Sony Projector Vpl Ps10 User Manual

11 (GB)
How to use the adjusters
To adjust the height
Adjust the height of the projector as follows:
1Lift the projector and press the adjuster buttons.
The adjusters will extend from the projector.
2While pressing the buttons, adjust the height.
Then, release the buttons.
The adjusters will lock, then the height of the
projector will be fixed. For fine adjustment, turn
the adjusters to the right or left.
Note
If the adjusters have been extended to the limit
and you keep turning the adjusters...

12 (GB)
7 INPUT key
Selects the input signal. Each time you press the key,
the input signal switches as follows:
Notes
•You can select INPUT-B only if INPUT-B FUNC. in
the INSTALL SETTING menu has been set to ON.
INPUT-B is only available for the VPL-PX15.
•The audio signals are the same for the VIDEO and
S-VIDEO.
•The audio signals are the same for the INPUT-A and
INPUT-B.
8 I / 1 (on / standby) key
Turns the projector on and off when the projector is in
the standby mode. The ON/STANDBY indicator
lights...

13 (GB)
Location and Function of Controls
Connector Panel
Left side
INPUT B
PC CARDMOUSE
CTRL SPLUG IN POWERAUDIO
AUDIOVIDEOS VIDEO
INPUT A~AC IN
INPUT B
PC CARDMOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIOVIDEOS VIDEO
INPUT A~AC IN
56 7 8
4321
PUSH
1 AC IN socket
Connects the supplied AC power cord.
2 INPUT A connectors
Connect to external equipment such as a computer.
INPUT A connector (HD D-sub 15-pin, female):
Connects to the monitor output on a computer
using the supplied cable.
When inputting a component...

14 (GB)
Location and Function of Controls
Remote Commander (supplied with
the VPL-PX15/PX10)
Keys which have the same names as those on the
control panel function identically.
Notes on the laser beam
•Do not look into the laser transmitter.
•Do not aim the laser at people.
1 
I / 1 (on / standby) key
2 MUTING keys
Cut off the picture and sound.
PIC: Cuts off the picture. Press again to restore the
picture.
AUDIO: Cuts off the sound from the speakers. Press
again or press the VOLUME + key to restore the...

15 (GB)
Location and Function of Controls
qf RESET/ESCAPE key
When the PJ/NETWORK select switch is set to
PJ: Functions as the RESET key.
When the PJ/NETWORK select switch is set to
NETWORK (VPL-PX15 only): Functions as the
ESCAPE key of the keyboard when the INPUT B
window is displayed.
qg D ZOOM +/– key
Enlarges the image at a desired location on the screen.
This key works only when a signal from a computer is
input.
+: Pressing the + key once displays the icon. This
icon indicates the point you want...

16 (GB)
Location and Function of Controls
Battery installation
1Push and slide to open the lid, then install the two
R6 (size AA) batteries (supplied) with the correct
polarity.
2Replace the lid.
Notes on batteries
•Make sure that the battery orientation is correct when
inserting batteries.
•Do not mix an old battery with a new one, or
different types of batteries.
•If you do not intend to use the Remote Commander
for a long time, remove the batteries to avoid damage
from battery leakage. If batteries...

17 (GB)
8 RESET key
Resets the value of an item to its factory preset value
or returns the enlarged image back to its original size.
9 D ZOOM +/– key
Enlarges the image at a desired location on the screen.
This key works only when a signal from a computer is
input.
+: Pressing the + key once displays the icon. This
icon indicates the point you want to enlarge. Use
an arrow key (M/m/

18 (GB)
Installing the Projector / Connecting the Projector
Installing the Projector
This section describes how to install the projector.
The distance between the lens and the screen varies
depending on the size of the screen. Use the following
table as a guide.
For details, see “Installation Example” on page 34 (GB).
For details on ceiling installation, consult with qualified
Sony personnel (fee charged).
Distance between the screen
and the center of the lens
Unit: m (feet)
Screen
size40 60 80 100 120...

19 (GB)
Connecting the Projector
Setting Up and ProjectingOn the USB function
When connecting the projector to a computer using
the USB cable for the first time, the computer
recognizes the following devices automatically.
1USB hub (general use)
2USB human interface device (wireless mouse
function)
3USB human interface device (projector control
function)
The computer also recognizes the device connected to
the downstream connector on the projector.
Recommended operating environment
When you use the USB...

20 (GB)
Connecting to a VCR or 15k RGB/
Component Equipment
This section describes how to connect the projector to
a VCR or 15k RGB/component equipment.
For more information, refer to the instruction manuals
of the equipment you are connecting.
To connect a VCR
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIOVIDEOS VIDEO
INPUT A~AC IN
S-Video
cable (not
supplied) Left side
to audio
outputVideo
cable (not
supplied)
VCRto S video
output to video
output...