Sony Projector VPL-VW350ES User Manual

31Function Menu
Using the Menus
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
Setting items Description
3D Settings You can change the settings of the 3D function.
2D-3D Display 
Sel.For Switching the video images to “2D” or “3D.”
Auto: Displays 3D video images when HDMI signals with 3D 
information* are input. Displays 2D video images when other signals 
are input.
3D: Displays 3D video images according to the 3D system selected in 
“3D Format.”...

32Function Menu
3D Depth Adjust For adjusting the depth of the 3D video images on the screen. The 
setting can be made only when a 3D Format other than “Simulated 3D” 
is selected.
We recommend that “3D Depth Adjust” be set to “0.” The 3D video 
images may be difficult to perceive, depending on the setting of “3D 
Depth Adjust.”
Simulated 3D 
EffectFor adjusting the 3D effect when 2D content is converted to 3D video 
images. You can select the effect from among “High,” “Middle,” and 
“Low.”
Tip
There are...

33Function Menu
Using the Menus
Group 1 Group 2
Items Locked by Settings Lock
Picture menu
Reset
Reality Creation
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
Color SpaceSetup menu
Status
Language
Menu Position
Cooling Setting
Remote Start
Network Management
Lamp Setting
Function menu
Dynamic Range
Test Pattern
Installation menu
Image Flip
Lens Control
Anamorphic...

34Installation Menu
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items Description
Image Flip Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally. 
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling 
installation.
Lens Control Avoids any operation of the lens such as “Lens...

35Installation Menu
Using the Menus
Blanking This feature allows you to adjust the displayable region within the four 
directions of the screen.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom 
using the M/m buttons.
Adjust the amount of blanking using the 

36Installation Menu
When “Zone” is selected: Select the position to adjust with 

37Information Menu
Using the Menus
Information Menu
The Information menu displays the model name, serial number, input signal type, software 
version and the cumulated hours of usage of the lamp.
You cannot adjust or change the displays listed above.
This unit has default image data to adjust preset data for input signals appropriately according 
to the signals shown in “Preset Signals” (page 52) (the preset memory). When the preset signal 
is input, the unit automatically detects the signal type and...

38Displaying the Control Window of the Unit with a Web Browser
Connection to the network allows you to 
operate the following features:
 Checking the current status of the unit 
via a Web browser.
 Making the network settings for the 
unit.
 Network monitoring and controlling 
with control protocol (SDAP 
[Advertisement], SDCP [PJ Talk], 
DDDP [AMX], Crestron RoomView, 
Control4).
 When connecting this projector with the 
network, consult with the person who sets up 
the network. The network must be...

39Operating the Control Window
Using Network Features
Once you make the network settings, 
you can open the Control window only 
by performing step 3 of this procedure.
Operating the 
Control Window
Click one of the Page Switching buttons to 
display the desired setting page.
You can limit a user for accessing any 
particular page.
Administrator: Allowed access to all 
pages
User: Allowed access to all pages 
except the Setup page
Set under [Password] of the Setup page.
When you access the Setup page for...

40Operating the Control Window
If you forget your password, consult with 
qualified Sony personnel.
You can confirm the current settings for the 
unit on the Information page.
Note
Confirming the Information 
Regarding the Unit
Information area