Steinberg WaveLab 7 Question Manual

							 
2
WaveLab 6 to 7 - FAQ 
 
This document helps WaveLab 5/6 users to familiarize themselves with WaveLab 7. At first sight, 
WaveLab 7 looks quite different compared to older versions. However, once accustomed to the new 
user interface, editing should be an intuitive task. To achieve this, we appeal to your curiosity and sense 
of exploration, and to your willingness to adopt a couple of new habits. The in-application help also has 
a chapter called “Using the interface”. 
 
 
Table of contents 
 
1. Can WaveLab 6 and WaveLab 7 co-exist on the same system?.............................................. 3 
2. How to get help?............................................................................................................................ 3 
3. How do I open or create an Audio Montage or an Audio File?.................................................. 3 
4. Why are Audio File and Audio Montage now operated in different main windows?............... 3 
5. What is a “Tool Window”?............................................................................................................ 3 
6. About customization....................................................................................................................... 4 
7. Some predefined key shortcuts have changed........................................................................... 4 
8. How do I quit WaveLab?............................................................................................................... 4 
9. What is the Control Window?...................................................................................................... 4 
10. With the new windowing system, how to drag-and-drop to a window that I cannot see?... 5 
11. Document windows could be tiled in WaveLab 6, for quick overview. Is this still possible?5 
12. Where are program settings located now?............................................................................... 5 
13. About preferences....................................................................................................................... 5 
14. About File Selector dialogs......................................................................................................... 5 
15. How to create a new folder from the new “Save as” dialog?................................................... 6 
16. Are there settings that can be reused from WaveLab 6?........................................................ 6 
17. I cannot find a menu item already seen in WaveLab 7. What could be wrong?.................... 6 
18. Context menu changes................................................................................................................ 6 
19. Where is the old clip edit menu when I right-click on a clip in the Audio Montage?............. 6 
20. What happened to the marker menu when I right-click on a marker?.................................... 6 
21. “Bypass Master Section” has changed...................................................................................... 7 
22. Where is the function “Render clip to new Audio file”?........................................................... 7 
23. How can I add plug-ins to multiple clips?................................................................................. 7 
24. Scripting has changed................................................................................................................. 7 
25. Some WaveLab 6 plug-ins are missing..................................................................................... 7 
26. I cant find certain features.......................................................................................................... 7 
27. I use WaveLab 7 under Windows, can I also use it on a Mac?............................................... 7 
28. What is new in WaveLab 7 compared to WaveLab 6.............................................................. 8 
 
 
 
 
 
 
 
 
 
 
  
						

							 
3
1. Can WaveLab 6 and WaveLab 7 co-exist on the same system? 
 
Yes, this is possible. You dont need to uninstall WaveLab 6 before installing WaveLab 7. They dont 
share any settings. 
 
 
2. How to get help? 
 
The in-application help system has been renewed. The first thing you should read is the “Getting Help” 
text in the in-application help. For this, in the main menu bar, select Help > Contents. Notably, context-
sensitive help is accessible throughout the application. There are also several tutorial videos available 
that describe the most important parts of the WaveLab 7 workflow. 
 
 
3. How do I open or create an Audio Montage or an Audio File? 
 
There are several ways to do so, but this may be different from WaveLab 6. To get you going, simply 
click on the Switcher Window buttons (the small floating window with large icons that you see when 
launching WaveLab for the first time) . 
 
 
4. Why are Audio File and Audio Montage now operated in different main windows? 
 
Audio files and montages require dedicated audio editing tools. By providing different Workspaces for 
each, you gain more space to visualize information and to interact with specific tools, hence each 
environment lets you work more efficiently. This concept will also allow the program to continue 
growing without cluttering a global interface, as was the case in WaveLab 6. To some new users, 
WaveLab 7 may appear as several independent applications, but this feeling soon disappears when 
you see how easy it is to switch from one window to another. In the in-application help index, look for 
“Switcher”. In the application, experiment with the menu “Global” which is shared by all workspaces, 
e.g., check the F5 shortcut. 
 
 
5. What is a “Tool Window”? 
 
This is a window similar in some ways to an Audio Montage tab in WaveLab 6. The concept has been 
extended to include most parts of WaveLab 7: this is “a window that edits information about a central 
document”. 
 
