Sony Vaio Sony Vaio Vgn Ux Manual

UX Series
Confidential
Chapter 1. Disassembly & Assembly Guide
1.MS-1-D.1
1-3. Disassembly & Assembly
- Main Section -
MS-1  Main Section Disassembly
Except 1seg Tuner / Wireless WAN Model
[MA]
2 

UX Series
Confidential
Battery Pack
1)2)1.MS-1-D.2
In the state of 1), remove the Battery Pack in the direction of the arrow.
Turn over the main unit, and slide the lever in the direction of
the arrow to release the lock.
Lever
Battery Pack
Battery Pack 

UX Series
Confidential
Cap (Stick Pointer)
1)1.MS-1-D.3
Remove the Cap.
RemarkShape of the Cap
* There are two kinds of Cap for J Model.
When replacing the Cap, be sure to use the Cap of the same 
shape and color as one used in the repair set.
Cap(Stick Pointer)[MA]3
CModel
JModel
[MA]
3
Cap (Stick Pointer) 

UX Series
Confidential
Dummy Card, Stylus
1)1.MS-1-D.3(a)
Remove the Dummy Card.Turn over the main unit and remove the Stylus.
Dummy Card
Stylus
[MA]
3
2) 

UX Series
Confidential
Housing (Bottom)
1)2)1.MS-1-D.4
While disengaging the detent (two places), remove the Cover. Remove the six screws.
Remove the Housing.
3)
Screw: 
Blue-B6 / Green-B7 /Red-B8
Cover (Bottom Screw)
Housing (Bottom) 

UX Series
Confidential
Parts of the Housing (Bottom)
1)1.MS-1-D.5
Remove the two screws.
Screw: B1
2)
While disengaging the detent (three places), remove the Cover.
Cover (Bottom)
3)
[ADD]
1
Screw: B1
Remove the one screw. 

UX Series
Confidential
Attachment
1.MS-1-D.6
Peel off the Sheet.
*HDD Model - Two placesFlash Memory Model - One place
HDD Model
Sheet(Bottom)
1)
2)
Peel off the Tape.
*HDD Model - Tape ( one place), Kapton Tape(One place)
Flash Memory Model -Tape (Two places)
HDD Model
Flash Memory Model
Tape(Harness)
Tape(Harness)
Tape(Harness)
[ADD]
4
Flash Memory Model
[ADD]
4
Kapton Tape 

UX Series
Confidential
Wireless LAN Card
1)1.MS-1-D.7
Screw: B4
Remove the one screw and then the Wireless LAN Card.
Wireless LAN Card
2)
Disconnect the Antenna (one place) and the terminal of the Coaxial 
Cable (two places)  vertically.
Coaxial Cable [COR]
2
Antenna(2.4/5GHz For Right) 

UX Series
Confidential
HDD
1)1.MS-1-D.82)
Remove the five screws and the Bracket.
HDD1. Raise the lock lever and release the lock. 
2. While disconnecting the FPC, remove the HDD.
Lock Lever
FPCScrew: B1Bracket (HDD)
HDD Model
[MA]
3 

UX Series
Confidential
Parts of the HDD
1)1.MS-1-D.9
HDD
Cushion (HDD)Remove the Cushion (two places).
HDD Model
[MA]
3