Sony Projector VPL-SW535C User Manual
Have a look at the manual Sony Projector VPL-SW535C User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41Replacing the Lamp Others 3Loosen the 2 screws on the lamp then pull out the lamp by its grab. 4Insert the new lamp all the way in until it is securely in place. Tighten the 2 screws. 5Close the lamp cover and tighten the 1 screw. Be sure to install the lamp securely as it was. If not, the projector cannot be turned on. 6Connect the AC power cord to a wall outlet and turn on the projector. 7Reset the lamp timer for notification of the next replacement time. Select “Lamp Timer Reset” on the Function menu then press the ENTER key. When a message appears, select “Yes” to reset the lamp timer (page 22). Disposal of the used lamp For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Telecommunications Industry Association (www.eiae.org). Grab Note Caution
42Cleaning the Air Filter Cleaning the Air Filter When a message appears on the projected image indicating time for a filter cleaning, clean the air filter (pages 36, 37). If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. 1Turn off the projector, and disconnect the AC power cord from the AC outlet. 2Open the air filter cover and remove the air filter holder. Press A and open the air filter cover towards the arrow head as illustrated below, and remove the air filter holder. Push B, and remove the air filter holder in the direction of the arrow. 3Clean the air filter with a vacuum cleaner. Remove the air filter as illustrated below then clean with the vacuum cleaner. The air filter consists of 2 filters (A, B). Caution Air filter cover A Air filter holder B Claws A B
43Cleaning the Air Filter Others 4Reattach the air filter cover to the unit. Be sure to attach the air filter cover firmly. If not, the projector cannot be turned on. Note A B
44Specifications Specifications ItemsDescriptions ModelVPL-SW535C/SW525C/SW535/SW525/VPL-SX535 Projection system 3 LCD system Display device Effective display sizeVPL-SW535C/SW525C/SW535/SW525: 0.75 inch (19.0 mm), 3 plate panels, Aspect ratio 16:10 VPL-SX535: 0.63 inch (16.0 mm), 3 plate panels, Aspect ratio 4:3 Effective picture elementsVPL-SW535C/SW525C/SW535/SW525: 3,072,000 pixels (1280 × 800 pixels, 3 plate panels) VPL-SX535: 2,359,296 pixels (1024 × 768 pixels, 3 plate panels) Projection lens Zoom Manual zoom approx.1.05 times Focus Manual Light source High-pressure mercury lamp, 210 W type Projected image sizeVPL-SW535C/SW525C/SW535/SW525: 70 inches to 130 inches (1.78 m to 3.30 m) VPL-SX535: 60 inches to 110 inches (1.52 m to 2.79 m) Luminous flux (Brightness)VPL-SW535C/SW535/VPL-SX535: 3000 lm VPL-SW525C/SW525: 2500 lm (when “Lamp Mode” is set to “High”) Speaker VPL-SW535C/SW525C/SW525: 10 W × 1 (monaural) VPL-SW535/VPL-SX535: 1 W × 1 (monaural) Applicable scanning frequency *1 Horizontal: 14 kHz to 93 kHz, Vertical: 47 kHz to 93 kHz Resolution *1When a computer signal is inputMaximum display resolution: 1600 × 1200 pixels (resize) Panel display resolution: VPL-SW535C/SW525C/SW535/SW525: 1280 × 800 pixels VPL-SX535: 1024 × 768 pixels When a video signal is inputNTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p Color system NTSC 3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
