Sony Vaio Sony Vaio Vgntx Manual

TX Series
Confidential
Mother Board-3
1.MS-1-D.17(a)
5[MA]
Remove the three screws.
9)
Peel off the Tape (Common).
Tape (Common)
TPM Model10
[MA]
10)
Remove the IFX Board.
IFX Board
TPM Model
10
[MA]
Connector
Mother Board
FPC
Lock Lever
Raise the Mother Board from the front side, and disconnect the FPC (one place). 
*Raise the lock lever to release the lock, and disconnect it in the direction 
of the arrow. 1 2
11)
Screw : 1st,2nd model --- B2
3rd,4th Model --- B410
[MA]
16
[MA]
12)
10
[MA]
3rd,4th Model 

TX Series
Confidential
Mother Board-4
1.MS-1-D.17(b)
10
[MA]
13)
Remove the Mother Board.
Mother Board 

TX Series
Confidential
Shutter/PC Card Connector
1)2)1.MS-1-D.183)
Remove the Shutter.
* The Torsion Spring is removed together with the Shutter.
Lift up the PC Card Assy lightly and take out it from the A portion. Then 
take out the lever and remove the PC Card Assy.
1 2
Shutter
A
Lever
PC Card Assy
Remove the one screw.
Screw: B2
4)Disengage the detent (two places) and remove the PC Card Connector.
PC Card Connector
Torsion Spring
FPC-25 

TX Series
Confidential
WWAN Unit
1)2)1.MS-1-D.18(a)3)
Remove the two screws.
Remove the WWAN Unit.
Peel off the Sheet.
Screw: B3
WAN Model
WWAN Unit
Sheet (BTR)
2[MA] 

TX Series
Confidential
MDL-17 Board
1)2)1.MS-1-D.18(b)3)
Remove the two screws.
Remove the MDL Board.
Remove the Sheet.
Screw: B3
TV ModelSheet (BTR)
5[MA]
MDL Board
Harness 

TX Series
Confidential
CNX-316 Board
1)2)1.MS-1-D.193) 4)
Remove the one screw.
Disconnect the FPC in the direction of the arrow.
Pull out the Harness (RJ-45) from the CNX Board and remove 
the CNX Board. Raise the lock lever to release the lock and disconnect the FPC.
Screw: B5
FPC
Harness (RJ45)
CNX Board
1
2
FPC-27CNX Board
Lock Lever 

TX Series
Confidential
Harness (RJ 45)/FPC-28/Sheet (GPOP) -1
1)1.MS-1-D.203)
Raise the connector portion of the Harness (RJ45) and 
remove the Harness (RJ45).Remove the FPC-28.
Harness (RJ45)
FPC-28Bracket
Remove the two screws, and the Bracket.
FPC-28
Bracket (VGA)
4)
Screw: B10
Rib
FPC-28
Sheet (VGA)
Peel off the Sheet (VGA), While removing the convex portion from
between the FPC-28 and the rib.
Convex
2)
10
[MA]
3rd, 4th Model
16
[MA] 

TX Series
Confidential
Harness (RJ 45)/FPC-28/Sheet (GPOP) -2
5)1.MS-1-D.20(a)
10
[MA]
Remove the Sheet (GPOP).
Sheet (GPOP)
Except WAN Model
2[MA] 

TX Series
Confidential
Sheet
1)2)1.MS-1-D.213) 4)2)
Remove the Sheet (LAN).
Sheet (LAN)
Peel off the Sheet (PR).
Sheet (PR)
Peel off the Sheet (BF).
Sheet (BF)
Peel off the Sheet (Fan).
Sheet (Fan) 

TX Series
Confidential
1)1.MS-1-D.22
Lid (L)Remove the Lid (L).
Remove the Shield Plate.
Shield Plate (BTR)
4)
Lid (L)/Shield Plate-1
10
[MA]
2)
Peel off the Aluminum Sheet (BR).
Aluminum Sheet (BR)
3rd(EU Area) Model10
[MA]
3)
Peel off the Ferrite Sheet (two places).
Ferrite Sheet (B)
10
[MA]
3rd(TV) Model
Fresh Air Intake Area