Home
>
Surefire
>
Firearms accessories
>
Surefire 307r, 607r Para Ordnance Tactical Light User Manual
Surefire 307r, 607r Para Ordnance Tactical Light User Manual
Have a look at the manual Surefire 307r, 607r Para Ordnance Tactical Light User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 20 Surefire manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Model 307R 607R Para-Ordnance Tactical Light Users Manual Para-Ordnance Pistols .45 caliber Protected by US. Patents 4,777,754, 4,856,218 & 5,654,594 Revision N/C 9_1_2000
Model 307R & 607R Tactical Light Introduction The Model 307R & 607R Tactical Lights provide a rugged and reliable source of high intensity light mounted below the barrel of the weapon. There are two switches that can be used to activate the light. Press on the Slimline Switch on the hand grip and the light will come ON and stay ON as long as pressure is applied. Operate the ON/OFF Switch on the left side of the Housing and the light will come and stay ON until the OFF switch is pressed. Kit Contents ! H07R Housing & Slide Stop ! L30 or L60 Lamp Module ! DL123A or DL223AC Battery ! Users Manual Installation 1. Remove the magazine from the weapon and inspect the weapon to be certain it is not loaded. 2. Disassemble weapon far enough to remove slide stop. 3. Position H07R Housing on the frame so that hole in the side is aligned with slide stop hole on the frame. At the same time place the SlimLine Switch on the hand grip. The connector between the SlimLine Switch and the Housing is spring loaded to hold the switch in place on the hand grip. The spring also serves to eliminate play between the housing and the weapon. 4. Install new Slide Stop. 5. Reassemble weapon. Lamp Replacement 1. Unscrew Bezel from Lamp Module. Lift Lamp assembly out of Bezel. 2. Install replacement Lamp Assembly in Bezel and reassemble by screwing onto Lamp Housing until it is fully seated. Battery Replacement 1. Unscrew Lamp Module from Housing and shake out old battery. 2. Install new battery with the + terminal facing out. 3. Reinstall Lamp Module WARNING Lithium batteries can explode or cause burns if disassembled, shorted, recharged or exposed to fire or high temperatures. Please handle with care.
Model 307R & 607R Tactical Light Repairs & Replacements To obtain repair or replacement call Customer Service at 800-828-8809 (toll free) or 714-545- 9444 and obtain a Return Authorization number (RA). Then pack the unit carefully and return (no COD’s please) to: SureFire LLC Repairs Department, RA# ___ 18300 Mt. Baldy Circle Fountain Valley, CA 92708 Surefire will pay any reasonable shipping costs to return the unit to you. Warranty SureFire warrants that its products will be free from defects in materials and workmanship. SureFire will repair or replace (at its option), without charge, any product or part which is found to be defective under normal use and service. Such repair or replacement shall be the purchaser’s sole and exclusive remedy under this warranty. This warranty does not include normal maintenance and services and does not apply to any products or parts which have been subject to modification, misuse, negligence, accident, improper maintenance or repair by anyone other than SureFire. “Fine Print” Warranty Limitation There is no other express warranty. SureFire hereby disclaims any and all implied warranties, including, but not limited to fitness for a particular purpose. SureFire shall not be liable for incidental, consequential, or special damages arising out of, or in connection with product use or performance. m_H07R_9.301 18300 Mt. Baldy Circle, Fountain Valley, CA 92708 (714) 545-9444Caution The battery used in the light is very powerful. Be sure that the switch is not touching anything when the light is stored. If the lamp is turned on while in a case or other container, the lamp can overheat and damage the light or surrounding materials. Remove the battery or unscrew the bezel far enough to prevent the lamp from turning on when stored. Do not use a 3 Volt Lamp Assembly in a 6 Volt system. The lamp will burn out Immedi- ately!!! To identify a lamp assembly: the 3 volt lamp has a Red label and is marked R30, the 6 volt has a Blue or Green label and is marked R60 or P60. If it is necessary to dispose of any batteries, do not do so by fire, mutilation or by disassembly, as this may cause toxic chemicals to be released. WARNING Lithium batteries can explode or cause burns if disassembled, shorted, recharged or exposed to fire or high temperatures. Please handle with care.