Sony Rht G500 Operating Instructions
Here you can view all the pages of manual Sony Rht G500 Operating Instructions. The Sony manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 31
31GB Advanced Settings Changing the brightness of the front panel display (DIMMER) The brightness of the front panel display can be set to one of 2 levels. 1Press AMP MENU. 2Press X/x repeatedly until “DIMMER” appears, then press or c. 3Press X/x to select the brightness of the front panel display. OFF: Bright lighting. ON: Low lighting. 4Press AMP MENU. The AMP menu turns off. Changing the display setting (DISPLAY) You can change the display setting. 1Press AMP MENU. 2Press x/X repeatedly...
Page 32
32GB Using the sleep timer (SLEEP) You can set the system to turn off at a preset time when you sleep listening to music. You can preset the time in 10 minutes decrements. 1Press AMP MENU. 2Press x/X repeatedly until “SLEEP” appears, then press or c. 3Press x/X to select the preset time. The minutes display (the remaining time) changes as follows: 4Press AMP MENU. The AMP menu turns off. This function is only for this system, not for the connected TV or other components. Note VOLUME MUTINGALBUM...
Page 33
33GB Additional Information If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. When bringing the system in for repairs, be sure to bring in the entire system. General The power is not turned on. Check that the AC power cord (mains lead) is connected securely. If “PROTECTOR” and “PUSH POWER” appears alternately in the front...
Page 34
34GB There is no picture on the TV screen. Check that the TV is selected correctly. Set the TV to the appropriate input mode. Control for HDMI The Control for HDMI function does not work. Check the HDMI connection (page 10). Make sure “CTRL: HDMI” is set to “ON” in AMP menu. Make sure the connected component is compatible with the Control for HDMI function. Check the Control for HDMI settings on the connected component. Refer to the operating instructions supplied with the connected...
Page 35
35GB Additional Information If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the system for the operation. 1Press ?/1 to turn on the power. 2Press INPUT SELECTOR, VOLUME – and ?/1 at the same time. “COLD RESET” appears and the system is reset. AMP menu, sound field etc., return to the default settings. Specifications Dimensions: mm (approx.)A1,010 B400 C550 Mass: kg 43 continued
Page 36
36GB Formats supported by this stand Digital input formats supported by this system are as follows. * Linear PCM accepts sampling frequencies of no more than 48 kHz. Amplifier section Reference Output Power Surround mode Front: 50 Watts/ch (8 ohms at 1 kHz, THD 10 %) Center*: 50 Watts/ch (8 ohms at 1 kHz, THD 10 %) Subwoofer: 100 Watts/ch (4 ohms at 100 Hz, THD 10 %) * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) TV Impedance: 30 kohms...
Page 37
37GB Additional Information Supplied accessories Optical cable (1.5 m) (1) Remote commander (RM-ANU041) (1) Size AA (R6) batteries (2) Support belt and two screws (small/large) (1) Shelf board (1) Shelf support pins (4) Operating Instructions (1) Design and specifications are subject to change without notice. Standby power consumption 0.3 W. Halogenated flame retardants are not used in the printed wiring boards. Over 85 % power efficiency of amplifier block is achieved with the full digital...
Page 38
38GB PCM (Pulse Code Modulation) A method of converting analog audio to digital audio for easy enjoyment of digital sound. S-Force PRO Front Surround Sony’s long-term involvement in surround technology (and the vast amounts of acoustic data accumulated as a result) has led to the development of all-new processing method and advanced DSP to handle this task effectively, which we call S-Force PRO Front Surround. Compared with previous front surround technologies, S-Force PRO Front Surround...
Page 39
39GB Additional Information A A/V SYNC 30 AMP menu 28 AUDIO DRC 30 B Blu-ray Disc player (recorder) connecting 10 D DIGITAL MEDIA PORT connecting 14 DIMMER 31 DISPLAY 31 DUAL MONO 29 DVD player (recorder) connecting 10, 12 H HDMI connecting 10 I Installing 9 P “PlayStation 3” connecting 10 R Remote before use 8 operating 17 S Satellite tuner connecting 10, 12 Setting 9 S-Force PRO Front Surround 7 Sleep timer 32 Sound field 20 Speakers level 27 Index