Sony Vaio Sony Vaio Vgnfs Manual

							1
Table of contents 
SectionTitle Page
1Disassembly Procedures Outline 
  Fixture for disassembly 2
  Disassembly procedure flow chart 3
2Disassembly components 
 Disassembly battery 5
 Disassembly RAM 5
 Disassembly HDD 6
 Disassembly keyboard 7
  Disassembly K/B cover 7
 Disassembly LCD ASSY 9
 Disassembly Bottom 10
 Disassembly ODD 10
 Disassembly ASSY Thermal CPU 11 
 Disassembly CPU 11 
 Disassembly Thermal VGA 12
  Disassembly W-LAN moudle 12
 Disassembly PWA-ANTENNA 12
 Disassembly Motherboard 13
    
    
    
VGN-FSxx series Disassemble Instruction 
						

							2
Fixture needed for Disassembly 
      
    Station  Wrench power  Screw model  Amount 
CPU FAN  1.8±0.2kgf.cm  M2*L5 4
DC-IN BRACKET  1.8±0.2kgf.cm  M2*L5 1
VGA 1.8±0.2kgf.cm M2*L5 4
ODD 1.8±0.2kgf.cm M2*L5 3
Antenna board  1.8±0.2kgf.cm  M2*L5 1
LCD Bezel  2.5±0.2kgf.cm  M2*L5 10
BOTTOM 1.8±0.2kgf.cm M2*L7 13
LCD 4.0±0.2kgf.cm M3*L6 4
K/B 1.8±0.2kgf.cm M2*L3 4
HDD 1.8±0.2kgf.cm M2*L7 4
HDD&RAM DOOR  1.8±0.2kgf.cm  M2*L7 2
VGN-FSxx series Disassemble Instruction 
						

							3
Disassemble 
Battery & RAM   Disassemble 
HDDDisassemble Keyboard
& K/B Cover 
Disassemble 
BOTTOM Disassemble  
ODD       
Disassemble 
W-LAN module Disassemble  
Thermal VGA 
Disassemble  
MotherboardDisassemble 
PWA-ANTENNA 
Disassemble ASSY 
Thermal CPU&CPU
Disassemble 
LCD ASSY 
VGN-FSxx series Disassemble
FLOW CHART  
						

							4
                                
Step 2. Using a screwdriver, remove 
the marked screw.Step 3. Remove memory access door in the direction of the arrow and set aside. 
Step 1.To prevent any kind of cosmetic damages and scratches; place your PC upside down on top of a soft surface. 
Remove the battery in the direction of the arrow and set aside. 
Step 4. Unlock the memory socket remove it in the direction of the arrow and set aside. 
VGN-FSxx series Disassemble instructions 
1. Remove the battery 
2. Disassemble the RAM door and RAM  
						

							5
VGN-FSxx series Disassemble instructions 
Disassemble the HDD door and HDD 
Step 5. Using a screwdriver, remove 
the marked screw .Step 6. Remove hard drive access door in the direction of the arrow and set aside. 
Step 7. Using a screwdriver remove 
the marked screw.Step 8. Gently pull out HDD in the direction of the arrow and set aside.  
						

							6
          
Step 9. Using a screwdriver remove 
the marked screw. Step 10. Remove the KBCOVER in the direction of arrow and set aside. 
Step 11. Using a screwdriver remove 
the marked screw. 
VGN-FSxx series Disassemble instructions 
Disassemble the K/B cover and keyboard 
Step 12. Remove the keyboard in the 
direction of arrow. 
Step 13. Gently pull out the keyboard 
data cable. Step 14. Remove the keyboard data cable in the direction of arrow and set aside.  
						

							7
Step 15.Gently Pull out the black and white 
cable. 
Step 17. Using a screwdriver remove the marked screw.
VGN-FSxx series Disassemble instructions 
Disassemble the LCD ASSY 
Step 16.Gently Pull out the LCD cable. 
Step 18. Gently remove the LCD in the direction of arrow and set aside.  
						

							8
VGN-FSxx series Disassemble instructions 
Disassemble the LCD ASSY 
Step 19.Gently remove the LCD rubber round, using a screwdriver remove the marked screw. 
Step 20. Gently remove the LCD bezel. Steps 21.Using a screwdriver remove the 
marked screw
.
Step 22.Gently pull out the connecter of the 
inverter as show. Step 23. Gently remove the LCD.    
						

							9
Step 26. Gently remove the bottom. Step 25. Using a screwdriver remove the 
marked screw. 
Step 24. Remove the cover thermal outlet in the direction of arrow and set aside. 
VGN-FSxx series Disassemble instructions 
1. Disassemble the BOTTOM 
2. Disassemble the ODD 
Step 27. Using a screwdriver remove the 
marked screw. Step 28. Gently remove the ODD in the 
direction of arrow.  
						

							10
VGN-FSxx series Disassemble instructions 
Disassemble the ASSY Thermal CPU and 
CPU
Step 29. Gently remove the ASSY 
Thermal CPU cable. Step 30. Using a screwdriver remove 
the marked screw. 
Step 31. Gently remove the DC IN 
cable. Step 32. Gently remove the ASSY Thermal CPU. 
Step 33. Unlock the CPU socket as 
show. Step 34. Gently remove the CPU.