part IV–Mixer Controls
104 TASCAM SX-1 Reference Manual
Disabling AUTO REVERT  when TRIM is 
enabled, this allows you to manually stop trimming 
mix moves by stopping play or by pressing the 
REVERT/ AUTO FADE key. In this situation, all con-
trols that are trimming mix moves will stop trimming simultaneously when 
REVERT/ AUTO FADE is 
pressed or playback stops.
Below is an example of trimming fader moves with 
Auto Revert disabled:
Automating Library Recall
The SX-1 automation system is capable of...

Page 105

Part IV–Mixer Controls
 TASCAM SX-1 Reference Manual 105
Combining Library Recall With Dynamic Mix Moves
Dynamic mix moves are treated in a way similar to 
continuous data by the SX-1 automation system. 
Library recall events are instantaneous scenes. If a 
library recall occurs while the automation system is 
reading dynamic mix moves, the affected controls will snap to the positions recalled by the library then 
snap to reading previous dynamic mix moves as the 
time code position crosses the previous...

Page 106

106 TASCAM SX-1 Reference Manual
Part V– Effects
Chapter 14 – Working with Effects
The Philosophy – how it works
The SX-1 has four slots in which to load effects, 
named quadrants. Each quadrant is capable of load-
ing any of the effects that come with the SX-1. The 
list of included effects includes delays, choruses, 
compressors, distortion, microphone and speaker 
simulation and reverb. In most cases the SX-1 has the 
ability to run four discreet versions of any of these 
plugins, reverb being the...

Page 107

Part V–Effects
 TASCAM SX-1 Reference Manual 107
Routing Effects Screens
The effects routing displays let you select, configure, 
and route the effects plugins.
VGA EFFECTS SLOT/ROUTING Module
This module is part of the Effects screen. It houses the 
controls for assigning the effects algorithms to the 
processor slots, and routing the audio inputs and 
outputs.
Effect Slot Selects the placement of the effect 
algorithm in the DSP chain. The selections are:
Internal FX 1-4 The four available native DSP...

Page 108

Part V–Effects
108 TASCAM SX-1 Reference Manual
LOAD PLUGIN Pressing the LOAD PLUGIN soft key 
opens a dialog where you select from a menu of 
effects algorithms.TIP
You can use the arrow keys on the keypad to step 
through the effects plugins. Then, with the one you 
want to load highlighted, press 
ENTER to load the plu-
gin to the selected slot.
Effects Controls Displays
The effects controls screens house the effect plugin’s 
parameters.The controls that appear in these screens change 
according to...

Page 109

Part V–Effects
 TASCAM SX-1 Reference Manual 109
the LCD EFFECTS screen’s controls change according 
to the selected plugin.
From the 
MAIN DISPLAY MODES section, press 
EFFECTS. Then press FX PARAM PAGE 1 to reach the 
first page of the effects parameters.
PREV SLOT Skips back to select the previous 
effects slot.
NEXT SLOT Skips forward to select the next 
effects slot.
ROUTING Opens the EFFECTS screen’s routing page 
(the default page for this screen).
F X  PA R A M  PA G E  1  Since the LCD has...

Page 110

Part V–Effects
110 TASCAM SX-1 Reference Manual
LCD FX LIBRARY Screens
The FX LIBRARY screens mirror the EFFECTS LIBRARY 
module found in the VGA 
Effects screen.
Press the 
FX key in the LIBRARY section and then 
press the 
LIBRARY soft key to reach this screen.
TRANS TIME The amount of time it takes to move 
from the current effect settings to a setting that has 
just been recalled.
IMPORT From the FX LIBRARY screen, press the 
IMPORT soft key. This opens the Import dialog where 
you can bring effect...
Start reading Tascam Digital Audio Production Environment SX-1 Reference Manual

Related Manuals for Tascam Digital Audio Production Environment SX-1 Reference Manual

All Tascam manuals