Home > Sound Devices > Music Production System > Sound Devices 302 Production Mixer User Guide

Sound Devices 302 Production Mixer User Guide

Add to Favourites
    Download as PDF

    View the Sound Devices 302 Production Mixer User Guide for free. All the Sound Devices manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Compact Production Mixer User Guide and Technical Information Sound Devices, LLC 300 Wengel Drive Reedsburg, WI 53959 USA tel: +1 (608) 524-0625 fax: +1 (608) 524-0655 www.sounddevices.com info@sounddevices.com
    Page 2 page 2 302 Compact Production Mixer User Guide and Technical Information TABLE OF CONTENTS Quick Start Checklist . . . . . . . . . . . . .3 Powering Interconnection Setting Output Gain Structure Setting Input Levels Monitoring Front Panel Descriptions . . . . . . . . . . .4 Input Panel Descriptions . . . . . . . . . . .5 Output Panel Descriptions . . . . . . . . .5 Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Mic/Line Level Selection Gain (Trim) Fader Phantom and T-...
    Page 3 302 Compact Production Mixer User Guide and Technical Information page 3 QUICK STA RT CHECKLIST Proper setup of sound sources and input devices is quick and easy with the 302. Follow the steps outlined below for basic interconnection. Powering 1. Insert three AA-batteries with + side fi rst into the mixer battery tube. 2. Switch on the mixer power by sliding the power switch to INT. The power LED will illuminate solid green with good batteries. Interconnection 1. Connect the output XLR...
    Page 4 page 4 302 Compact Production Mixer User Guide and Technical Information FRONT PANEL DESCRIPTIONS 3 45 6 7 8910 14 2 11 1213 1 15 16 1718 1. Gain (Trim) The coarse gain control. Sets the input sensitivity so that the Fader can be used for fi ne gain control with the channel fader. 2. Fader The primary control for input adjusting level during operation. 3. Pan Switch Assigns the input channel to the output bus. Left- only, Center (equal left and right), or Right-only. 4. Peak LED When...
    Start reading Sound Devices 302 Production Mixer User Guide
    All Sound Devices manuals