Home
>
Standard Horizon
>
Communications receiver
>
Standard Horizon Marine Tranciever Quantum GX35000S Operating Instructions
Standard Horizon Marine Tranciever Quantum GX35000S Operating Instructions
Here you can view all the pages of manual Standard Horizon Marine Tranciever Quantum GX35000S Operating Instructions. The Standard Horizon manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
Page 61 GX3500S
12.2 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
F]
key followed by the [
6(
NAV)]
key.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Time Set” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select time...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-60.png "Page 61
Page 61 GX3500S
12.2 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
F]
key followed by the [
6(
NAV)]
key.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Time Set” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select time...")
Page 61 GX3500S 12.2 TIME OFFSET This selection sets the time offset between local time and UTC (time GPS sends to radio). Time is displayed when GPS position (LAT/LON) is displayed by pressing the [ F] key followed by the [ 6( NAV)] key. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ Time Set” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select time...
Page 62
![Page 62
GX3500S Page 62
12.3 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
F]
key followed by the [
6(
NAV)]
key.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Time Disp.” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-61.png "Page 62
GX3500S Page 62
12.3 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
F]
key followed by the [
6(
NAV)]
key.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Time Disp.” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to...")
GX3500S Page 62 12.3 TIME LOCATION This selection selects the time display between local time and UTC (time GPS sends to radio). Time is displayed when GPS position (LAT/LON) is displayed by pressing the [ F] key followed by the [ 6( NAV)] key. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ Time Disp.” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to...
Page 63
![Page 63
Page 63 GX3500S
12.5 PRIORITY CHANNEL SET
Allows selection of the priority channel.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Priority CH” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
5. Press the [
ENT]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-62.png "Page 63
Page 63 GX3500S
12.5 PRIORITY CHANNEL SET
Allows selection of the priority channel.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Priority CH” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
5. Press the [
ENT]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [...")
Page 63 GX3500S 12.5 PRIORITY CHANNEL SET Allows selection of the priority channel. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ Priority CH” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select the chan- nel to be a priority. 5. Press the [ ENT] key to store the selected setting. 6. To exit this menu and return to radio operation mode press the [...
Page 64
![Page 64
GX3500S Page 64
12.7 SCAN RESUME TIME
This selection is used to select the time the GX3500S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
SCAN Resume” in
the “
Radio Setup” menu with the CHANNEL selec-
tor knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec,” “2sec,” “3sec,” or...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-63.png "Page 64
GX3500S Page 64
12.7 SCAN RESUME TIME
This selection is used to select the time the GX3500S waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
SCAN Resume” in
the “
Radio Setup” menu with the CHANNEL selec-
tor knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec,” “2sec,” “3sec,” or...")
GX3500S Page 64 12.7 SCAN RESUME TIME This selection is used to select the time the GX3500S waits after a transmis- sion ends before starting scanning. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ SCAN Resume” in the “ Radio Setup” menu with the CHANNEL selec- tor knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select the de- sired resume time. The resume time can be set to “ 1sec,” “2sec,” “3sec,” or...
Page 65
![Page 65
Page 65 GX3500S
12.9 WX ALERT
This selection allows the radios NOAA Weather alert to be turned off. Default
setting is ON.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
WX Alert” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be set
to “
On WX,” “On SCAN,” “On SCAN/WX,” or “Off.”
5. Press the [...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-64.png "Page 65
Page 65 GX3500S
12.9 WX ALERT
This selection allows the radios NOAA Weather alert to be turned off. Default
setting is ON.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
WX Alert” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be set
to “
On WX,” “On SCAN,” “On SCAN/WX,” or “Off.”
5. Press the [...")
Page 65 GX3500S 12.9 WX ALERT This selection allows the radios NOAA Weather alert to be turned off. Default setting is ON. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ WX Alert” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select the de- sired WX alert mode. The WX alert mode can be set to “ On WX,” “On SCAN,” “On SCAN/WX,” or “Off.” 5. Press the [...
Page 66
![Page 66
GX3500S Page 66
12.10 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
CH Name” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be named, then press the [
ENT]
key.
5. Press the one of the Keypad keys to enter the first
letter of...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-65.png "Page 66
GX3500S Page 66
12.10 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
CH Name” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be named, then press the [
ENT]
key.
5. Press the one of the Keypad keys to enter the first
letter of...")
GX3500S Page 66 12.10 CHANNEL NAME CHANGE This selection allows you to customize the name of a channel from the default name. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ CH Name” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select the chan- nel to be named, then press the [ ENT] key. 5. Press the one of the Keypad keys to enter the first letter of...
