Sony Projector VPL-SW631C User Manual

41Using Network Features
Network
The factory setting of the security 
method and its password are set as 
follows.
Security method: WEP 64bit
Password: sony1
(b) Input the settings for Client 
Mode.
When the USB wireless LAN module is 
activated as a client, set the items for the 
client (set the items for the access point 
the projector tries to connect to).
Connection Status: Displays the 
connecting status between the access 
point and projector.
SSID: Input the SSID of access point the 
projector...

42Using Network Features
-Subnet Mask: Input the subnet mask of 
the projector.
-Default Gateway: Input the default 
gateway of the projector.
-Primary DNS: Input the primary DNS 
server of the projector.
-Secondary DNS: Input the secondary 
DNS server of the projector.
MAC Address: Displays the MAC 
address for USB wireless LAN 
module.
Change the label names for the input 
terminals that will be displayed on the 
projected screen on the Setup page. The 
entered label names will not be applied 
unless...

43Using Network Features
Network
1Click on [Advanced Menu] to 
display the buttons for more 
settings.
2(a)Set Advertisement.
Start Advertisement Service: 
Set Advertisement to enabled or 
disabled. Items for Advertisement are 
enabled only when this function is 
enabled. The function is disabled at the 
factory default.
-Community: 
Input the community name for 
Advertisement and PJ Talk. If the 
community name for Advertisement is 
changed, the one for PJ Talk will also be 
changed. Only four...

44Using Network Features
be changed from the factory setting to 
avoid unnecessary access to the 
projector from other computers.
-Port No.:
Input the server port of PJ Talk. The 
factory default setting is “53484.”
-Timeout:
Input the time until PJ Talk 
communication is terminated in the case 
that it is disconnected. The factory 
default setting is “30.”
-Host Address:
Input the IP address that the PJ Talk 
server is allowed to receive. If no IP 
address is input, receiving commands 
will be allowed...

45Using Network Features
Network
(e)Reset the network settings.
Reset:
Reset all Web browser settings to their 
factory defaults.
Reset button Reset 

46Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
BInteractive Function
Using Interactive Presentation Utility 2
 (VPL-SW636C/SW631C only)
Using the mouse function of the Interactive Pen Device (main only), you can control a 
computer and applications on the projected screen just like a mouse. Also when employing the 
drawing function of a different application, you can use the Interactive Pen Device to directly 
draw onto the projected file, and save the drawings.
How to operate the...

47Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
Interactive Function
 The interactive function works by a detector in the projector, which picks up infrared rays emitted 
from the tip of the Interactive Pen Device. Observe the precautions noted below.
- Avoid placing the projector where the Interactive Pen detector is directly exposed to fluorescent 
light or other strong light.
- Do not cover the pen tip of the Interactive Pen Device or the Interactive Pen detector.
- Infrared data...

48Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
3Follow the on-screen instructions to install the software.
To uninstall Interactive Presentation Utility 2, click [Start]-[All Programs]-[Interactive 
Presentation Utility 2]-[Uninstall].
Setting Interactive Presentation Utility 2
1Connect the projector and computer with the AV cable and USB cable (page 47), and 
project the image with the projector.
For details on connecting the AV cable (Mini D-sub 15-pin cable or HDMI cable) for...

49Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
Interactive Function
Calibration Auto/Manual 
Calibration aligns the points where the pen 
(Main and Sub) is pointing and where the 
projector displays the cursor on the screen. 
“Calibration Auto” allows you to execute the 
calibration automatically.
Click “Calibration” to select “Calibration 
(Auto).” The calibration starts automatically.
Operating with the Interactive Pen 
Device
With the Interactive Pen Device, you can use 
the...

50Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
Installing Interactive Presentation Utility 2
System Requirements
 CPU: Pertium III or faster
 Memory: 256MB or more (512MB Recommend)
 Available hard drive space: 250MB
 OS: Mac OS X 10.6.x/10.7.x/10.8.x/10.9.x/10.10.x
Use of the interactive function requires installation of Interactive Presentation Utility 2.
1Close all running applications.
2In the CD-ROM, double-click [Interactive Presentation Utility 2.pkg].
3Follow the on-screen...