Sony Vaio Sony Vaio Vgn Ar Manual
Here you can view all the pages of manual Sony Vaio Sony Vaio Vgn Ar Manual. The Sony manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 11
11
VGN-ARxx Series Disassemble Instructions
1. LCD
2. Speaker
3. Camera
Step 28. Gently remove the LCD and set aside.
Step 32. Use a screwdriver to remove the marked
two screws.
Step 29. Use a screwdriver to remove the
marked six screws.
Step 30. Gently remove the Speakers.
Step 31. Remove the marked cable.
Page 12
12
VGN-ARxx Series Disassemble Instructions
1. Bottom
Step 33. Remove twelve screws from the Bottom Housing.
Note: This screw underneath the HDD door is
significantly shorter than the other screws
securing the Bottom Housing.
Step 34.Remove the Bottom Housing.
Page 13
13
Step 35. Remove the marked two cables. Use
a screwdriver to remove the marked two
screws.
VGN-ARxx Series Disassemble Instructions
1. TV card
Step 36. There are three types of TV card
as follows.
Step 36-1. This is TV card for JP.
Step 36-2. This is TV card for EU.
Step 36-2. This is TV card for US.
Page 14
14
VGN-ARxx Series Disassemble Instructions
1.AUDIO BOARD
Step 37. Remove the Audio Board.
Step 38. Use a screwdriver to
remove the marked screw.
Step 39. Lift the Audio Board up and
to the left.
Step 40. Disconnect the Audio
Harness as shown.
Page 15
15
VGN-ARxx Series Disassemble Instructions
1.
AUDIO HARNESS
2.
VIDEO HEAT SINK
Step 41. Remove the VIDEO HEAT SINK and Cooling Unit.
Step 42. Remove the AUDIO HARNESS.
Note the routing of the cable.
Step 43. Use a screwdriver to remove the marked
two screws, then lift the VIDEO HEAT SINK up.
Page 16
16
VGN-ARxx Series Disassemble Instructions
1. HDD Power Board Harness
2. Bluetooth Module
3.
Cooling Unit
Step 44. Remove the HDD Power Board
Harness.
Step 45. Use a screwdriver to remove the marked
screw, then remove the Bluetooth Module.
Step 46. Use a screwdriver to remove the marked
four screws.
Step 47. Remove the Cooling Unit Cover.
Step 49. Use a screwdriver to rotate...
Page 17
17
VGN-ARxx Series Disassemble Instructions
1.
RJ-45/RJ-11 HARNESS
2.
Power Switch Board cable
Step 50. Remove the RJ-45/RJ-11 Harness, Power Switch cable, Microphone cable, TOUCHPAD cable and DC JACK
Harness.
Step 51. Lift the RJ-45/RJ-11 HARNESS up.
Step 52. Disconnect the Power Switch Board
cable.
Page 18
18
VGN-ARxx Series Disassemble Instructions
1. Microphone cable and TOUCHPAD cable
2. DC JACK HARNESS
3. IR Board HARNESS
Step 53. Disconnect the Microphone cable.
Note the routing of the DC Jack Harness.
Step 55. Disconnect the DC JACK HARNESS.
Step 54. Disconnect the TOUCHPAD cable.
Step 56. Disconnect the IR Board HARNESS.
Page 19
19
VGN-ARxx Series Disassemble Instructions
1. Mother Board
Step 57. Remove the Mother Board.
Step 58.Use a screwdriver to remove the
marked screw.
Step 59.Lift the Mother Board up from the
right side and remove to the right.
Page 20
20
VGN-ARxx Series Disassemble Instructions
1. AV Function Board
2. Power Switch Board
Step 60. Remove the AV Function Board, Power Switch Board, FeliCa module, LED Board, IR Board, TOUCHPAD
Board, RF and DC JACK HARNESS.
Step 61.Use a screwdriver to remove the marked
two screws. Then, remove the AV Function Board.
Step 62.Use a screwdriver to remove the marked
three screws. Then,...