Sony Smartwatch 2 User Manual

							To disable the screen unlock PIN
1 From the Home screen, find and tap 
.
2 Find and tap  Security > None .
3 Enter your PIN, then tap 
.
Resetting and restarting
You can reset your SmartWatch 2 to its factory default settings. This deletes all personal data on your SmartWatch 2. This action is sometimes necessary if your
SmartWatch 2 stops functioning properly.
You can also force your SmartWatch 2 to shut down in situations where it hangs or
won't restart normally. When you restart your SmartWatch 2 after forcing it to shut
down, no settings or personal data is deleted.
To perform a factory data reset
1 From the Home screen, find and tap 
.
2 Find and tap  Reset SmartWatch 2 .
3 To confirm, tap 
.
To force your SmartWatch 2 to shut down
• Press and hold down 
 until your SmartWatch 2 turns off.
11This is an Internet version of this publication. © Print only for private use. 
						

							Using your SmartWatch 2
Viewing event notifications Once you have installed the relevant applications for your SmartWatch 2, you can
receive notifications on your SmartWatch 2 from various applications. When a
notification arrives, SmartWatch 2 vibrates and the application appears on the
screen. If SmartWatch 2 is disconnected from your Android™ device, you can only
view notifications which are received before disconnecting. See  Adding features to
your SmartWatch 2  on page 6.
You can receive the following kinds of notifications from your Android™ device on
the screen of your SmartWatch 2:
• Missed calls
• Text messages
• Email
• Updates from social networking services, such as Facebook™ and Twitter™
• Calendar event reminders
• Gmail
• RSSFor some applications, such as Facebook™, you have to first log in to the service in the
SmartWatch 2 application on your Android™ device.
To view an event notification
• When a notification arrives, tap the application icon on the Home screen.
Calling When you are using a wireless Bluetooth ®
 headset, you can use SmartWatch 2 as a
remote to make or receive calls in an easy way. To make calls from your
SmartWatch 2, you must install the Call application for SmartWatch 2. See  Adding
features to your SmartWatch 2  on page 6.
You can make a call from your SmartWatch 2 by manually dialling a phone number,
by tapping a number saved in your contact list, or by tapping the phone number in
your call log view.
To make a call by dialling
1 From the Home screen, find and tap 
.
2 Tap 
.
3 Enter the number of the recipient and tap 
.
To make a call from the Contacts
1 From the Home screen, find and tap 
.
2 Tap 
.
3 Tap the first letter of the name of the contact.
4 Find and tap the contact.
5 Tap 
.
Receiving calls To answer a call
• Tap 
.
To decline a call
• Tap 
.
To mute a call
• Tap 
.
12This is an Internet version of this publication. © Print only for private use.  
						

							To reject a call with a predefined message
1 When a call arrives, tap  Reject with message.
2 Select a message, then tap 
.
Ongoing calls To change the ear speaker volume during a call
• Tap 
 or .
Using the call log
You can use the call log 
 to check your missed, received and dialled calls, and to
call the listed numbers directly.
Call log icons
Missed callReceived callDialled call
To view your call log
1 From the Home screen, find and tap 
.
2 Tap 
.
To call a number from your call log
1 From the Home screen, find and tap 
.
2 Tap 
, then select the number that you want to call.
3 Tap 
 > .
Messaging
To read your text messages on your SmartWatch 2, you need to install the
Messaging application for SmartWatch 2. See  Adding features to your SmartWatch 2
on page 6. You can also use SmartWatch 2 to initiate a call to the sender, or to reply
with a predefined message or emoticons.
To reply to a message
1 From the Home screen, find and tap 
.
2 Tap the message that you want to reply.
3 Tap 
 > .
4 Tap 
 and select a predefined message, or tap  and select a smiley.
5 To send the message, tap 
.
In step 2 and 3, you can also touch and hold the message in the list, then tap .
To call a message sender
1 From the Home screen, find and tap 
.
2 Tap the message that you want to reply with a call.
3 Tap 
 > .
Music
Once you've installed the Music application for your SmartWatch 2, you can use
SmartWatch 2 to control most music player applications in different Android™
devices. See  Adding features to your SmartWatch 2  on page 6.
13This is an Internet version of this publication. © Print only for private use.  
						

							To play a song
1 From the Home screen on your SmartWatch 2, find and tap 
.
2 Tap 
.
To adjust the audio volume
• When music is playing, tap 
 or .
To move between tracks
• Swipe left or right.
14This is an Internet version of this publication. © Print only for private use. 
						

