Home > Tascam > CD/DVD Duplicator > Tascam CD D4000MK2_owners Manual

Tascam CD D4000MK2_owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Tascam CD D4000MK2_owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 511 Tascam manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    7 - Compare CD-ROM 
      TASCAM CD-D4000 MKII  
    11 6 
    Press the   
    ENTER  
     key from this screen to exit the 
    audio play mode and return to the main mode 
    selection screen. 
    NOTE  
    If the copied CD contains audio errors, you 
    will be able to hear them, but no message will 
    appear on the display. If a copied CD contains 
    audible errors, you may want to consider re-
    recording at a lower speed, which will almost  
    certainly reduce the error rate. 
    8 - Error messages 
    No disc  
     is shown if the   
    MASTER  
     or   
    SLAVE  
     
    drive does not contain a disc, or if the disc cannot be 
    read by the drive (it is upside-down or badly posi-
    tioned in the tray). 
    Bad disc 
     is shown if the   
    SLAVE  
     drive does 
    not contain a recordable CD-R disc or contains a disc 
    which has been previously partly recorded.  
    Master:Bad disc 
     will be shown if 
    the master disc is damaged (e.g. scratched) or unread-
    able in any way.  
    Slave:Bad disc  
    is shown if the slave 
    disc is damaged or unwritable for any reason, the 
    message will be shown.
    The message below occurs under the circumstances 
    described below:
    The standard maximum length of an audio CD is set 
    at 74 minutes. However, some commercial CDs are 
    recorded with a running time a little longer than this. 
    If the master audio CD exceeds the amount of space 
    available on the CD-R slave disc, the display will 
    show:
    The message above will also be shown if the slave 
    disc is of a smaller capacity than the source disc. In 
    these instances, it is impossible to copy from the 
    master to the slave disc. 
    Buffer under run 
     is shown if the 
    master disc is scratched or damaged, or is otherwise 
    unreadable, and the unit has made repeated attempts 
    to read it. It is also shown if the copy operation is 
    attempted at too high a speed.This is because when the CD-D4000 MKII copies 
    data from the   
    MASTER  
     to the   
    SLAVE  
     drive, the 
    data is placed in a RAM (Random-Access Memory) 
    buffer between the two drives. If the   
    SLAVE  
     drive 
    reads the data from this buffer faster than the   
    MASTER  
     drive can write to it, the buffer becomes 
    empty, and the message above appears.
    If this message appears in the Test Write Mode, you 
    can:
    ¥ Clean the disc in the   
    MASTER  
     drive, following the 
    usual method for cleaning CDs (however, if the 
    master disc is warped or off-center, this message 
    may still appear even after cleaning)
    ¥ Reduce the copy speed  
    NOTE  
    If this message appears while the unit is in 
    Copy mode, the destination (  
    SLAVE  
    ) CD-R  
    disc will be unusable. 
    In the event of any of these errors being displayed, 
    pressing the   
    MODE  
     key will return to the main mode 
    selection menu.
    Correct the problem, if possible (replace the offend-
    ing disc correctly in the disc tray, try again with a dif-
    ferent disc, etc.) before attempting the copy operation 
    again. 
    Master:Insuffi-
    cient disc space 
    						
    							 
    13 
      TASCAM CD-D4000 MKII 
    9 - Specifications 
    9.1 Operational speciÞcations 
    9.2 Physical speciÞcations 
    9.3 Dimensional drawing 
    Unit Professional CD and CD-ROM 
    duplicator
    Types of media that may 
    be copied
     
    a
     
    CD-DA (audio CDs) and CD-ROM 
    (ISO9660 standard, etc.)
    Maximum write speed 8 times
    Other speeds 6 times, 4 times, 2 times, real-time
    Audio playback Through drive headphone outputs
    Display 2 x 16 alphanumeric backlit display
     
    a. Subject to appropriate copyright permission 
    being obtained 
    Dimensions (w x h x d) 482 x 104.5 x 288 mm (19 x 4.1 x 
    11.3 in.)
    Weight 6.3 kg (13.9 lbs)
    Voltage requirements: USA/Canada 120 VAC Ô60 Hz
    Korea 220VAC @ 60 Hz
    Europe/UK 230 VAC @ 50 Hz
    Australia 240 VAC @ 50 Hz
    Power consumption 22W
    482mm (19 in.)
    465mm (18.3 in.)
    435mm (17.1 in.)
    290mm (11.4 in.)
    288mm (11.3 in.)
    76mm 
    (3 in.)
    88mm 
    (3.5 in.) 16.5mm 
    (0.7 in.)
     
    TEAC CORPORATION 
      
    Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan 
    TEAC AMERICA, INC. 
    Phone: (323) 726-0303 7733 Telegraph Road, Montebello, California 90640 
    TEAC CANADA LTD. 
    Phone: 905-890-8008  Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada 
    TEAC MEXICO, S.A. De C.V 
    Phone: 5-658-1943 Privada De Corina, No.18, Colonia Del Carmen Coyoacon, Mexico DF 04100 
    TEAC UK LIMITED 
    Phone: 01923-819699 5 Marlin House, Marlins Meadow, The Croxley Centre, Watford, Herts. WD1 8YA, U.K. 
    TEAC DEUTSCHLAND GmbH 
    Phone: 0611-71580 Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany 
    TEAC FRANCE S. A. 
    Phone: 01.42.37.01.02 17 Rue Alexis-de-Tocqueville, CE 005 92182 Antony Cedex, France 
    TEAC BELGIUM NV/SA 
    Phone: 0031-30-6048115 P.A. TEAC Nederland BV, Perkinsbaan 11a, 3439 ND Nieuwegein, Netherlands 
    TEAC NEDERLAND BV 
    Phone: 030-6030229 Perkinsbaan 11a, 3439 ND Nieuwegein, Netherlands 
    TEAC AUSTRALIA PTY.,LTD. A.C.N. 005 408 462  
    Phone: (03) 9644-2442 106 Bay Street, Port Melbourne, Victoria 3207, Australia 
    TEAC ITALIANA S.p.A. 
    Phone: 02-66010500  
    PRINTED IN TAIWAN 
      
    MA-0322 
    						
    All Tascam manuals Comments (0)

    Related Manuals for Tascam CD D4000MK2_owners Manual