Steinberg Cubase VST VST Plug-ins Manual

 
VST plug-ins from previous Cubase versions CUBASE SX/SL
 21
Freq Sets the oscillator frequency +/- 2 octaves within the selected 
range.
Roll Off Cuts high frequencies in the oscillator waveform, to soften the 
overall sound. This is best used when harmonically rich wave-
forms are selected (e.g. square or saw).
Stereo Phase Invert Flips the phase of the oscillator waveform on the right channel.
LFO Waveform Selects the LFO waveform; square, sine, saw or triangle.
LFO Freq Sets the LFO Speed.
EG Mod...

 
CUBASE SX/SL VST plug-ins from previous Cubase versions
 22 
subBASS
 
The subBASS is a bass synthesizer that can generate low frequency 
content and track the pitch from the audio material for deep, sub-sonic 
bass effects.
The parameters are as follows: 
Parameter Description 
Mode There are three modes of operation: Boost produces a warm bass boost 
to the signal. Divide generates a pitch tracking signal an octave below 
the input signal. Trigger adds a decaying “boom” produced by an oscilla-
tor,...

 
VST plug-ins from previous Cubase versions CUBASE SX/SL
 23 
Tranceformer2
 
Tranceformer2 is a previous version of the Tranceformer plug-in. The 
parameters are the same with the addition of an input level control.  

 
CUBASE SX/SL VST plug-ins from previous Cubase versions
 24 
Earlier audio effect plug-ins
 
Autopan
 
This makes the sound move automatically between the left and right 
channel.
The parameters are as follows: 
Parameter Explanation 
LFO Freq This sets the speed of the panning effect.
Width This sets the depth of the effect, that is, how far out to the left/right 
speaker the sound should move.
Waveform This sets the shape of the LFO producing the effect. Sine and Tri-
angle both produce a smooth...

 
VST plug-ins from previous Cubase versions CUBASE SX/SL
 25 
Choirus and Choirus 2
 
For some computer configurations, the original Choirus effect gave rise 
to clicks and distorted sound. The Choirus2 effect solves this problem. It 
is identical to the “Choirus Classic” featurewise, but draws slightly more 
 
computer power.
 
Choirus is a chorus and flanger effect which adds “depth” and “ani-
mation” to a sound. It basically works as follows: The original signal is 
delayed and the amount of delay is...

CUBASE SX/SL VST plug-ins from previous Cubase versions
 26
Espacial
This is a basic reverb effect with dedicated control over early reflec-
tions. As there is no Mix control, you should use this as a send effect 
(an insert on an FX Channel track). Please note though that the Espa-
cial is a mono in-stereo out effect - when used on a stereo channel, 
only the left or right channel will be processed (depending on the 
routing settings you make for the insert slot).
The parameters are:
Parameter...

VST plug-ins from previous Cubase versions CUBASE SX/SL
 27
Electro Fuzz
This is a simulation of the good old transistor distortion stomp box. It 
accepts a mono input and is used as an Insert or Send Effect.
The Electro Fuzz has the following parameters:
•Boost
This governs the amount of distortion. If you want to increase the distortion without 
raising the signal level, you may have to adjust the Volume knob as well.
•Clipback
Raising this parameter will “invert” the part of the signal that is above...

CUBASE SX/SL VST plug-ins from previous Cubase versions
 28
Scopion
The Scopion is an basic on-board oscilloscope that analyzes the left 
or right side of a stereo input signal and displays the waveform con-
tents in real time. There are three parameters:
•If you click the Scopion label plate below the display, a help screen will 
be shown, explaining the functionality of the parameters in the window.
Parameter Description
L/R Switch Clicking this switch allows you to choose between displaying the 
left...

VST plug-ins from previous Cubase versions CUBASE SX/SL
 29
Stereo Echo
The Stereo Echo is a delay with separate settings for the left and right 
channel. It can also be used as a single mono delay, in which case the 
maximum delay time will be doubled.
The Stereo Echo accepts a mono input only. It is normally used as a 
Send Effect.
The Stereo Echo has the following parameters:
Parameter Explanation
Delay1 The delay time for the left channel. The maximum delay time depends on 
the sample rate setting....

CUBASE SX/SL VST plug-ins from previous Cubase versions
 30
Stereo Wizard
The Stereo Wizard is a stereo width enhancer that takes a stereo input 
signal and makes it sound “wider”. StereoWizard will give best result if 
you use “real” stereo material (as opposed to mono channels panned 
to different positions in the stereo image), but you could also apply ste-
reo ambience or reverb to a mono signal, and then use Stereo Wizard 
to enhance the stereo width of the reverb.
The Stereo Wizard has the...