							Support and maintenanceUpdating your SmartWatch 2
Update your SmartWatch 2 to the most recent software version to get optimal
performance and the latest enhancements.
To update your SmartWatch 2
• Tap  Update  when a window appears on your Android™ device asking you to
update your SmartWatch 2 to the latest software version.To save data costs, make sure that your Android™ device is connected to a Wi-Fi® network.
Support website
To view the support website from your Android™ device
1 From the Home screen on your SmartWatch 2, find and tap 
.
2 Find and tap  Support > Support site . The support website is opened on your
Android™ device.
15This is an Internet version of this publication. © Print only for private use.  
						

							Important informationProtecting your SmartWatch 2 from water
To maximise the water resistance of your SmartWatch 2, the cover for the micro USB
port must be firmly closed.
Avoid exposing your SmartWatch 2 to environments with excessive dust or moisture. Normal wear and tear along with damage to your SmartWatch 2 can reduce its ability
to resist dust or moisture.
Do not use your SmartWatch 2 in the following conditions:Swimming poolDivingSalt waterOther liquid
chemicalsSand/mud
Your SmartWatch 2 is waterproof and dust resistant in compliance with the Ingress
Protection ratings IP57 (see details below). Always firmly attach the micro USB port
cover to ensure the water and dust resistance of the device. If liquid is detected
inside the device, for example, underneath the cover, your warranty will be void.
Never submerge your device in salt water or let the micro USB port come in contact
with salt water. Also, never expose the device to any liquid chemicals, or to moist
environments with extreme high or low temperatures. The waterproof ability of the
micro USB port is not guaranteed in all environments or conditions. After using the
device in water, dry off the areas around the micro USB port cover.
All compatible accessories, including chargers and micro USB cables, are not
waterproof and dust resistant on their own.
Your warranty does not cover damage or defects caused by abuse or improper use
of your device. If you have any further questions about the use of your products, refer
to our Customer support service for help.
IP (Ingress Protection) rating
Your SmartWatch 2 has an IP rating, which means it has undergone certified tests to
measure its resistance levels to both dust and water. The first digit in the two-digit IP
rating indicates the level of protection against solid objects, including dust. The
second digit indicates how resistant the device is to water. The higher the numbers,
the higher the respective protection.
Your SmartWatch 2 is waterproof and dust resistant in compliance with the Ingress
Protection ratings IP57 (see details below). These ratings mean that your device is
dust resistant and is protected against the effects of submersion. You can therefore
use the device in dusty environments, when your fingers are wet, and in extreme
weather conditions, for example, when it’s snowing or raining, or when humidity
levels are high. See the table below for more details.
Resistance to solid objects and dustResistance to waterIP0X. No special protectionIPX0. No special protectionIP1X. Protected against solid objects > 50 mm in
diameterIPX1. Protected against dripping waterIP2X. Protected against solid objects > 12.5 mm in
diameterIPX2. Protected against dripping water when tilted
up to 15 degrees from normal positionIP3X. Protected against solid objects > 2.5 mm in diameterIPX3. Protected against spraying water16This is an Internet version of this publication. © Print only for private use. 
						

							IP4X. Protected against solid objects > 1 mm in
diameterIPX4. Protected against splashing waterIP5X. Protected against dust; limited ingress (no
harmful deposit)IPX5. Protected against water jet sprayIP6X. Dust tightIPX6. Protected against heavy jet spray IPX7. Protected against the effects of immersion IPX8. Protected against submersion
Legal information
Sony SW2 Prior to use, please read the  Important information leaflet separately provided.
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
All rights reserved.
©Sony Mobile Communications AB, 2013
Publication number:  1277-5616.1
Interoperability and compatibility among Bluetooth ®
 devices varies. Device generally supports products
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the
Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All rights reserved.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of
their respective owners.
Visit  www.sonymobile.com  for more information.
All illustrations are for illustration only and may not accurately depict the actual accessory.
Declaration of Conformity for SW2
We,  Sony Mobile Communications AB  of
Nya Vattentornet
SE-221 88 Lund, Sweden declare under our sole responsibility that our product
Sony type RD-0050
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards  EN 300 328:V1.7.1, EN 301 489-17:V2.1.1,
EN 301 489-3:V1.4.1 and EN 60 950-1:2006 +A11:2009+A1:2010  following the
provisions of, Radio Equipment and Telecommunication Terminal Equipment
directive  1999/5/EC .
Lund, July 2013
Anders Grynge
Director, Head of Global Type Approval
We fulfil the requirements of the R&TTE Directive (1999/5/EC).
17This is an Internet version of this publication. © Print only for private use. 
						

							FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate theequipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) thisdevice must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.18This is an Internet version of this publication. © Print only for private use.