It is important to note that there are two types of tool windows: 
• explicit
 tool windows: e.g. the CD window is restricted to the Audio Montage Workspace. 
• shared
 tool windows: e.g. the level meter. Since it is useful in different places, it can be moved 
to wherever it is needed. 
Please read the “About Tool Windows” section in the in-application help for more information.  
 
 
 
  
						

							 
4
6. About customization 
 
WaveLab is used on laptops and in multi-screen setups. WaveLab 7 is highly flexible and can easily be 
adapted to your requirements. In a professional environment, you can use three screens, each one 
hosting a workspace with a sophisticated layout of tool windows. On a laptop, you can use one 
workspace in full screen mode with a single tool window. 
 
WaveLab 7 does not force users to follow one particular workflow. Our recommendation is to first learn 
how WaveLab can be configured for your specific needs and setup. Please refer to the in-application 
help chapter called “Using the interface”. 
 
 
7. Some predefined key shortcuts have changed 
 
Due to cross-platform support and application reorganization, it was unavoidable to change some key 
shortcuts. We recommend to learn and adopt these new key shortcuts, but if you want to continue 
using the old shortcuts, this is possible by re-creating them. Please search for “Shortcut system” in the 
in-application help. 
 
 
8. How do I quit WaveLab? 
 
Because multiple main windows can be open simultaneously, WaveLab 7 will not quit when closing the 
active main window. It will quit when the last main window is closed. But the recommended way is to 
simply call the Quit function from any File menu or to use the shortcut “Control+Q” (Windows) or 
“Command+Q” (Mac) . 
 
 
9. What is the Control Window? 
 
This is a dedicated space which can host shared tool windows such as meters and the Master section. 
It can be placed on a second monitor. 
There are three ways to work with shared tool windows:  
• Have them docked in a workspace (preferably with the option “Auto move shared tool 
windows” in the workspace menu) which is perfect if you use a single monitor. 
• Have them float, like in WaveLab 6 (better for the meters if you work both with stereo and 
multichannel configurations) . Adaptable to both single and multiple monitor setups. 
• Have them in the Control window, e.g., if you have two small monitors. 
 
These are 3 different approaches, and we advise to adopt one way and stick to it, rather than switching 
between them. 
 
 
 
 
 
 
 
  
						

							 
5
10. With the new windowing system, how to drag-and-drop to a window that I cannot see? 
 
• Between two different workspaces: drag an object to the Switcher Window, and hover over the 
target workspace for half a second: the target window will automatically come to front, and you 
can drop the object to the new workspace. 
• From one tab to another: drag an object over the desired target tab, and hover there for half a 
second. The target tab will automatically be activated, and you can drop the object to the new 
tab. 
 
 
11. Document windows could be tiled in WaveLab 6, for quick overview. Is this still possible? 
 
This is still possible, though restricted by design to the Audio File workspace. The Tile function is 
available from the main menu Tabs > Tile. You can revert to the standard mode simply by double-
clicking on a window caption bar. 
Note also the new concept of “Tab groups”. See main menu Workspace > Tab groups and the topic 
“Tab Groups” in the manual.  
 
 
12. Where are program settings located now? 
 
They are all located in a single folder. The location depends on the operating system, and can also be 
customized. To know the active location, simply let WaveLab tell you: open the Global preference 
dialog (Options menu of the main menu bar) , and on the first page, click on the label “Open active 
setting folder”. 
 
 
13. About preferences 
 
WaveLab 6 preferences could be found in different places. Rather than mixing unrelated options, the 
concept has been kept and applied to workspaces: “the preferences are located where they apply”, 
e.g.: 
• The Audio File preferences are found in the Audio File Workspace only
. 
• The application preferences are found in all
 Option menus (in the main menu bars) 
• The audio streaming preferences are available in the Options menu of each workspace where 
playback is used. 
• Shortcut customization is accessed in the place where these shortcuts are active (menu or 
button) . 
 
 
14. About File Selector dialogs 
 
The standard file selector (“Open” command) is now the standard operating system file dialog (i.e. not 
customized anymore) . On today’s operating systems, you get favorite folders and previewing functions 
with this dialog. 
WaveLab 7 has put the focus on all-time opened file browsers, a bit like the file browser tab in a 
WaveLab 6 Montage. Each workspace has its own, with its own customizable favorite folders (via drag 
and drop) , and with audio previewing functions (as in WaveLab 6) . Drag and drop and double-clicking 
are the standard actions. 
  
						

							 
6
15. How to create a new folder from the new “Save as” dialog? 
 
