Stihl 441 Cm Manual
Here you can view all the pages of manual Stihl 441 Cm Manual. The Stihl manuals for Saw are available online for free. You can easily download all the documents as PDF.
Page 1
{ STIHL MS 441 C-M WARNING This saw is capable of severe kickback which may cause serious or fatal injury. Only for users with extraordinary cutting needs and experience and training dealing with kickback. Chain saws with significantly reduced kickback potential are available. STIHL recommends the use of STIHL reduced kickback bar and low kickback chain. ADVERTENCIA Esta sierra es capaz de causar contragolpes severos, los cuales pueden causar lesiones graves o mortales. Sólo es apta para...
Page 3
Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. © ANDREAS STIHL AG & Co. KG, 2017 0458-557-8621-B. VA1.J17. 0000002566_016_GB MS 441 C-M English 1 {This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. Contents Allow only persons who fully understand this manual to operate your chain saw. To receive maximum performance and...
Page 4
MS 441 C-M English 2 This Instruction Manual refers to a STIHL chain saw, also called a machine in this Instruction Manual. Pictograms The meanings of the pictograms attached to or embossed on the machine are explained in this manual. Depending on the model concerned, the following pictograms may be on your machine. Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: NA...
Page 5
MS 441 C-M English 3 WARNING The use of this chain saw may be hazardous. The saw chain has many sharp cutters. If the cutters contact your flesh, they will cut you, even if the chain is not moving. WARNING Reactive forces, including kickback, can be dangerous. Pay special attention to the section on reactive forces. Have your STIHL dealer show you how to operate your chain saw. All safety precautions that are generally observed when working with an axe or a hand saw also apply to the operation...
Page 6
MS 441 C-M English 4 WARNING Prolonged use of a chain saw (or other power tools) exposing the operator to vibrations may produce whitefinger disease (Raynaud's phenomenon) or carpal tunnel syndrome. These conditions reduce the hand's ability to feel and regulate temperature, produce numbness and burning sensations and may cause nerve and circulation damage and tissue necrosis. All factors which contribute to white- finger disease are not known, but cold weather, smoking and diseases or...
Page 7
MS 441 C-M English 5 Be particularly alert and cautious when wearing hearing protection because your ability to hear warnings (shouts, alarms, etc.) is restricted. THE CHAIN SAW For illustrations and definitions of the chain saw parts see the chapter on "Main Parts." WARNING Never modify this chain saw in any way. Only attachments supplied by STIHL or expressly approved by STIHL for use with the specific STIHL model are authorized. Although certain unauthorized attachments are useable...
Page 8
MS 441 C-M English 6 Fuel Your STIHL chain saw uses an oil- gasoline mixture for fuel (see the chapter on "Fuel" of your instruction manual). WARNING Fueling Instructions WARNING Fuel your chain saw in well-ventilated areas, outdoors. Always shut off the engine and allow it to cool before refueling. Gasoline vapor pressure may build up inside the fuel tank depending on the fuel used, the weather conditions and the tank venting system. In order to reduce the risk of burns and other...
Page 9
MS 441 C-M English 7 (approx. 1/4 turn). The positioning mark on the cap should now line up with the "closed" mark on the tank. Misaligned, damaged or broken cap NIf the cap does not drop fully into the opening when the positioning marks line up and/or if the cap does not tighten properly when twisted, the base of the cap may be prematurely rotated (in relation to the top) to the closed position. Such misalignment can result from handling, cleaning or an improper attempt at...
Page 10
MS 441 C-M English 8 For proper assembly of the bar and saw chain follow the procedure described in the chapter "Mounting the Bar and Chain" of your instruction manual. STIHL Oilomatic saw chain, guide bar and sprocket must match each other in gauge and pitch. Before replacing any bar and chain, see the chapter entitled "Specifications" in the instruction manual and the chapter "Reactive Forces including Kickback". Since longer bars add weight and may be more difficult...