Sony Projector Vpl Px15 User Manual
Here you can view all the pages of manual Sony Projector Vpl Px15 User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 (GB) To connect 15k RGB/Component equipment Notes • Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal. For details, see page 30 (GB). • When you connect the projector to 15k RGB/ component video equipment, select RGB, component or VCR GBR with the INPUT-A setting in the SET SETTING menu. • Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment. MOUSE CTRL S PLUG IN POWER AUDIO AUDIOVIDEOS VIDEO INPUT A~AC IN...
Page 22
22 (GB) Connection using a wireless LAN PC card INPUT B PC CARD INPUT A~AC IN PUSH Connecting the Projector Left side of the projector Wireless LAN PC card (IEEE802.11b compliant) (recommended) Computer Wireless LAN access point (IEEE802.11b compliant) (recommended)Wireless LAN PC card (IEEE802.11b compliant) (specified) to Hub/router Wireless LAN PC card (IEEE802.11b compliant) (recommended)Computer Connection using a wireless LAN PC card (Peer to Peer mode) INPUT B PC CARD INPUT A~AC IN PUSH Left side...
Page 23
23 (GB) ......................................................................................................................................................................................................... 1) PowerPoint is a registered trademark of Microsoft Corporation (U.S.A. and other countries). INPUT B PC CARD INPUT A~AC IN PUSH Computer Left side of the projector to router LAN cableHubComputer Computer LAN cableLAN cable LAN cable Connecting using the ETHER connector Installing a memory card If...
Page 24
24 (GB) HELP LAMP/ COVERTEMP/ FANPOWER SAVINGON/ STANDBY RESET APA VOLUME ENTERINPUT MENU MUTINGPICAUDIO HELP APA LASER INPUTD KEYSTONE FREEZE PJ NETWORKON COMMAND OFF VOLUME ENTER FUNCTION RM-PJM15 PROJECTOR D ZOOMCLICKRESET/ ESCAPE MENU/ TAB R 1 23 2 332 I / 1 INPUT FREEZE MENU ENTER D KEYSTONEMS SLIDE RESET FUNCTIOND ZOOM12 APA + –RCLICK Selecting the Menu Language / Projecting 5Press the M or m key to select LANGUAGE, then press the , or ENTER key. 6Press the M or m key to select a language, then...
Page 25
25 (GB) Notes •Adjust the signal when a still picture is displayed on the screen. •Press the APA key when the full image is displayed on the screen. If there are black edges around the image, the APA function will not function properly and the image may extend beyond the screen. •If you switch the input signal or re-connect a computer, press the APA key again to get the suitable picture. •“ADJUSTING” appears on the screen. To restore the original screen, press the APA key again during the adjustment....
Page 26
26 (GB) To enlarge the image (Digital Zoom function) You can enlarge an area on the image you select. This function works only when a signal from a computer is input. 1Project the original size picture and press the D ZOOM + key on the Remote Commander. The Digital Zoom icon appears in the center of the image. 2Move the icon to a point in the center of the portion of the image you want to enlarge. Use the arrow keys (M/m/
Page 27
27 (GB) Using the Menu Using the Menu The projector is equipped with an on-screen menu for making various adjustments and settings. Note (VPL-PX15/PX10 only) Before operation, confirm that the PJ/NETWORK select switch on the Remote Commander is set to PJ. If it is set to NETWORK, the menu display will not appear even when you press the MENU key on the Remote Commander. To select the language used in the menu, see page 23 (GB). 1Press the MENU key. The menu display appears. The menu presently selected is...
Page 28
28 (GB) The PICTURE CTRL Menu The PICTURE CTRL Menu The PICTURE CTRL (control) menu is used for adjusting the picture. Unadjustable items for a particular input signal are not displayed in the menu. Operation 1. Select an item Use the M or m key to select the item, then press the , or ENTER key. 2. Adjust an item •When changing the adjustment level: To increase the value, press the M or , key. To decrease the value, press the m or < key. Press the ENTER key to restore the original screen. •When changing...
Page 29
29 (GB) COLOR SYS (System) Selects the color system of the input signal. AUTO: Automatically selects one of the following signals: NTSC 3.58, PAL, SECAM, NTSC4.43. PAL-M/N: Automatically selects one of the following signals: PAL-M/PAL-N, NTSC 3.58. Normally, set to AUTO. If the picture is distorted or colorless, select the color system appropriate to the input signal. VOLUME Adjusts the volume. The volume can be adjusted for each of INPUT A, INPUT B (VPL-PX15 only), VIDEO and S VIDEO input. Input signals...
Page 30
30 (GB) SIZE H Adjusts the horizontal size of the picture input from the INPUT A/B connector. The higher the setting, the larger the horizontal size of the picture. The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal. For details on a suitable value for preset signals, see page 31 (GB). SHIFT Adjusts the position of the picture input from the INPUT A/B connectors or video input connectors. H adjusts the horizontal position of...