Steinberg UR824 Installation Guide

							Steinberg TOOLS for UR28M/TOOLS for UR824 Installation Guide1
ATTENTION
• This software and Installation Guide are the exclusive copyrights of Yamaha Corporation.
• Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the 
written consent of the manufacturer.
• Steinberg/Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held 
responsible for the results of the use of this Installation Guide and the software.
• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following 
website.
http://www.steinberg.net
• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
• Windows is the registered trademark of Microsoft® Corporation.
• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited 
except for your personal use.
TOOLS for UR28M is necessary when connecting the device to a computer. When you install the TOOLS for UR28M, “Yamaha 
Steinberg USB Driver” and “Steinberg UR28M Applications” will be installed. The “Yamaha Steinberg USB Driver” allows 
communication between the device and a computer. The “Steinberg UR28M Applications” allows setting the parameters of the 
device from a computer or using the Link function between the device and Cubase series. The “Steinberg UR28M Applications” 
consist of four software components; “dspMixFx UR28M,” “UR28M Extension,” “Sweet Spot Morphing Channel Strip,” and 
“REV-X.”
TOOLS for UR824 is necessary when connecting the device to a computer. When you install the TOOLS for UR824, “Yamaha 
Steinberg USB Driver” and “Steinberg UR824 Applications” will be installed. The “Yamaha Steinberg USB Driver” allows 
communication between the device and a computer. The “Steinberg UR824 Applications” allows setting the parameters of the 
device from a computer or using the Link function between the device and Cubase series. The “Steinberg UR824 Applications” 
consist of four software components; “dspMixFx UR824,” “UR824 Extension,” “Sweet Spot Morphing Channel Strip,” and 
“REV-X.”
NOTICE
What is TOOLS for UR28M?
What is TOOLS for UR824?
Steinberg TOOLS for UR28M/TOOLS for UR824
Installation Guide 
						

							The instructions on installing the TOOLS for UR28M are the same as those applicable when installing this software by using the 
“TOOLS for UR28M” CD-ROM supplied with the UR28M. For instructions on installation, refer to the Getting Started manual of 
the UR28M (printed booklet) supplied with the UR28M. To install this software, double-click “setup.exe” (for Windows) or 
“TOOLS for UR28M.mpkg” (for Mac) in the compressed file that you have downloaded.
NOTE
• If the same software components have already been installed in your computer, you can use the same procedure as described in the Installation 
instructions to update the software.
• The install procedure for Mac OS X 10.7 is the same as Mac OS X 10.6.
• If you do not have the Getting Started manual (printed booklet), you can download the corresponding PDF file from the Steinberg web site.
http://www.steinberg.net
The instructions on installing the TOOLS for UR824 are the same as those applicable when installing this software by using the 
“TOOLS for UR824” CD-ROM supplied with the UR824. For instructions on installation, refer to the Getting Started manual of 
the UR824 (printed booklet) supplied with the UR824. To install this software, double-click “setup.exe” (for Windows) or 
“TOOLS for UR824.mpkg” (for Mac) in the compressed file that you have downloaded.
NOTE
• If the same software components have already been installed in your computer, you can use the same procedure as described in the Installation 
instructions to update the software.
• The install procedure for Mac OS X 10.7 is the same as Mac OS X 10.6.
• If you do not have the Getting Started manual (printed booklet), you can download the corresponding PDF file from the Steinberg web site.
http://www.steinberg.net
Installing TOOLS for UR28M
Installing TOOLS for UR824
C.S.G., Pro Audio Division
© 2011 Yamaha Corporation
108MW-A0