Sony Vaio Sony Vaio Vgns Manual

							S Series
Confidential
IFX-311 Board, IFX-331 Board
1)2)1.MS-1-D.113)
Slide the both ends of the lock lever in the arrow direction to 
unlock, and disconnect the FFC. Remove the three screws, and then the IFX-311 Board.
Remove the Harness (RJ-45/11).
FFC
Lock Lever
Remove the one screw, and then the IFX-331 Board.
IFX-331 Board
Screw: B4
Harness (RJ-45/11)
Bluetooth Model
4)
Screw: B4
IFX-311 Board 
						

							S Series
Confidential
Parts of the IFX Board
1)2)1.MS-1-D.123) 4)
Remove the two screws. Remove the Modem Card.
*The Connector is located on the back.
Turn over the IFX-311 Board, and peel off the Sheet. Disconnect the Connector in the arrow direction, 
and remove the Harness (RJ-45/11).
Connector
Harness (RJ-45/11)
Screw: B3
Common
Modem Card
IFX-311 Board
Connector 
						

							S Series
Confidential
1)1.MS-1-D.13
Remove the Bluetooth Module.
*The Connector is located on the back.
*The Coaxial Cable is hooked on the notch.
Parts of the IFX Board
Notch
Bluetooth Model
Connector
Bluetooth Module
2)
Disconnect the Coaxial Cable from the IFX-331 Board and 
the Bluetooth Module respectively.
*Disconnect the Connector vertically.
Bluetooth Module
IFX-331 Board 
						

							S Series
Confidential
CNX-261 Board
1)2)1.MS-1-D.143)
Remove the two screws.Remove the CNX Board.
*The Connector is fitted in the Escutcheon (L).
Disconnect the FFC.
*Pull it off in the arrow direction.
FFC
Screw: B4
CNX Board
Connector
Escutcheon (L ) 
						

							S Series
Confidential
Mother Board -1
1)1)1.MS-1-D.152) 3)
Remove the Cover.
Disconnect the Harness (LCD).
*Pull it off upward. Remove the one screw, and then the Bracket.
Bracket
Screw: B4
Remove the one screw.Screw: B4
Cover
Harness (LCD)
[DEL]6 
						

							S Series
Confidential
4)5)1.MS-1-D.166)
Remove the Mother Board.
*The Connector is fitted in the Escutcheon (R).Turn over the Mother Board, open the tabs outward (arrow 1), and
pull off the Wireless LAN Card diagonally upward (arrow 2).
Mother Board -2
1
1
2
Tab
7)
Remove the one screw, and then the DC Jack.
Screw: B4
Wireless LAN Card
Remove the four screws and the Spacer (MBX) (one location).
*Remove the Spacer (MBX) using the 4 mm socket wrench.
DC Jack
Screw: B4
Spacer (MBX)
Mother Board
Escutcheon (R) 
						

							S Series
Confidential
LCD Section
1)1.MS-1-D.17
Remove the four screws, and then the LCD Section upward.Screw: B4
LCD Section 
						

							S Series
Confidential
Parts of the Housing (Bottom)
1)1.MS-1-D.18
Remove the one Escutcheon (R).
Escutcheon (R)
2)
3)
Remove the one Escutcheon (L).
Escutcheon (L)
Remove the one screw.and then the Cover.
Screw: B4
Cover
4)
Remove the one Cover.
Cover
6[DEL]
6[DEL] 
						

							S Series
Confidential
Parts of the Escutcheon (L/R)
1)1.MS-1-D.19
Remove the Cover from the Escutcheon (L).
2)
3)
Remove the Kenjington from the Escutcheon (L).
Remove the Cover from the Escutcheon (R).
Cover
Cover
Escutcheon (R)
Escutcheon (L)
Kenjington 
						

							S Series
Confidential
Update History
Date
Contents
Version No.
[ADD ]---Addition   [ DEL]---Deletion   [ CHG]---Change   [ COR]---Correction   [ MA]---Model Addition
1
2004.09.17
[MA] (Page 3)
2.00
6
2005.01.06
[DEL] Parts (Page 15,18)
3.00