Sony Vaio Sony Vaio Vgnsz Manual
Have a look at the manual Sony Vaio Sony Vaio Vgnsz Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 30
SZ Series
Confidential
1.MS-1-D.29
Mother Board -1
Pull out the FPC (two places) vertically.
FPC
3) 4)
Peel off the Busteraid (CPU Upper).
Peel off the Tape (Harness).
[ADD]
3
Tape (Harness)
2)
3
[ADD]
Busteraid(CPU Upper)
WAN & EU Area Model4
[MA]
WAN & EU Area (Except SZ1HRP, SZ1XRP )Model
4[COR]
1)
WAN Model4
Peel off the Sheet (FPC EMI).
Sheet (FPC EMI)
[MA]](http://img.usermanuals.tech/thumb/72/48927/w64_sony-vaio-sony-vaio-vgnsz-service-manual-29.png "Page 30
SZ Series
Confidential
1.MS-1-D.29
Mother Board -1
Pull out the FPC (two places) vertically.
FPC
3) 4)
Peel off the Busteraid (CPU Upper).
Peel off the Tape (Harness).
[ADD]
3
Tape (Harness)
2)
3
[ADD]
Busteraid(CPU Upper)
WAN & EU Area Model4
[MA]
WAN & EU Area (Except SZ1HRP, SZ1XRP )Model
4[COR]
1)
WAN Model4
Peel off the Sheet (FPC EMI).
Sheet (FPC EMI)
[MA]")
![Page 31
SZ Series
Confidential
Mother Board -2
1.MS-1-D.305)
Remove the Mother Board.
Mother Board
Harness
Remove the one screw, and disconnect the Harness.
* The screw secures the lug terminal.
Screw:B5
7)6)
8)
FPC
FPC
Lock Lever
B
A
Disconnect the FPC (two places).
*A : Pull out it in the direction of the arrow.B : Raise the lock lever to release the lock, and disconnect the FPC.
Remove the six screws.
Screw:B2
11
[ADD]](http://img.usermanuals.tech/thumb/72/48927/w64_sony-vaio-sony-vaio-vgnsz-service-manual-30.png "Page 31
SZ Series
Confidential
Mother Board -2
1.MS-1-D.305)
Remove the Mother Board.
Mother Board
Harness
Remove the one screw, and disconnect the Harness.
* The screw secures the lug terminal.
Screw:B5
7)6)
8)
FPC
FPC
Lock Lever
B
A
Disconnect the FPC (two places).
*A : Pull out it in the direction of the arrow.B : Raise the lock lever to release the lock, and disconnect the FPC.
Remove the six screws.
Screw:B2
11
[ADD]")
![Page 32
SZ Series
Confidential
WWAN Unit -1
1.MS-1-D.30(a)1) 2)
3) 4)
4
[MA]
WAN Model
Peel off the Filament Tape.Disconnect the FFC vertically, and peel off the A portion
from the Adhesive Tape.
Disconnect the coaxial cable coming from the WAN Antenna (Base Unit).
* Disconnect the coaxial cable vertically.
Filament Tape
FFC
A
FFC
Adhesive Tape (W)
WAN Antenna (Base Unit)
Coaxial Cable
WWAN Unit
Screw: Red-B5 / Blue-B17
Remove the three screws and the WWAN Unit.](http://img.usermanuals.tech/thumb/72/48927/w64_sony-vaio-sony-vaio-vgnsz-service-manual-31.png "Page 32
SZ Series
Confidential
WWAN Unit -1
1.MS-1-D.30(a)1) 2)
3) 4)
4
[MA]
WAN Model
Peel off the Filament Tape.Disconnect the FFC vertically, and peel off the A portion
from the Adhesive Tape.
Disconnect the coaxial cable coming from the WAN Antenna (Base Unit).
* Disconnect the coaxial cable vertically.
Filament Tape
FFC
A
FFC
Adhesive Tape (W)
WAN Antenna (Base Unit)
Coaxial Cable
WWAN Unit
Screw: Red-B5 / Blue-B17
Remove the three screws and the WWAN Unit.")
![Page 33
SZ Series
Confidential
WWAN Unit -2
1.MS-1-D.30(b)5)
4
[MA]
WAN Model
Peel off the Adhesive Tape.
Adhesive Tape (W)
WWAN Unit](http://img.usermanuals.tech/thumb/72/48927/w64_sony-vaio-sony-vaio-vgnsz-service-manual-32.png "Page 33
SZ Series
Confidential
WWAN Unit -2
1.MS-1-D.30(b)5)
4
[MA]
WAN Model
Peel off the Adhesive Tape.
Adhesive Tape (W)
WWAN Unit")
![Page 36
SZ Series
Confidential
CNX-349 Board
1.MS-1-D.33
Remove the two screws.
While removing the connector portion from the Escutcheon (R),
remove the CNX Board.
CNX Board
Connector
Escutcheon (R)
2)
3)
Raise the lock lever to release the lock, and disconnect the FPC.
