Standard Horizon HX370S Handheld Tranciever Operating Instructions

HX370SPage 39
9.  WARRANTY
Marine Products Limited Warranty
STANDARD HORIZON (a division of VERTEX STANDARD) warrants, to the
original purchaser only, each new Marine Communications Product (“Prod-
uct”) manufactured and/or supplied by STANDARD HORIZON against de-
fects in materials and workmanship under normal use and service for a
period of time from the date of purchase as follows:
3 years Waterproof - if purchased after 01/01/94
Associated Chargers
3 years - if purchased after 01/01/91
Associated...

HX370SPage 40
This limited warranty does not extend to any Product which has been sub-
jected to misuse, neglect, accident, incorrect wiring by anyone other than
STANDARD HORIZON, improper installation, or subjected to use in viola-
tion of instructions furnished by STANDARD HORIZON, nor does this war-
ranty extend to Products on which the serial number has been removed,
defaced, or changed. STANDARD HORIZON cannot be responsible in any
way for ancillary equipment not furnished by STANDARD HORIZON which...

HX370SPage 41
Note: The flat rate amount is payable by the Owner only if STANDARD
HORIZON or the STANDARD HORIZON Dealer determines that a repair is
needed. After the repair, a 90-day warranty will be in effect from the date of
return of the unit to the Owner.
This service program is not available for equipment which has failed as a
result of neglect, accident, breakage, misuse, improper installation or modi-
fication.
ON-LINE WARRANTY REGISTRATION
Please visit www.standardhorizon.com to register the...

HX370SPage 42
10. SPECIFICATIONS
10.1 General
Frequency range: 156 MHz - 163.275 MHz (Marine Band + WX Band)
Channel Steps: 25 kHz
137 MHz - 174 MHz (LMR)
Channel Steps: 12.5 / 25 kHz
Frequency stability: ± 2.5 ppm (–22 °F to +140 °F [–30 °C to +60 °C])
Emission type: 16K0G3E, 16K0F3E, 11K0F3E
Antenna impedance: 50 Ohms
Supply voltage: 7.2 VDC
Current consumption: 200 mA (Receive)
40 mA (Standby, Saver Off)
TX: 1.4 A (H)/0.9 A (M)/0.5 A (L)
Operating Temperature: –22 °F to +140 °F (–30 °C to +60 °C)...

HX370SPage 43
MEMO 

HX370SPage 44
MEMO 

This device complies with part 15 of the FCC rules. Operation is subject
to the condition that this device does not cause harmful interference.
Part 15.21: Changes or modifications to this device not expressly ap-
proved by Vertex Standard could void the User’s authorization to oper-
ate this device.
HX370S 

Copyright 2005
VERTEX STANDARD CO., LTD.
All rights reserved.
No portion of this manual
may be reproduced
without the permission of
VERTEX STANDARD CO., LTD.
Printed in Japan
Marine Division of VERTEX STANDARDUS Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
www.standardhorizon.com
EM008N150