Sony Rht G550 Operating Instructions

4-121-123-11(1)
Theatre Stand System
©2009 Sony Corporation
Operating Instructions
RHT-G550
 

2GB
3
Do not install the appliance in a confined space, such as 
a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the ventilation 
opening of the apparatus with newspapers, tablecloths, 
curtains, etc. Do not place the naked flame sources such 
as lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not 
expose this apparatus to dripping or splashing, and do 
not place objects filled with liquids, such as vases, on 
the apparatus.
Do not expose...

3GB
WARNING ..............................................4
CAUTION................................................5
Precautions ...............................................6
Main features ...........................................7
Getting Started
Supplied accessories ................................8
Setting this stand ......................................9
Connecting components with HDMI 
jacks .................................................13
Connecting components without HDMI 
jacks...

4GB
Do not lean on or hang from the 
TV when the TV is placed on the 
stand.
The TV may fall from the 
stand causing an accident 
resulting in serious injury or 
death.
Do not move the 
stand with the TV or other 
equipment installed on it.
Be sure to remove 
the TV and other 
equipment when 
moving the stand. If 
you fail to do so, the 
stand may lose 
balance and topple 
over resulting in serious injury.
Do not allow the AC power cord 
(mains lead) or the connecting 
cable to be pinched between the 
TV...

5GB
Do not place any heated objects 
such as a hot pan or a kettle on 
the stand. 
It may cause damage to the 
stand.
Do not step on the 
stand.
You may fall and 
cause injury.
This stand is only for the 
specified TV.
Confirm whether this stand is mentioned as a 
supported product in the operating instructions 
of the TV.
Note on load capacity
Do not place any equipment exceeding the 
specified maximum weight on the stand, as 
indicated in the illustration below. Otherwise, it 
may fall or break.
Notes...

6GB
On safety
 Do not place unspecified objects, such as a flower 
vase or pottery on the stand.
 Do not make alterations to the stand.
 Should any solid object or liquid fall into the stand, 
unplug the stand and have it checked by qualified 
personnel before operating it any further.
On power sources
 Before operating the stand, check that the operating 
voltage is identical to your local power supply. The 
operating voltage is indicated on the nameplate at the 
rear of the stand.
 The stand is not...

7GB
Main features
BEasy connection with HDMI
b
The cords are all tangled up. Neat connections (page 13).
BEasy operation with only one TV remote (“BRAVIA” Sync)
b
Separate remotes for each component. Consolidate operations on one remote 
(page 32).
BEasy Surround settings
b
I need lots of cords and speakers. Easy set-up with S-Force PRO Front 
Surround.
About S-Force PRO Front Surround
Sony’s long-term involvement in surround 
technology (and the vast amounts of acoustic data 
accumulated as a result)...

8GB
Please check the following accessories in the 
package.
Optical cable (1)
Remote commander (RM-ANU032) (1)
Size AA (R6) batteries (2)
Cable tie (1)
Shelf board (1)
Shelf support pins (4)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Operating Instructions (1)
Inserting batteries into the 
remote
You can control the stand using the supplied 
remote. Insert two size AA (R6) batteries by 
matching the + and – ends on the batteries to the 
markings inside the compartment.
 Do not leave the...

9GB
Getting Started
About the installation position
Install the stand after connecting all the 
components to the stand.
Install the stand after allowing for a space of 
more than 5 cm from the wall. This is to allow 
for heat dissipation and to prevent the TV from 
falling.
The stand has a back corner cut to fit in the 
corner of a room. If you install the stand in a 
corner of your room, it requires a space of about 
77 cm from the corner of the room to the front of 
the stand.
 Be careful not to pinch...

10GB
Installing the shelf board
1Insert the attaching shelf support pins 
(supplied) into the four holes in the 
stand squarely.
You can set the position where the shelf 
board is to be installed at three different 
heights.
2Install the shelf board with its four 
notches resting on the support pins.
The beveled edge of the shelf board should 
face the front.
 Be careful not to pinch your hand when installing the 
shelf board.
Connecting the AM loop 
antenna (aerial)
The shape and the length of the...