45Specifications Others INPUT OUTPUT (Computer/video)INPUT ARGB/YPBPR input connector: Mini D-sub 15 pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms INPUT B (VPL-SW535C/ SW525C/ SW535/SW525 only)HDMI input connector: HDMI 19-pin, HDCP, HDMI audio support INPUT B (VPL-SX535 only)RGB input connector: Mini D-sub 15-pin female, RGB: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: TTL level high impedance, positive/negative Audio input connector: Stereo mini jack, rated input 500 mVrms, input impedance more than 47 kohms S VIDEO (S VIDEO IN)S video input connector: Mini DIN 4-pin, Y: 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated, C: (burst signal) 0.286 (NTSC)/0.3 (PAL/SECAM) Vp-p ± 2 dB, 75 ohms terminated Audio input connector: Phono jack × 2, rated input 500 mVrms, Input impedance more than 47 kohms VIDEO (VIDEO IN)Video input connector: Pin jack, 1 Vp-p ± 2 dB, sync negative, 75 ohmes terminated Audio input connector: Shared with S VIDEO IN OUTPUTMONITOR output connector: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/P BPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75 ohms), positive/negative Audio output connector: Stereo mini jack, stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), output impedance 5 kohms Other conncectorsRS-232C connector: D-Sub 9 pin male LAN connector: RJ45, 10BASE-T/100BASE-TX USB connector: Type B (VPL-SW535C/SW525C only) Operating temperature/ Operating humidity0 °C to 40 °C (32 °F to 104 °F)/35% ~ 85% (no condensation) Storage temperature/ Storage humidity–20 °C to +60 °C (–4 °F to 140 °F)/10% to 90% (no condensation) Power requirementsVPL-SW535C/SW525C/SW525: 100 V to 240 V AC, 3.5-1.2 A, 50/60 Hz VPL-SW535: 100 V to 240 V AC, 3.3-1.2 A, 50/60 Hz VPL-SX535: 100 V to 240 V AC, 3.6-1.4 A, 50/60 Hz ItemsDescriptions ModelVPL-SW535C/SW525C/SW535/SW525/VPL-SX535
46Specifications *1: For details, refer to “Acceptable Input Signals*1” on page 49. *2: Information on accessories in this manual is current as of March 2012. *3: Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer. Design and specifications of the unit, including the optional accessories, are subject to change without notice.Power consumptionVPL-SW535C/SW525C/SW535/SW525: 100 V to 120 V AC: 290 W 220 V to 240 V AC: 280 W VPL-SX535: 100 V to 120 V AC: 310 W 220 V to 240 V AC: 300 W Standby power VPL-SW535C/SW525C/SW525: 100 V-120 V AC: 7.5 W (when “Standby Mode” is set to “Standard”)/0.2 W (when “Standby Mode” is set to “Low”) 220 V-240 V AC: 7.5 W (when “Standby Mode” is set to “Standard”)/0.3 W (when “Standby Mode” is set to “Low”) VPL- SW535/SX535: 100 V-240 V AC: 8.0 W (when “Standby Mode” is set to “Standard”)/0.3 W (when “Standby Mode” is set to “Low”) Heat dissipation VPL-SW535C/SW525C/SW535/SW525: 100 V AC: 989 BTU 240 V AC: 955 BTU VPL-SX535: 100 V AC: 1,057 BTU 240 V AC: 1,023 BTU Standard dimensions (W/H/D)Approx. 384.4 × 161.1 × 423.4 mm (15 1/8 × 6 11/32 × 16 21/32 inches) Approx. 384.4 × 122.5 × 423.4 mm (15 1/8 × 4 13/16 × 16 21/32 inches) (without projecting parts) Mass VPL-SW535C/SW525C: Approx. 7.1 kg (15 lb 10 oz) VPL-SW535/SW525/SX535: Approx. 7.0 kg (15 lb 7 oz) Supplied accessoriesSee “Checking the Supplied Accessories” in the supplied Quick Reference Manual. Optional accessories *2 *3Projector Lamp LMP-E212 (for replacement) Interactive Pen Device IFU-PN100M/IFU-PN100S ItemsDescriptions ModelVPL-SW535C/SW525C/SW535/SW525/VPL-SX535 Notes
