Steinberg CI2 Operation Manual

EN
DE
FR
ES
JA 

2CI2 Operation Manual
1. IMPORTANT NOTICE: 
DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in 
the instructions contained in this manual, 
meets FCC requirements. Modifications not 
expressly approved by Yamaha may void 
your authority, granted by the FCC, to use 
the product.
2. IMPORTANT: When connecting this prod-
uct to accessories and/or another product 
use only high quality shielded cables. Cable/
s supplied with this product MUST be used. 
Follow all installation instructions....

CI2 Operation Manual3
English
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death 
from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but 
are not limited to, the following:
• Do not open the device or attempt to disassemble the 
internal parts or modify them in any way. The...

4CI2 Operation Manual
English• When turning on the AC power in your audio system, 
always turn on monitor speakers LAST, to avoid speaker 
damage. When turning the power off, monitor speakers 
should be turned off FIRST for the same reason.
• Do not insert a finger or hand in any gaps on the device. 
• Never insert or drop paper, metallic, or other objects into 
the gaps on the panel. If this happens, turn off the power 
immediately and unplug the power cord from the AC 
outlet. Then have the device...

CI2 Operation Manual5
Contents
English
Contents
Introduction ..........................................................................6
Features .............................................................................................. 6
Package Contents ........................................................................... 6
About the Included Disks ............................................................... 7
About the power...

6CI2 Operation Manual
Introduction
English
Introduction
Thank you for your purchase of the ADVANCED INTEGRATION USB STUDIO CI2. Using Cubase, 
the CI2 is a highly intuitive, indispensable aid in recording, editing and sound shaping. Simply connect 
the CI2 to your computer via USB, and you’ve got a comprehensive control center and seamless en-
vironment for complete music production with Cubase.
Please read the Operation Manual (this book) so that you can take full advantage of its superlative 
features...

CI2 Operation Manual7
Introduction
English
About the Included Disks
Disk Contents
Each of the included disks contains the follow-
ing software (driver).
TOOLS for CI2 CD-ROM
• TOOLS for CI2
Cubase AI DVD-ROM
•Cubase AI
IMPORTANT
Before breaking the seal of these disk packages, 
please read carefully the Software License Agreement 
on pages 26 and 28 of this manual. By opening the 
each of disk packages, you indicate your agreement 
with the use terms of the software and concurrence 
with the Software...

8CI2 Operation Manual
Introduction
English
Mac OS X 
NOTE
• A DVD drive is required for installation
• In order to have continuous use of Cubase AI, in-
cluding support and other benefits, you will need to 
register the software and activate your software li-
cense by starting it while the computer is connected 
to the internet.
• Note that the system requirements may be slightly 
different from those described above depending on 
the particular operating system.
• The audio input and output functions of...

CI2 Operation Manual9
Software Installation
English
Software Installation
To use the CI2 you must first install the software on the computer. This section explains the software 
installation. Install Cubase AI before you install TOOLS for CI2.
NOTE
If you have already installed a version of Cubase that is compatible with operation with the CI2 (page 15), the in-
structions on installing Cubase AI described below are no
for CI2.Ž
Installing Cubase AI
IMPORTANT
Before breaking the seal of the Cubase AI...

10CI2 Operation Manual
Software Installation
English
Windows Vista / Windows XP
Preparing to install 1 
(Windows Vista / Windows XP)
1.
Disconnect all the devices other than 
the mouse and keyboard from the com-
puter.
2.Start the computer and log on to the Ad-
ministrator account.
Exit any open applications and close all open 
windows.
3.Select [Start]  ( [Settings] ) [Control 
Panel], click “Switch to Classic View” in 
the upper left of the window.
NOTE
After completing the installation, make sure to...