Tascam Compact Disc Player/reverse Cassette Deck CD-A700 Owners Manual

_ 
11_ 1. Press the POWER switch ON.
2. Set the REV MODE switch to the
required tape travel mode.
3. Load a pre-recorded cassette with its
open edge facing down and side A fac-
ing toward you.
4. Select ON/OFF of the DOLBY NR system.
5. Press the ”or ∏button to start play-
back.
6. Adjust the volume with the amplifiers
volume control.
OTo stop playback, press the STOP (∑)
button.
Playback
The tape counter counts up when the tape
is moving forward and down when the tape
is being rewound.  The display can...

_ 
12_ You can change the tape speed during
playback, allowing to change the pitch of
the reproduced sound.
By turning the PITCH CONTROL to the right,
the tape speed becomes faster, resulting in
a higher pitch. By turning it to the left, the
tape speed becomes slower, resulting in a
lower pitch.
OAt the fully clockwise position, the tape
speed is approx. 12% faster .
OAt the fully counterclockwise position,
the tape speed is approx. 12% slower.
Pitch Control
OIf, by using the Ò, the required CPS
number...

Using the CD SYNC function, a CD-to-tape
copy can be done easily and simply.
1. Load a compact disc.
2. Load a recordable cassette.
3. Select ON/OFF of the DOLBY NR system.
OIn the CD SYNC mode, the INPUT level
control has no effect, as the recording
level is automatically adjusted internally. 
∑To record from the beginning of
the tape
Press the CD SYNC button in the Stop
mode.
The tape is rewound to the beginning of
Side A and the counter is reset to 0000,
while the CD player is in the Ready mode at
the...

The unit has a timer controlled function.
This lets you start playback or recording
operations at any desired time when an
optional audio timer is used.
∑Timer playback of CD or cassette
1. Connect the unit and your stereo system
to an audio timer as shown in the dia-
gram.
2. Set the power switches of all compo-
nents to ON.
3. Load a disc or a prerecorded cassette.
4. Set the timer switch to the CD or TAPE
position.
5. Set the audio timer to the required start
(power on) and stop (power off) times....

Problem Probable cause Remedy
General
No power when POWER is pressed. Power plug not inserted securely. Plug in securely.
Hum. Pin-cord plug not connected securely. Re-connect plug securely.
Noise in tuner. Too close to tuner. Keep a reasonable distance between 
them or switch off the power of 
this unit.
No audio output. Connection to stereo system is incorrect. Check connections.
Remote control unit operation is  POWER switch set to OFF. Set switch to ON.
impossible.
Batteries not inserted in remote...

CD player section(Audio)
Number of channels:2
Frequency response: 20 - 20,000 Hz ± 0.5 dB
Signal-to-noise ratio:90 dB
Total harmonic distortion:0.02% (1 kHz)
Wow and flutter: 
Unmeasurable (quartz accuracy)
Channel separation:75 dB
Pitch control: Approx. ±12 %
Output (RCA):2 Vrms
Output (XLR):+20 dBu
Digital filter:4-times oversampling 
Analog filter:3rd order 
Cassette sectionTrack system:4-track 2-channel stereo
Heads:Record/playback x 1 (rotary
reverse), erase x 1
Type of tape:Cassette tape C-60,...

PRINTED IN CHINA 0799U.
M-1529A
TEAC CORPORATION3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan   Phone: (0422) 52-5082
TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640   Phone: (323) 726-0303
TEAC CANADA LTD. 340 Brunel Road, Mississauga, Ontario L4Z 2C2, Canada   Phone: 905-890-8008
TEAC MEXICO, S.A. De C.V Privada De Corina, No.18, Colonia Del Carmen Coyoacon, Mexico DF 04100 Phone: 5-658-1943
TEAC UK LIMITED 5 Marlin House, Marlins Meadow, The Croxley Centre, Watford, Herts....