47Specifications Others Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
48Specifications Pin assignment HDMI connector (HDMI, female) RGB input connector (Mini D-sub 15-pin, female) RS-232C connector (D-Sub 9-pin, male) 1 T.M.D.S. Data2+11 T.M.D.S. Clock Shield 2 T.M.D.S. Data2 Shield12 T.M.D.S. Clock – 3 T.M.D.S. Data2 –13 N.C. 4 T.M.D.S. Data1+14 RESERVED (N.C.) 5 T.M.D.S. Data1 Shield15 SCL 6 T.M.D.S. Data1 –16 SDA 7 T.M.D.S. Data0+17 DDC GND 8 T.M.D.S. Data0 Shield18 +5V Power 9 T.M.D.S. Data0 –19 Hot Plug Detect 10 T.M.D.S. Clock+ 1 2 19 18 1 Video input (red) R9Power supply input for DDC 2 Video input (green) G10 GND 3Video input (blue) B11 GND 4 GND 12 DDC/SDA 5 RESERVE 13 Horizontal sync signal 6 GND (R) 14 Vertical sync signal 7 GND (G) 15 DDC/SCL 8 GND (B) 1NC 6NC 2RXDA 7RTS 3TXDA 8CTS 4DTR 9NC 5 GND 5 1 9 6
49Specifications Others USB connector (Type B, female) Acceptable Input Signals*1 Computer signal 1 VCC (+5 V) 2 Data- 3 Data+ 4 Ground Signal VPL- SW535C/ SW525C/ SW535/ SW525 VPL-SX535 Input connectorInput connector RGB/ YPBPRHDMIRGB/ YPBPRRGB VGA-1 (VGA350) zzz VESA 85 (VGA350)zzz VGA-2 (TEXT)/ VESA70zzz VESA 85 (VGA400)zzz VESA 60zzzz Mac 13zzz VESA 72zzz VESA 75 (IBM M3)zzz VESA 85 (IBM M4)zzz 800 × 600 VESA 56zzz 800 × 600 VESA 60zzzz 800 × 600 VESA 72zzz 800 × 600 VESA 75 (IBM M5)zzz 800 × 600 VESA 85zzz Mac 16zzz XGA VESA 60zzzz XGA VESA 70zzz XGA VESA 75zzz XGA VESA 85zzz 1152 × 864 VESA 70zzz 1152 × 864 VESA 75zzz 1152 × 864 VESA 85zzz SUN LOzzz 1280 × 960 VESA 60zzzz 1280 × 960 VESA 75zzz SXGA VESA 60zzzz SXGA VESA 75zzz SXGA VESA 85zzz SXGA+/60zzzz UXGA VESA 60zzzz 1280 × 768/60zzzz 1280 × 720/60zz*2zz 1920 × 1080/60z*3 1366 × 768/60zzzz 1440 × 900/60zzzz 1280 × 800/60zzzz Signal VPL- SW535C/ SW525C/ SW535/ SW525 VPL-SX535 Input connectorInput connector RGB/ YPBPRHDMIRGB/ YPBPRRGB
50Specifications Digital TV signal Analog TV signal *1: When a signal other than the signals listed in table is input, the picture may not be displayed properly. An input signal meant for screen resolution different from that of the panel will not be displayed in its original resolution. Text and lines may be uneven. *2: This is identified as a movie delivery signal of 720/60p. *3: This is identified as a movie delivery signal of 1080/60p. Signal VPL-SW535C/ SW525C/ SW535/SW525VPL-SX535 Input connectorInput connector RGB/ YPBPRHDMIRGB/ YPBPR 480/60izz z 576/50izz z 480/60p (double-speed NTSC)zz z 576/50p (double-speed PA L )zz z 1035/60i, 1080/60izz z 1080/50izz z 720/60pzz z 720/50pzz z 1080/60pz 1080/50pz Signal VPL- SW535C/ SW525C/ SW535/ SW525 VPL-SX535 Input connectorInput connector VIDEO / S VIDEOVIDEO / S VIDEO 60 Hz zz 50 Hzzz Notes