Sony Projector VPL-HW65 User Manual

31
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
Setting items Description
3D Settings You can change the settings of the 3D function.
2D-3D Display 
Sel.For Switching the video images to “2D” or “3D.”
Auto: Displays 3D video images when HDMI signals with 3D 
information* are input. Displays 2D video images when other signals 
are input.
3D: Displays 3D video images according to the 3D system selected in 
“3D Format.” However, when HDMI signals...

32
3D Glasses 
Bri’nessFor adjusting the brightness of the picture when watching 3D video 
images. 
You can select the brightness from among “High,” “Medium,” and 
“Low.”
3D Depth Adjust For adjusting the depth of the 3D video images on the screen. The 
setting can be made only when a 3D Format other than “Simulated 3D” 
is selected.
We recommend that “3D Depth Adjust” be set to “0.” The 3D video 
images may be difficult to perceive, depending on the setting of “3D 
Depth Adjust.”
Simulated 3D 
EffectFor...

33
Group 1 Group 2
Items Locked by Settings Lock
Picture menu
Reset
Reality Creation
Advanced Iris
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
Color SpaceSetup menu
Status
Language
Menu Position
High Altitude Mode
Remote Start
Network Management
Lamp Setting
Function menu
Dynamic Range
Installation menu
Image Flip
Trigger Select
Panel Alignment
Network Setting 

34
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items Description
Image Flip Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally. 
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling 
installation.
Trigger Select Switches the output function of the TRIGGER connector.
Off: Turns...

35
Panel Alignment This feature allows you to adjust the gaps in the color of characters or 
the picture on the screen.
On: Adjusts the gaps in the colors selecting “Adjust Color” or “Adjust 
Item.”
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color. 
Select “R” (Red) or “B” (Blue) to make adjustments based on “G”...

36
Network Setting Perform internet protocol settings.
IPv4 SettingIP Address Setup: Selects the IP address setting method.
Auto(DHCP): The IP address is assigned automatically from the 
DHCP server such as a router.
Manual: Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item 
with the 

37
Information Menu
The Information menu displays the model name, serial number, input signal type, software 
version and the cumulated hours of usage of the lamp.
You cannot adjust or change the displays listed above.
This unit has default image data to adjust preset data for input signals appropriately according 
to the signals shown in “Preset Signals” (page 53) (the preset memory). When the preset signal 
is input, the unit automatically detects the signal type and recalls the data for the signal...

38
Connection to the network allows you to 
operate the following features:
 Checking the current status of the unit 
via a Web browser.
 Making the network settings for the 
unit.
 Network monitoring and controlling 
with control protocol (SDAP 
[Advertisement], SDCP [PJ Talk], 
DDDP [AMX], Crestron RoomView, 
Control4).
 When connecting this projector with the 
network, consult with the person who sets up 
the network. The network must be secured.
 When using this projector connected with the 
network,...

39
Once you make the network settings, 
you can open the Control window only 
by performing step 3 of this procedure.
Operating the 
Control Window
Click one of the Page Switching buttons to 
display the desired setting page.
You can limit a user for accessing any 
particular page.
Administrator: Allowed access to all 
pages
User: Allowed access to all pages 
except the Setup page
When you access the Setup page for the first 
time, input “root” as the user name and 
“Projector” as the password in the...

40
The password can be changed in the 
Password page in the Setup page.
When you change the password, input a new 
password after deleting the password 
(*****) that was set.
The password of the administrator and user 
should be 8 to 16 characters that includes 
both alphabet and numeric characters. 
Alphabet is case-sensitive.
The default password “Projector” cannot be 
set as a new password. 
If you forget your password, consult with 
qualified Sony personnel.
You can confirm the current settings for...