Home > Star > Firearms > Star Progressive Reloader Instructions Manual

Star Progressive Reloader Instructions Manual

Add to Favourites
    Download as PDF

    View the Star Progressive Reloader Instructions Manual for free. All the Star manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 INSTRUCTIONS for Installing and Operating the Star Progressive Reloading Machine If you are not an experienced reloader you should get assistance from some experienced person, preferably some one that has operated the Star tool. There have been many guns blown apart and some personal injuries on account of faulty operation and care of the loading tools. The modern pistol powders have approximately the power of dynamite, and primers may ignite very easily. We recommend wearing plastic goggles for...
    Page 2 When you think you fully understand all of the operations you can arrange for reloading by inserting the long brass tube (which is the primer magazine) into the brass ferrule at the right of machine; be sure it seats to the bottom in ferrule. Use the short tube (there is one for each size primer) for picking up the primers. After placing them in a flat bottom container, push the filler tube don over the primers that are closed end up. When full, invert over primer magazine, pull cotter pin and push...
    Page 3 TO CHANGE PRIMER SLIDES, TOOL HEADS AND PUNCH Unhook tool head spring. Drive out taper pin that holds T casting at top, lift it and tool head off. Remove stop pin in safety cam and swing clear. Loosen clamp screw in thrust nut, and remove nut and plate from machine. Unscrew primer slide angle lever screw (#50) enough to raise angle lever (#48) so primer slide will come out. Remove primer punch nut with slotted screw driver. By punching down on the plunger at left, primer punch will raise so you may...
    Page 4 DO NOT oil the powder slide or allow oil to run into it from the machine; keep hopper clean and dry. DO NOT FINGER the safety cam after the first finished shell operates it as there is danger of double charging if you do. DO NOT FORGET your powder hopper and let it run empty. DO NOT use gasoline or solvent on your shells. It makes them so dry that they may stick to the die and cause scratches. After your shells are clean and free of grit just before starting to reload, dip the tips of your...
    Start reading Star Progressive Reloader Instructions Manual

    Related Manuals for Star Progressive Reloader Instructions Manual

    All Star manuals