4)
Lock Lever
FPC
CNX Board
Screw:B5
1)
Peel off the Filament Tape (two places) and the Shield Tape (C).
Filament Tape
Shield Tape (C)
9
[ADD]](http://img.usermanuals.tech/thumb/72/48927/w64_sony-vaio-sony-vaio-vgnsz-service-manual-35.png "Page 36
SZ Series
Confidential
CNX-349 Board
1.MS-1-D.33
Remove the two screws.
While removing the connector portion from the Escutcheon (R),
remove the CNX Board.
CNX Board
Connector
Escutcheon (R)
2)
3)
Raise the lock lever to release the lock, and disconnect the FPC.
4)
Lock Lever
FPC
CNX Board
Screw:B5
1)
Peel off the Filament Tape (two places) and the Shield Tape (C).
Filament Tape
Shield Tape (C)
9
[ADD]")
SZ Series Confidential Mother Board -2 1.MS-1-D.305) Remove the Mother Board. Mother Board Harness Remove the one screw, and disconnect the Harness. * The screw secures the lug terminal. Screw:B5 7)6) 8) FPC FPC Lock Lever B A Disconnect the FPC (two places). *A : Pull out it in the direction of the arrow.B : Raise the lock lever to release the lock, and disconnect the FPC. Remove the six screws. Screw:B2 11 [ADD]
SZ Series Confidential WWAN Unit -1 1.MS-1-D.30(a)1) 2) 3) 4) 4 [MA] WAN Model Peel off the Filament Tape.Disconnect the FFC vertically, and peel off the A portion from the Adhesive Tape. Disconnect the coaxial cable coming from the WAN Antenna (Base Unit). * Disconnect the coaxial cable vertically. Filament Tape FFC A FFC Adhesive Tape (W) WAN Antenna (Base Unit) Coaxial Cable WWAN Unit Screw: Red-B5 / Blue-B17 Remove the three screws and the WWAN Unit.
SZ Series Confidential WWAN Unit -2 1.MS-1-D.30(b)5) 4 [MA] WAN Model Peel off the Adhesive Tape. Adhesive Tape (W) WWAN Unit
SZ Series Confidential FPC, Card (Modem) 1.MS-1-D.31 Remove the two screws, and then the FPC. Pull out the FPC vertically upward, and disconnect it. 1) 2) 3) Remove the two screws, and then the Card (Modem). FPC FPC Card (Modem) 4) Turn over the Card (Modem), and disconnect the Harness. Harness Card (Modem) Screw:B8 Screw:B5
SZ Series Confidential Parts of the Card (Modem) 1.MS-1-D.321) Disconnect the FPC. FPC Card (Modem) Connector
SZ Series Confidential CNX-349 Board 1.MS-1-D.33 Remove the two screws. While removing the connector portion from the Escutcheon (R), remove the CNX Board. CNX Board Connector Escutcheon (R) 2) 3) Raise the lock lever to release the lock, and disconnect the FPC. 4) Lock Lever FPC CNX Board Screw:B5 1) Peel off the Filament Tape (two places) and the Shield Tape (C). Filament Tape Shield Tape (C) 9 [ADD]
SZ Series Confidential Escutcheon (R) 1.MS-1-D.341) Cover (Modem) Pull out the Cover (Modem). Remove the one screw. 2) Remove the Escutcheon (R). 3) Escutcheon (R) Screw:B5
SZ Series Confidential WAN Antenna (Base Unit) 1.MS-1-D.34(a)1) 2) 3) WAN Model Remove the WAN Antenna (Base Unit). *The Adhesive Tape (Cover BATT) is attached on the bottom of it. WAN Antenna (Base Unit) Adhesive Tape (Cover BATT) Escutcheon (R) WAN Antenna (Base Unit) Sub Plate (WAN Antenna)Remove the Sub Plate (WAN Antenna) while disengaging the detent (one place). Detent Disconnect the coaxial cable. * Disconnect the coaxial cable vertically. Coaxial Cable WAN Antenna (Base Unit) 4 [MA]
SZ Series Confidential Harness (DC), Harness (RJ45/11), Cover (Modem) 1.MS-1-D.351) Remove the Harness (DC) by lifting it up vertically. 2) Harness (DC) Remove the Harness (RJ45/11) by lifting it up vertically. Harness (RJ45/11) Cover (Modem) Remove the Cover (Modem). 3) 4) Sheet (DC) Peel off the Sheet (DC). 4 [ADD]
SZ Series Confidential CNX-348 Board 1.MS-1-D.361) 2) Peel off the Gasket, and remove the three screws. Remove the Bracket (Dock-L). Bracket (Dock-L) FPC 3) Pull out the FPC vertically. Remove the CNX Board while removing the connector portion from the Escutcheon (L). Connector Escutcheon (L) CNX Board 4) Gasket Screw: Red-B8 / Blue-B5