Sony Srsx5 User Guide

Personal  Audio  System
SRS-X5
Enjoying the surround  effects
You can select the surround  effects  with the SOUND button. 1.  Tap  the SOUND button to select the surround  effect.
The  SOUND indicator shows the current surround  effect  setting.  Each time you tap the SOUND button, the selected
effect  switches.
Indications of the SOUND indicator
Off
You can enjoy Clear Audio+ mode  (Sony-recommended sound  quality).  This mode  is  set as the default  setting.
Lights up (white)
You can enjoy the...

Notes on use
4 -534 -948 -11(1)
Copyright  2014 Sony  Corporation
72  

Personal  Audio  System
SRS-X5
Receiving a call
You can enjoy a hands -free  call  with a BLUETOOTH mobile  phone that supports the BLUETOOTH profile  HFP (Hands -
free  Profile) or HSP (Headset Profile),  via a BLUETOOTH connection.
If your  BLUETOOTH mobile  phone supports both  HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile  phone. Refer  to the operating instructions supplied  with
your  mobile  phone.
About ring tone
When an incoming  call  arrives, a ring tone...

3.  Tap  the VOL  (volume) -/+  buttons to adjust the volume.
When you tap the VOL  (volume) -/+  buttons, the  (power) indicator flashes once in green.
When you tap the VOL  (volume) –/+ buttons at the lowest or highest  level, the 
 (power) indicator flashes three
times in green.
4 .  To end a call, press  the  (call) button.
If you were listening to music when the call  arrived, playback  will be resumed when the call  ends.
Hint
Some BLUETOOTH mobile  phones have handset use priority  when receiving...

Personal  Audio  System
SRS-X5
Making a call
You can enjoy a hands -free  call  with a BLUETOOTH mobile  phone that supports the BLUETOOTH profile  HFP (Hands -
free  Profile) or HSP (Headset Profile),  via a BLUETOOTH connection.
If your  BLUETOOTH mobile  phone supports both  HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile  phone. Refer  to the operating instructions supplied  with
your  mobile  phone.
1 .  Connect  the speaker with a BLUETOOTH mobile  phone.
The...

4.  To end a call, press  the  (call) button.
If you were listening to music when you made  the call, playback  will be resumed when the call  ends.
Hint
If you adjust the volume  on the speaker when not talking, the playback  volume  is  adjusted.
If the caller cannot  hear  or can barely  hear  your  voice, talk more directly into the microphone  of the speaker.
During  a call, tap the VOL  (volume) -/+  buttons on the speaker to adjust the volume.  In the speaker, the volume  of
music playback  and...

Personal  Audio  System
SRS-X5
Button functions  for a phone call
The  available  functions  may vary depending on the profile  supported  by your  BLUETOOTH mobile  phone. Even if the
profile  is  the same,  functions  may vary depending on the BLUETOOTH mobile  phone.
Refer  to the manual supplied  with your  BLUETOOTH mobile  phone.
Standby
Press the  (call) button once to start  voice-dial (voice-dial compatible mobile  phones only).
Press and hold the  (call) button for about  2 seconds  to redial...

Personal  Audio  System
SRS-X5
Making a call while  playing back music  (Multi point connection)
Since  the speaker is  compatible with the multi point connection function, you can receive  an incoming  call  to another
BLUETOOTH mobile  phone connected to the speaker, even while listening to music played  from a BLUETOOTH music
player  connected to the speaker.
When making  an outgoing call  by the phone, or an incoming  call  arrives  to the phone, playback  pauses  and the dial tone
or ring tone  is...

To reconnect the speaker to the same  2 devices, repeat the connection procedure  above.
Related TopicHow  to make wireless connection with  BLUETOOTH devices
Notes on use
4 -534 -948 -11(1)
Copyright  2014 Sony  Corporation
79  

Personal  Audio  System
SRS-X5
Specifications
Speaker section
Speaker  system
Satellite speaker: Approx.  38 mm (1 1/2 in) dia. ×  2
Subwoofer: Approx.  58 mm (2 3/8 in) dia. ×  1
Enclosure  type
Satellite speaker: Sealed enclosure
Subwoofer: Passive  radiator model
Amplifier  section
Reference output power
Using AC adaptor: 5 W  +  5 W  (Satellite speaker, at 1 % harmonic distortion, 1 kHz, 6 Ω)  10 W  (Subwoofer, at 1 %
harmonic distortion, 100 Hz, 4 Ω)
Using battery: 1 W  +  1 W  (Satellite speaker,...