Sony STRDH550 User Manual

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Connecting devices with HDMI jacks
Connect  devices to the receiver as illustrated below.
Before  connecting cables, be sure  to disconnect the AC power  cord  (mains  lead).
If your  device does not have an HDMI jack, see “ Connecting devices with jacks other than  HDMI jacks .”
 HDMI cable (not supplied)  
Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
  Satellite tuner, cable TV tuner
 PlayStation3
 DVD recorder
 Blu-ray  Disc...

Related TopicNotes on connecting cables
Using  HDMI  connections
Changing the  name for  each  input  (Name In )
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
65  

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Connecting devices with jacks  other  than  HDMI jacks
Connect  devices to the receiver as illustrated below. 
The  solid lines show recommended connections and the dashed lines show alternative connections.
Be  sure  to disconnect the AC power  cord  (mains  lead)  before connecting cables.
  Optical digital  cable (not supplied)
 Audio cable (not supplied)
 Video  cable (not supplied)
 Coaxial digital  cable (not supplied)
Help Guide
66  

Related TopicNotes on connecting cables
Changing the  name for  each  input  (Name In )
Using  other video/audio input  jacks (Audio  Input Assign )
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
67  

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Connecting an iPhone, iPod,  or USB device
Connect  an iPhone, iPod  or USB device as illustrated below.
  USB cable (not supplied)
 iPhone, iPod,  or USB device
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
68  

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Connecting an MHL-compatible mobile  device
Connect  an MHL-compatible mobile  device as illustrated below.
This receiver supports MHL 2 technology.
  Mobile device  
 MHL cable (not supplied)  
Use an MHL 2-compliant cable.
Sony recommends that you use an MHL cable made  by Sony.
 MHL Direct Attach Device
Related Topic
Using  MHL (Mobile High- Definition  Link)  connections
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
69  

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Connecting the antennas (aerials)
Connect  the supplied  antennas (aerials) to the receiver as illustrated below.
Be  sure  to disconnect the AC power  cord  (mains  lead)  before connecting the antennas (aerials).
 FM  wire  antenna (aerial) (supplied)
 AM loop antenna (aerial) (supplied)
Note
To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices.
Be  sure  to fully extend  the FM  wire antenna (aerial).
After...

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Setting the voltage selector
If your  receiver has a voltage  selector  on the rear panel,  check that the voltage  selector  is  set to the local
power  supply voltage.  If not, use a screwdriver to set the selector  to the correct position  before connecting the
AC power  cord  (mains  lead)  to a wall  outlet.
The  voltage  selector  may differ  depending on the area.
Notes on use
4 -488 -933 -11(1)
Copyright  2014 Sony  Corporation
Help Guide
71  

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Inserting batteries into  the remote control
Insert  two R03 (size AAA) batteries (supplied) into the remote control. Make  sure  that the +  and - ends are  in
the correct position  when installing batteries.
Note
Do not leave the remote control  in an extremely hot or humid  place.
Do not use a new battery with an old one.
Do not mix manganese  batteries with other kinds of batteries.
Do not expose  the remote control  sensor  to direct  sunlight  or...

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Turning on the receiver
When you have made  all  connections with the other devices, connect  the AC power  cord  (mains  lead),  then
turn  on the receiver. 1.  Connect  the AC power  cord  (mains  lead)  to a wall  outlet.
2.  Press  (on/standby) to turn  on the receiver.
You can also turn  on the receiver using  (on/standby) on the remote control. To turn  off the receiver,
press  
 (on/standby) again.
Note
After you turn  off the receiver, [ STANDBY]...