There are two options: 
• Click on the folder icon and select “Browse folders” or “Browse files”. 
• Type a new folder name in the Folder edit field and WaveLab will create it for you. 
 
 
16. Are there settings that can be reused from WaveLab 6? 
 
Master Section presets can be imported from a menu that opens at the bottom of the Master Section. 
Other settings from previous versions cannot be reused. 
 
 
17. I cannot find a menu item already seen in WaveLab 7. What could be wrong? 
 
Each workspace has its own menu bar. Some menus are common to all workspaces (menu on the right 
side, i.e. Utilities/Global/Help) , but certain menus, though named similarly, have different content. For 
instance, the File menu of the Audio Montage workspace has “Import > Audio DDP Image”, and this is 
not present in the File menu of the Audio File workspace. To prevent cluttering menus, the functions are 
only included where they are usable. 
 
 
18. Context menu changes 
 
In WaveLab 6, a number of functions were only available through context menus. In WaveLab 7, all 
functions can be accessed from the main menu or from tool windows. The most important functions are 
also available from context menus. Context menus in WaveLab 7 are for comfort and not to access 
functions not found elsewhere. 
 
 
19. Where is the old clip edit menu when I right-click on a clip in the Audio Montage? 
 
The Clip menu in WaveLab 6 contained a multitude of functions and numerous sub-menus. Functions 
were difficult to find and there was no space for further development. Now, a simplified form is provided 
and all functions previously available can be accessed from the Focused Clip tool window. 
Moreover, the Effect part of the old clip menu can be accessed by right-clicking on the Clip name in 
the track area. 
 
 
20. What happened to the marker menu when I right-click on a marker? 
 
You now get a different menu if you click on a marker head, or in free space in the marker ruler. 
Moreover, double-clicking on a marker activates the Marker tool window which contains everything you 
need to edit markers. 
 
 
  
						

							 
7
21. “Bypass Master Section” has changed 
 
In the Render dialog, “Bypass Master Section on resulting Audio File” has a different effect than in 
WaveLab 6. Bypassing is now restricted to the rendered file and is not a global setting anymore. This 
setting can be switched off by clicking on the filter icon at the bottom right of each audio window. 
 
 
22. Where is the function “Render clip to new Audio file”? 
 
For consistency reasons, this function has been integrated among the new options of the Audio 
Montage Render dialog. 
 
 
23. How can I add plug-ins to multiple clips? 
 
This feature is now available with the function “Paste to selected clips” from the Effect tool window. 
 
 
24. Scripting has changed 
 
Scripting in WaveLab 6 was based on Windows operating system requirements. With the new cross-
platform approach of WaveLab 7, the scripting feature had to be redesigned. In the in-application help, 
look for the topic “Scripting”. 
As in the past, this part of the program is for the advanced user and will be enhanced according to 
demands. 
 
 
25. Some WaveLab 6 plug-ins are missing 
 
Most WaveLab 6 plug-ins are still available from the Legacy sub-menu of the plug-in menu, but only on 
the Windows version of WaveLab 7. A few plug-ins, like Resampler192, can no longer be supported 
for technical reasons. If you want to work on both Mac and Windows, it is recommended that you use 
plug-ins that are cross-platform. 
 
 
26. I cant find certain features 
 
The backup plan, the CD label designer, the Audio Database and the Montage video track have not 
been included in this version, because the top priority was to concentrate on the ground audio 
functionalities of WaveLab. Some of these features might be reintroduced in a new form in the future, 
according to feedback. 
 
 
27. I use WaveLab 7 under Windows, can I also use it on a Mac? 
 
Yes, using the same eLicenser USB key, you can install and run WaveLab 7 on the two platforms (but 
not simultaneously) . 
  
						

							 
8
28. What is new in WaveLab 7 compared to WaveLab 6 
 
• Mac OS X compatibility 
• VST-3 plug-in support 
• Many new quality plug-ins from Steinberg 
• New audio restoration plug-ins from Sonnox 
• New DIRAC time stretch engine 
• New multi-core batch processor 
• New state-of-the-art CD/DVD burning engine 
• DDP export and import 
• Totally rewritten user interface for improved editing and workflow 
• New help system 
• Unicode support 
• Localized in 6 languages, incl. Italian and Spanish 
• Generalized use of drag and drop and mouse wheel 
• New shortcut system 
• New scripting tool 
• External tool support 
• Master Project 
• Many dialogs have been enhanced with new options