Page 67
![Page 67
Page 67 GX3500S
12.11 NAMING THE RADIO OR RAM+ STATIONS
This selection allows you to provide the name to the radio and optional RAM+
Mic’s when connected.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Unit Name” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the Unit
(Radio, RAM 1, or RAM2) to be named, then press
the [
ENT]
key.
5. Press the one...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-66.png "Page 67
Page 67 GX3500S
12.11 NAMING THE RADIO OR RAM+ STATIONS
This selection allows you to provide the name to the radio and optional RAM+
Mic’s when connected.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appears.
2. Press the [
ENT]
key, then select “
Unit Name” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select the Unit
(Radio, RAM 1, or RAM2) to be named, then press
the [
ENT]
key.
5. Press the one...")
Page 67 GX3500S 12.11 NAMING THE RADIO OR RAM+ STATIONS This selection allows you to provide the name to the radio and optional RAM+ Mic’s when connected. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appears. 2. Press the [ ENT] key, then select “ Unit Name” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select the Unit (Radio, RAM 1, or RAM2) to be named, then press the [ ENT] key. 5. Press the one...
Page 68
![Page 68
GX3500S Page 68
12.12 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appear.
2. Press the [
ENT]
key, then select “
Fog Freq.” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-67.png "Page 68
GX3500S Page 68
12.12 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [
CALL(
MENU)]
key until
“
Radio Setup” menu appear.
2. Press the [
ENT]
key, then select “
Fog Freq.” in the
“
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the [
ENT]
key.
4. Turn the CHANNEL selector knob to select...")
GX3500S Page 68 12.12 FOG ALERT TONE FREQUENCY This selection allows you to select the Alert Tone Frequency for the PA/FOG Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps. The default Alert Tone Frequency is 400 Hz. 1. Press and hold down the [ CALL( MENU)] key until “ Radio Setup” menu appear. 2. Press the [ ENT] key, then select “ Fog Freq.” in the “ Radio Setup” menu with the CHANNEL selector knob. 3. Press the [ ENT] key. 4. Turn the CHANNEL selector knob to select...
Page 69
Page 69 GX3500S 13 ENHANCED RAM+ MIC OPERATION When the RAM+ microphone is connected to the GX3500S, most VHF, DSC, setup menus and PA modes can be remotely operated. The RAM+ Mic sup- plied with 23 feet (7 m) of routing cable and can be extended up to 70 feet (21 m) using three 23 feet extension cables model CT-100. The intercom operation can be used between the RAM+ Mic and the transceiver. 13.1 RAM+ MIC CONTROLS SQUELCH CONTROL ( SQL) Activates the squelch adjusting mode. Press this key to activate...
Page 70
![Page 70
GX3500S Page 70
POWER SWITCH (
PWR)
Press and hold down this key to turn to the transceiver and RAM+ Mic on
and off.
PTT (
Push-To-Talk)
SWITCH
Activates transmission.
[
H/L]
KEY
Toggles between high and low power. When the [
H/L]
key is pressed while
the transceiver is on channel 13 or 67, the power will temporarily switch
from LO to HI power until the PTT is released. The [
H/L]
key does not
function on transmit inhibited and low power only channels.
[
](
UP)
/[
](
DOWN)
KEY
These keys are used...](http://img.usermanuals.tech/thumb/4560/84191/w300_standard_gx3500s-marine-tranciever_manual_d-69.png "Page 70
GX3500S Page 70
POWER SWITCH (
PWR)
Press and hold down this key to turn to the transceiver and RAM+ Mic on
and off.
PTT (
Push-To-Talk)
SWITCH
Activates transmission.
[
H/L]
KEY
Toggles between high and low power. When the [
H/L]
key is pressed while
the transceiver is on channel 13 or 67, the power will temporarily switch
from LO to HI power until the PTT is released. The [
H/L]
key does not
function on transmit inhibited and low power only channels.
[
](
UP)
/[
](
DOWN)
KEY
These keys are used...")
GX3500S Page 70 POWER SWITCH ( PWR) Press and hold down this key to turn to the transceiver and RAM+ Mic on and off. PTT ( Push-To-Talk) SWITCH Activates transmission. [ H/L] KEY Toggles between high and low power. When the [ H/L] key is pressed while the transceiver is on channel 13 or 67, the power will temporarily switch from LO to HI power until the PTT is released. The [ H/L] key does not function on transmit inhibited and low power only channels. [ ]( UP) /[ ]( DOWN) KEY These keys are used...