Sony Rht G1500 Operating Instructions

3-291-730-21(1)
Theatre Stand 
System
©2008 Sony Corporation
RHT-G900
RHT-G1500 Operating Instructions
 

2GB
3
To reduce the risk of fire or electric 
shock, do not expose this apparatus to 
rain or moisture.
Do not install the appliance in a confined space, such as 
a bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the 
apparatus with news papers, table-cloths, curtains, etc. 
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects 
filled with liquids, such as vases, on the apparatus.
Batteries or batteries installed apparatus...

3GB
WARNING ..............................................4
CAUTION................................................5
Precautions ...............................................6
Main features ...........................................7
Getting Started
Supplied accessories ................................8
Setting this stand ......................................9
Connecting components with HDMI 
jacks .................................................11
Connecting components without HDMI 
jacks...

4GB
Do not lean on or hang from the 
TV when the TV is placed on the 
stand.
The TV may fall from the 
stand causing an accident 
resulting in serious injury or 
death.
Do not move the stand with the 
TV or other equipment installed 
on it.
Be sure to remove 
the TV and other 
equipment when 
moving the stand. If 
you fail to do so, the 
stand may lose 
balance and topple 
over resulting in serious injury.
Do not allow the AC power cord 
(mains lead) or the connecting 
cable to be pinched between the 
TV...

5GB
Do not place any heated objects 
such as a hot pan or a kettle on 
the stand. 
A top glass panel may break 
and cause injury. Or, it may 
cause damage to the stand.
Do not step on the stand.
You may fall, or 
break the glass and 
cause injury.
Do not subject the top glass panel 
to excessive shock.
This stand uses glass 
with an anti-scatter 
film, but care should 
still be taken. If the 
glass breaks, glass 
fragments could cause 
injury, so observe the 
precautions below.
 Do not hit the glass or...

6GB
On safety
 Do not place unspecified objects, such as a flower 
vase or pottery on the stand.
 Do not make alterations to the stand.
 Should any solid object or liquid fall into the stand, 
unplug the stand and have it checked by qualified 
personnel before operating it any further.
On power sources
 Before operating the stand, check that the operating 
voltage is identical to your local power supply. The 
operating voltage is indicated on the nameplate at the 
rear of the stand.
 The stand is not...

7GB
Main features
BEasy connection with HDMI
b
The cords are all tangled up. Neat connections (page 11).
BEasy operation with only one TV remote (“BRAVIA” Sync)
b
Separate remotes for each component. Consolidate operations on one remote 
(page 27).
BEasy Surround settings
b
I need lots of cords and speakers. Easy set-up with S-Force PRO Front 
Surround.
About S-Force PRO Front Surround
Sony’s long-term involvement in surround 
technology (and the vast amounts of acoustic data 
accumulated as a result)...

8GB
Please check the following accessories in the 
package.
Optical cable (1 m) (1)
Remote commander (RM-ANU032) (1)
Size AA (R6) batteries (2)
Top glass panel (1)
Corner protectors (4)
Support belt and two screws (small/large) 
(1)
Shelf board (1) (RHT-G900 only)
Shelf support pins (4) (RHT-G900 only)
FM wire antenna (aerial) (1)
Operating Instructions (1)
Inserting batteries into the 
remote
You can control the stand using the supplied 
remote. Insert two size AA (R6) batteries by 
matching the + and –...

9GB
Getting Started
Installing the top glass panel
Refer to “How to install the top glass panel” 
supplied with this stand.
Preventing the TV from 
toppling over
As a protective measure, secure the TV.
Perform following steps as a protective measure 
if you have a Sony LCD TV.
1Place the TV on the center of the stand.
Install the TV so that the TV does not hide 
the top panel display of the stand.
2Fasten the support belt (supplied) to 
the stand with the small screw 
(supplied).
Tighten the screw upward...

10GB
Connecting the FM wire 
antenna (aerial)
Connect the FM wire antenna (aerial) to the 
75 Ω COAXIAL jack.
 Be sure to fully extend the FM wire antenna (aerial).
 After connecting the FM wire antenna (aerial), keep it 
as horizontal as possible.
 If you have poor FM reception, use a 75-ohm coaxial 
cable (not supplied) to connect the control unit to an 
outdoor FM antenna (aerial) as shown below.
Bundling the cables
1Connect the components to the stand.
For details, refer to pages 11 to 15.
2Bundle...