Steinberg CC121 V1.6 New Functions New Functions Manual
Have a look at the manual Steinberg CC121 V1.6 New Functions New Functions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 523 Steinberg manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CC121 New Functions The new functions of the CC121 are described below. Cubase version 5.1.1 or later is necessary for the new functions. EQ gain inverse You can invert the gain of individual EQ bands or the entire EQ gain curve on Cubase via the EQ section. Operation is as follows. Individual EQ bands Hold down [EQ TYPE] and press desired [ON]. Entire EQ gain curve Hold down [ALL BYPASS] and press one of [ON]. Each [ON] has the same function in this case. The EQ gain invert function is not available while the CC121 is in the Quick Control mode. Jog/Shuttle function with scrubbing Scrub operation is available via the Jog/Shuttle function in the AI Knob section. Operation is as follows. 1Hold down [JOG] to call up the CC121 control panel window. When the window appears, release [JOG]. 2Press [JOG] to switch the Jog Mode setting to [Shuttle] or [Scrub]. Each setting in the Jog Mode works as follows. For details, refer to the CC121 and Cubase Operation Manual. Jog: Works as the CC121 standard Jog/Shuttle function. Shuttle: Works as the “Shuttle speed” function on Cubase.
Scrub: Works as the “Jog wheel” function on Cubase. You can adjust the Jog wheel speed by the pull-down menu on the right side. The larger the number, the faster the speed. 3Hold down [JOG] to close the CC121 control panel window. When the window closes, release [JOG]. 4Operate AI KNOB. Switching the function in the Function section You can switch between functions by using the knob in the Function section. Operation is as follows. 1Hold down [JOG] to call up the CC121 control panel window. When the window appears, release [JOG]. 2Press [VALUE] knob to select the Bank. 3Press [VALUE] knob to switch the Bank setting. You can switch the function selected in the Bank to the “Studio Control,” ”Monitor Control,” or “User Assignable.” For details, refer to the CC121 Operation Manual. 4Hold down [JOG] to close the CC121 control panel window. When the window closes, release [JOG]. U.R.G., Pro Audio Division © 2010 Yamaha Corporation 008MW-B0