Sony Vpl Ex1 Projector User Manual

 Data Projector          VPL-CS6/VPL-CX6/VPL-EX1
© 2003 Sony Corporation
4-095-440-12 (1)
Data Projector
GB
FR
ES Operating Instructions 
Mode d’emploi 
Manual de instrucciones 
VPL-CS6
VPL-CX6
VPL-EX1 

GB 2
WARNING
To prevent fire or shock hazard, do 
not expose the unit to rain or 
moisture.
To avoid electrical shock, do not 
open the cabinet.  Refer servicing to 
qualified personnel only. 
For the customers in the USA
If you have any questions about this product, 
you may contact:
Sony Electronics Inc.
Attn: Business Information Center (BIC)
12451 Gateway Boulevard
Ft. Myers, Florida 33913
Telephone No.: 800-686-7669The number below is for FCC related 
matters only.
Declaration of Conformity
Trade...

3 GB
For the customers in Canada
This Class B digital apparatus complies with 
Canadian ICES-003.
Voor de klanten in Nederland 
Gooi de batterij niet weg 
maar lever deze in als klein 
chemisch afval (KCA).
The socket-outlet should be installed near 
the equipment and be easily accessible. 

GB 4 

5 GB
Table of Contents
GB
Overview
Precautions ......................................... 6
Notes on Installation  .......................... 7
Unsuitable Installation .................. 7
Unsuitable Conditions  .................. 7
Usage in High Altitude ................. 8
Features .............................................. 8
Location and Function of Controls   . 10
Top/Front/Left Side  .................... 10
Rear/Right Side/Bottom  ............. 10
Control Panel  .............................. 12...

GB 6Precautions
BOverview
Precautions
On safety
 Check that the operating voltage of your 
unit is identical with the voltage of your 
local power supply.
 Should any liquid or solid object fall into 
the cabinet, unplug the unit and have it 
checked by qualified personnel before 
operating it further. 
 Unplug the unit from the wall outlet if it is 
not to be used for several days. 
 To disconnect the cord, pull it out by the 
plug. Never pull the cord itself. 
 The wall outlet should be near the...

7 GBNotes on Installation
Overview
Notes on Installation
Do not install the projector in the following 
situations. These installations may cause 
malfunction or damage to the projector.
Poorly ventilated
 Allow adequate air circulation to prevent 
internal heat build-up. Do not place the 
unit on surfaces (rugs, blankets, etc.) or 
near materials (curtains, draperies) that 
may block the ventilation holes. When the 
internal heat builds up due to the block-up, 
the temperature sensor will function with...

GB 8Features
Tilting the unit to the right or left
Avoid tilting the unit to an angle of 15°, and 
avoid installing the unit in any way other 
than placing on the floor or suspending from 
the ceiling. Such installation may cause 
color shading or shorten the lamp life 
excessively.
Blocking the ventilation holes
Avoid using something to cover over the 
ventilation holes (exhaust/intake); 
otherwise, the internal heat may build up.
For details on the ventilation holes (intake/
exhaust), see “Location and...

9 GBFeatures
Overview
Easy presentation
 Simple setup with external equipment
This projector is preset for 38 kinds3) 
(VPL-CX6/EX1) of input signals. You can 
project images from an external signal 
source just by connecting the equipment 
with the supplied cable.
You can use the supplied Remote 
Commander as the wireless mouse by 
connecting the projector to the computer 
with the USB cable
4).  You can also 
control the projector by using the 
application software (Projector Station)
5) 
supplied...

GB 10Location and Function of Controls
Location and 
Function of Controls 
  
1I / 1  (on/standby) key
Turns on the projector when the 
projector is in standby mode. The ON/
STANDBY indicator around the I / 1 
key lights in green when the power is 
turned on.
When turning off the power, press 
the I / 1 key twice following the 
message on the screen, or press and 
hold the key for about two seconds.For details on steps for turning off the 
power, see “To turn off the power” on 
page 29.
2ON/STANDBY...