Steinberg WaveLab 3 Operation Manual

34
Sampler Details 

WAVELAB
34 – 792 Sampler Details
SDS - Generic Sample Dump Standard
Sampler Operating system required:
Latest available.
MIDI:
Required.
SCSI:
N/A.
Loops:
One.
SMDI (Standard SCSI transfer)
Sampler Operating system required:
Latest available.
MIDI:
N/A.
SCSI:
Required.
Loops:
One. 

WAVELAB
Sampler Details 34 – 793
Akai S1000/1100 including PB models
Sampler Operating system required:
4.30 or later.
MIDI:
Required. Also supports SDS.
SCSI:
Not supported.
Loops:
One.
Akai S2000/S2800/S3000/S3200, including all 
“i”, CD, and “XL” derivatives etc.
Sampler Operating system required:
1.50 or later.
MIDI:
Required. Also supports SDS.
SCSI:
Not supported.
Loops:
One. 

WAVELAB
34 – 794 Sampler Details
Ensoniq, EPS, EPS16+, ASR-10, ASR-88
Sampler Operating system required:
EPS: 2.40
ASR-10: 2.53
Other: the latest
MIDI:
Required. Also supports SDS.
SCSI:
Not supported.
Loops:
One.
E-mu Esi-32
Sampler Operating system required:
2.10 or later
MIDI:
Not supported, unless you use SDS.
SCSI:
Required for sampler specific protocol, also supports SMDI.
Loops:
One. 

WAVELAB
Sampler Details 34 – 795
E-mu EIV, e64 and other samplers running the 
EOS operating system
Sampler Operating system required:
2.50 or later
MIDI:
Not supported, unless you use SDS.
SCSI:
Required for sampler specific protocol, also supports SMDI.
Loops:
One.
Kurzweil K2000 and K2500
Sampler Operating system required:
K2000, 3.01 or later, K2500, 2.13 or later
MIDI:
Required, unless you use SMDI. Also supports SDS.
SCSI:
Optional, also supports SMDI.
Loops:
One. 

WAVELAB
34 – 796 Sampler Details
Roland S-760
Sampler Operating system required:
2.17 or later
MIDI:
Required. Also supports SDS.
SCSI:
Not supported.
Loops:
Two. 

35
Troubleshooting 

WAVELAB
35 – 798 Troubleshooting
General problems
Can't create a temporary file
• Please check which drive is specified for your temporary files (in the Edit Folders 
dialog). You cannot use a CD-ROM disk or a write protected drive for your tem-
porary files.
• Is the drive full? Please select a drive with as much free space as possible.
A drive/partition can't be found
• Is this volume a removable drive, or a CD-ROM? In that case, is the correct disk 
really in the drive?
• Have you renamed the...

WAVELAB
Troubleshooting 35 – 799
Problems with opening files
The file doesn't appear in the Open dialog.
• Does the file have the right extension? Select “All files (*.*)” from the pop-up in 
the Open dialog and check again.
• Is the drive on which the file resides currently accessible? If you use removable 
hard disks or CD-ROMs, make sure the right disk is in the drive.
Can't open a file
• Is the file really a supported file type?
• Is it possible to open it in other programs that support files...

WAVELAB
35 – 800 Troubleshooting
Problems with saving files
Can't save
• Is the volume on which you are trying to save write protected? For example, you 
cannot save anything on a CD-ROM.
• Is there enough space on the drive?
• Is the drive to which the file was last saved currently accessible? If you use re-
movable hard disks or CD-ROMs, make sure the right disk is in the drive.
• Are you trying to overwrite another file with the same name? If so, is that file write 
protected? If it is, it...