Stiga Silencium 8217 3033 01 Instruction Manual
Here you can view all the pages of manual Stiga Silencium 8217 3033 01 Instruction Manual. The Stiga manuals for Lawn and Garden are available online for free. You can easily download all the documents as PDF.
Page 1
DEUTSCHD 8217-3033-01Silencium
Page 2
2 SVENSKA S 1. 2.
Page 3
3 SVENSKAS 3. 4.
Page 4
4 ENGLISHGB GENERAL Your garden shredder is a high-quality, efficient machine. Please read the following instructions carefully to ensure a long life of your garden shredder. Do not operate machine before having read the operating instructions, under- stood all the notes and assembly the ma- chine as described here. PROPER USE The garden shredders are suitable for private use in gardens and allotments. Regarded as garden shredders for private gardens and allotments are those units which are not em-...
Page 5
5 ENGLISHGB CHANGING THE DIRECTION OF ROTATION Always switch the device off, wait until it comes to a standstill and shift the safety catch before chang- ing the direction of rotation. Switch on: Turn On-Off switch to “I”. Switch off: Turn On-Off switch to “0”. CHOPPING What can I chop? Ye s : - all types of branches. - withered garden refuse which has lain a num- ber of days. Only shred in alternation with branches. - hard wood, though only with sharp cutter. No: - glass, metal, plastic, plastic bags,...
Page 6
6 ENGLISHGB Generally garden shredders require little mainte- nance. To maintain their efficiency and a long life, observe the following: - keep vent slits clean and free from obstructions. - check the locking screws (tighten where ne- cessary). - clean the device after shredding. - the shredder should not be cleaned with high pressure cleaners or running water. - treat the cutting roller after every use with a biodegradable spray oil as protection against corrosion. - the cutting roller and shaving...
Page 7
8 ENGLISHGB OPERATIONAL FAULTS Problem Possible cause Remedy Motor does not start. - No power supply. - Mains cable defective. - Machine overloaded.-Checkfuses. - Have these checked (electrician). - Overload protection triggered Turn On- Offswitchto“0”andletmachinecool down. Motor hums but does not start.- Cutting roller blocked. - Capacitor faulty.- TurnOn-Offswitchtoleft,thenswitch machine off and remove shredding ma- terial. If the blockage cannot be re- moved immediately switch the On-Off switch...